HOMCOM 4-Tier Media Cabinet with Tempered Glass Doors

Ọrọ Iṣaaju

This manual provides essential information for the assembly, operation, and maintenance of your HOMCOM 4-Tier Media Cabinet. Designed for organizing audio-visual equipment, vinyl records, and other media, this cabinet features adjustable shelves, tempered glass doors, and integrated cable management. Please read these instructions thoroughly before assembly and use to ensure safe and proper functionality.

Alaye Aabo

• Agbara iwuwo: Do not exceed the maximum weight capacity of 66 lbs (total) or 11 lbs per single tier. Overloading can cause instability and damage.
• Ẹrọ Idaabobo-Toppling: An anti-toppling device is included to enhance stability and prevent accidental tipping. It is highly recommended to install this device securely to a wall, especially in households with children or pets.
• Gilasi ibinu: Handle glass components with care. Tempered glass is designed to be safer than regular glass, but it can still break if subjected to sharp impacts.
• Apejọ: Follow all assembly instructions carefully. Ensure all fasteners are tightened securely before use. Do not use power tools for tightening screws unless explicitly instructed, as this may strip threads or damage components.
• Ibi: Place the cabinet on a level, stable surface. Avoid placing it in areas with high humidity or direct sunlight, which can affect the material's integrity.
• Ilana 65 Ikilọ: Ọja yii le ni awọn kẹmika ti a mọ si Ipinle California lati fa aarun ati awọn abawọn ibimọ tabi ipalara ibisi miiran.

Package Awọn akoonu

Before beginning assembly, verify that all components are present and undamaged. Refer to the included assembly manual for a detailed list of parts and hardware. Typically, the package includes:

• Wood panels (top, bottom, side, back, shelves)
• Tempered glass doors
• Hardware pack (screws, pegs, cam locks, anti-toppling kit, push-to-open latches)
• Awọn ilana apejọ

Awọn ilana Apejọ

Assembly is required for this media cabinet. Please follow the step-by-step instructions provided in the separate assembly manual included with your product. Ensure you have adequate space and the necessary tools (typically a Phillips head screwdriver) before starting.

1. Yọ awọn ohun elo kuro: Carefully unpack all parts and lay them out on a soft, clean surface to prevent scratches. Identify each part using the labels in the assembly manual.
2. Apejọ fireemu: Connect the side panels to the top and bottom panels using the provided hardware (e.g., cam locks and dowels). Ensure all connections are secure.
3. Fi sori ẹrọ Awọn apoti: Insert the fixed middle shelf. The upper and lower shelves are adjustable. Install shelf support pegs into the desired holes, then place the adjustable shelves on top. There are three levels of adjustment for these shelves.
4. So Panel Pada: Secure the back panel to the frame. Ensure the cable management holes are correctly oriented.
5. Fi Awọn ilẹkun Gilasi sori ẹrọ: Attach the tempered glass doors using the provided hinges and push-to-open latches. Test the door mechanism to ensure smooth operation.
6. Ohun elo Anti-Toppling to ni aabo: Attach the anti-toppling device to the top rear of the cabinet and then securely fasten it to a wall stud using appropriate hardware (not always included, depending on wall type).

Nọmba 1: Product Dimensions and Internal Shelf Spacing.

Nọmba 2: Adjustable Shelf Mechanism.

Awọn ilana Iṣiṣẹ

Awọn selifu adijositabulu

The upper and lower shelves of the media cabinet are adjustable to three different height levels. To adjust a shelf:

1. Yọ gbogbo ohun èlò kúrò nínú àpótí náà.
2. Carefully lift the shelf to remove it from its current support pegs.
3. Relocate the shelf support pegs to the desired set of holes on the side panels. Ensure pegs are inserted evenly on both sides.
4. Place the shelf back onto the support pegs, ensuring it is level and stable.

Ilẹkun Awọn ilẹkun Gilasi

The cabinet features tempered glass doors with a push-to-open latch mechanism. To open a door, gently push on the door panel. The latch will release, allowing the door to swing open. To close, push the door firmly until the latch engages.

Nọmba 3: Push-to-Open Door Operation.

USB Management

The cabinet includes cable management holes on the back panel to help organize and conceal wires from your electronic devices. Route cables through these openings to maintain a tidy appearance and prevent tangles.

Nọmba 4: Cable Management Slots.

Itoju

• Fífọ Àwọn Igi: Mu awọn ori igi nu pẹlu asọ, damp Aṣọ. Yẹra fún lílo àwọn kẹ́míkà líle, àwọn ohun ìfọmọ́ tí ó máa ń pa ara, tàbí ọrinrin tó pọ̀ jù, èyí tó lè ba ìparí rẹ̀ jẹ́.
• Fífọ Àwọn Ilẹ̀kùn Gilasi: Use a standard glass cleaner and a soft, lint-free cloth to clean the tempered glass doors. Spray cleaner onto the cloth, not directly onto the glass, to prevent overspray onto wood components.
• Ṣiṣayẹwo ohun elo: Lokọọkan ṣayẹwo gbogbo awọn skru ati awọn fasteners lati rii daju pe wọn wa ni wiwọ. Retighten ti o ba wulo lati ṣetọju iduroṣinṣin.
• Yago fun Imọlẹ Oorun Taara: Fífi ara hàn sí oòrùn tààrà fún ìgbà pípẹ́ lè fa pípẹ́ tàbí yíyípo ti igi náà.

Laasigbotitusita

• Igbimo minisita ni Wobbly: Ensure the cabinet is placed on a level surface. Check that all assembly screws and cam locks are fully tightened. If an anti-toppling device is installed, ensure it is securely fastened to the wall.
• Awọn ilẹkun Ko Tii Dada: Check that the push-to-open latches are correctly installed and aligned. Ensure hinges are securely fastened and not bent. Adjust the position of the latches if needed.
• Àwọn selifu tí kìí ṣe ìpele: Verify that the shelf support pegs are inserted completely and evenly into the corresponding holes on both side panels.
• Awọn ẹya ti o padanu tabi Awọn ohun elo ti o bajẹ: If you find any missing parts or damaged components upon unpacking, do not proceed with assembly. Contact HOMCOM customer support or your retailer for assistance.

Awọn pato

Atilẹyin ọja ati Support

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. For technical support, missing parts, or any inquiries regarding your HOMCOM Media Cabinet, please contact HOMCOM customer service directly through their official webaaye tabi alaye olubasọrọ ti a pese ninu iwe rira rẹ.