Graco SnugRide 35 Lite LX Infant Car Seat and TurboBooster 2.0 Backless Booster Car Seat Bundle Instruction Manual

Ọja Pariview

The Graco SnugRide 35 Lite LX Infant Car Seat and Graco TurboBooster 2.0 Backless Booster Car Seat bundle provides a comprehensive travel solution for children from infancy through their booster seat years. The lightweight SnugRide 35 Lite LX is designed for rear-facing infants weighing 4-35 pounds and up to 32 inches tall. It includes features such as a 4-position adjustable base, two-piece head and body supports, and a rotating canopy for customized comfort. Weighing only 7.2 pounds, this infant car seat is easy to transport between car and stroller. Once your child outgrows the rear-facing infant seat, the TurboBooster Backless Booster facilitates their transition to front-facing use. This booster accommodates children weighing 40-100 pounds and up to 57 inches tall, ensuring proper seat belt positioning. Both car seats incorporate Graco ProtectPlus Engineering, which involves rigorous crash testing to protect your child in frontal, side, rear, and rollover impacts. This bundle prioritizes safety, comfort, and convenience, adapting to your child's evolving needs.

Image: The Graco SnugRide 35 Lite LX Infant Car Seat and TurboBooster 2.0 Backless Booster Car Seat Bundle.

Key Awọn ẹya ara ẹrọ

• SNUGRIDE PERFORMANCE: Infant car seat designed for rear-facing infants from 4-35 lb and up to 32 inches.
• LIGHTWEIGHT CARRIER: Infant car seat weighs only 7.2 lb, facilitating easy portability.
• Ijoko ALAGBARA: Backless booster is highly rated by consumer publications.
• GRACO PROTECTPLUS ENGINEERED: Undergoes rigorous crash tests for protection in frontal, rear, and rollover impacts.
• ADJUSTABLE COMFORT: Features height-adjustable armrests for child's comfort in the booster seat.
• ADJUSTABLE BASE: The SnugRide 35 Lite LX includes a 4-position adjustable base with a level indicator for proper installation.
• NEWBORN INSERT: Comes with a removable newborn insert for smaller infants (removable once child is over 11 lbs).
• EASY HARNESS ADJUSTMENT: Features a button for easy loosening and tightening of harness straps.
• SUNSHADE: Includes a good sunshade for infant protection.
• SMOOTH HANDLE: The car seat handle operates smoothly for easy carrying.

Eto ati fifi sori

SnugRide 35 Lite LX Infant Car Seat

The SnugRide 35 Lite LX infant car seat is designed for rear-facing installation. It comes with a base that simplifies installation in your vehicle.

1. Install the Car Seat Base:

   The car seat base is designed for easy installation. Attach the two hooks into the vehicle's seat anchors. Pull the strap to tighten the base securely. Ensure the base is level using the built-in bubble level indicator on the side to achieve the correct angle for the car seat.

   

   Image: Close-up of the 4-position adjustable base with its level indicator, showing how to ensure correct installation angle.
2. Attach the Infant Car Seat: Once the base is securely installed, simply click the SnugRide 35 Lite LX infant car seat into the base. Ensure it is firmly seated and does not wobble.

TurboBooster 2.0 Backless Booster Car ijoko

The TurboBooster 2.0 is a backless booster designed for front-facing use with your vehicle's seat belt system.

1. Ipo: Place the booster seat firmly on the vehicle's seat. Ensure it is stable and does not slide.
2. Ibi ọmọ: Seat your child on the booster. The booster raises your child to the proper height for the vehicle's seat belt.
3. Seat Belt Routing: Route the vehicle's lap and shoulder belt through the designated guides on the booster seat. The lap belt should fit low across the hips, and the shoulder belt should rest across the center of the child's shoulder and chest.

Awọn ilana Iṣiṣẹ

SnugRide 35 Lite LX Infant Car Seat

• Securing Your Infant: Place your infant in the car seat. Fasten the 5-point harness system. Ensure the harness straps are snug against your child's body.
• Adjusting Harness: To loosen the harness straps, press the button located at the front of the seat and pull the straps. To tighten, pull the strap at the bottom of the seat until snug.
• Fi sii ọmọ tuntun: For infants under 11 lbs, use the provided newborn insert for additional support. Remove the insert once your child exceeds 11 lbs.
• Atunṣe ibori: Adjust the rotating canopy to shield your infant from sun or light.
• Ipo mimu: The handle can be adjusted for carrying or for positioning in the vehicle. Refer to the labels on the car seat for appropriate handle positions during travel.

Image: The Graco SnugRide 35 Lite LX Infant Car Seat, showing its full design and harness system.

Image: An infant properly secured in the Graco SnugRide 35 Lite LX, demonstrating appropriate fit and use.

TurboBooster 2.0 Backless Booster Car ijoko

• Awọn ibeere ọmọde: Use for children weighing 40-100 pounds and up to 57 inches tall.
• Seat Belt Fit: Always ensure the vehicle's lap and shoulder belt are correctly positioned across your child. The lap belt should be low on the hips, touching the thighs, and the shoulder belt should cross the middle of the shoulder and chest.
• Awọn dimu Cup: Utilize the hide-away cup holders for convenience.

Image: The Graco TurboBooster 2.0 Backless Booster Car Seat, showcasing its design and integrated cup holders.

Image: A child demonstrating the use of the Graco TurboBooster 2.0, highlighting proper seat belt positioning.

Itoju

Regular maintenance ensures the longevity and safety of your car seats. Always refer to the specific cleaning instructions on the product labels.

• Aṣọ Mimọ: Fabric covers can typically be removed and machine washed on a gentle cycle with cold water. Air dry or tumble dry on low. Do not use bleach.
• Cleaning Harness Straps: Fi ìpolówó nu awọn okùn ìdènàamp cloth. Do not machine wash or submerge harness straps, as this can weaken the webbing.
• Cleaning Plastic/Metal Parts: Wipe plastic and metal parts with mild soap and cool water.
• Ayewo: Periodically inspect the car seats for any signs of wear, damage, or missing parts. Check the harness system, buckles, and LATCH connectors for proper function.

Laasigbotitusita

If you encounter issues with your Graco car seats, consider the following common solutions:

• Ìjánu tó fún pọ̀ jù/díẹ̀ Ensure you are pressing the harness release button (usually located near the child's feet) before attempting to loosen the straps. Pull the adjustment strap firmly to tighten.
• Car Seat Not Level: Re-check the installation of the car seat base. Use the built-in level indicator to ensure the correct recline angle. Adjust the base's recline mechanism if necessary.
• Difficulty Latching/Unlatching Buckle: Check for any debris or obstructions in the buckle mechanism. Clean if necessary. Ensure the buckle tongues are inserted straight and fully.
• Booster Seat Sliding: Ensure the booster seat is placed firmly on the vehicle's seat. While booster seats are not typically anchored, a stable placement is crucial.
• General Safety Concerns: Always refer to the complete instruction manual provided with your product for detailed safety guidelines and troubleshooting steps. If you are unsure about any aspect of installation or use, contact Graco customer support or a certified Child Passenger Safety Technician.

Awọn pato

Atilẹyin ọja ati Support

For detailed warranty information, product registration, or customer support, please refer to the official Graco website or the warranty card included with your product. It is recommended to register your product to receive important safety updates and recall information.

You can typically find support resources, FAQs, and contact information on the Graco official webojula.