1. Ifihan
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your AquaJoyer Pool Fountain. This dual spray waterfall sprinkler is designed to enhance your pool experience by providing adjustable water features and contributing to water cooling and circulation. It is compatible with both above-ground and in-ground pools.
Awọn ẹya pataki:
- Dual Spray Design: Delivers an exhilarating splash experience with increased water volume.
- Adjustable Waterfall: Customize spray direction and height for optimal enjoyment.
- Water Temperature Reduction: Helps lower pool water temperature by 10-20 degrees Fahrenheit.
- Ibamu Agbaye: Designed to fit most 1.5" in-ground pool return jets and 1.5" / 1.25" above-ground pool inlet/outlet fittings.
2. Alaye Aabo
- Always turn off the pool pump before installation or maintenance.
- This product is not a toy. Do not allow children to play with the product.
- Never grab, pull, push, lean on, or obstruct the sprayer at any time.
- Ensure all accessories are securely attached before operating the pool pump.
3. Package Awọn akoonu
Jọwọ rii daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- Pool Fountain Unit (with solar panel and LED lights)
- Riser Pipe
- Alakoso titẹ
- Threaded Adapter (for above-ground pools)
- Eyeball Seat Key Tool (for in-ground pools)
- Isakoṣo latọna jijin
- Itọsọna olumulo
Fidio: Unboxing ati siwaju siiview of the AquaJoyer Pool Fountain components.
4. Eto ati fifi sori
Before starting, ensure the pool pump is turned off.
4.1 For Above-Ground Pools:
- Unscrew the inlet nozzle from your pool's return jet.
- Attach the threaded adapter (Part D) to the pool return jet base.
- Attach the pressure regulator (Part B) to the threaded adapter (Part D).
- Attach the riser (Part C) to the pressure regulator (Part B). Use the rotate ring to tighten.
- Insert the two spray heads (Part E) into the riser (Part C) and tighten the side rings.
Image: Step-by-step diagram for installing the pool fountain on an above-ground pool.
4.2 For In-Ground Pools:
- Unscrew the eyeball ring (cover), the eyeball, and the eyeball seat from your pool's return jet. You can use the eyeball seat key tool (Part F) to unscrew the seat.
- Attach the pressure regulator (Part B) to the pool return jet base.
- Attach the riser (Part C) to the pressure regulator (Part B). Use the rotate ring to tighten.
- Insert the two spray heads (Part E) into the riser (Part C) and tighten the side rings.
Image: Step-by-step diagram for installing the pool fountain on an in-ground pool.
Akiyesi pataki: When installing the solar ambient light, ensure the solar panel faces upward and is level for optimal solar charging. Avoid any obstructions around it.
5. Awọn ilana Iṣiṣẹ
5.1 Adjusting Water Pressure:
The pressure regulator (Part B) allows you to control the water flow and thus the height of the fountain spray. Turn the regulator to adjust the opening:
- Fully Closed: High Pressure (smaller opening, higher waterfall)
- Partially Open: Ipa Alabọde
- Ṣii ni kikun: Low Pressure (larger opening, lower waterfall)
Image: Visual guide to adjusting water pressure using the regulator for different spray heights.
5.2 Adjusting Spray Direction:
The spray heads can be rotated 360 degrees to change the fountain direction and height. After rotating the riser and adjusting the spray angle, repeat steps to swap the left and right fountains, ensuring the solar panel faces upward.
Image: Illustrations showing various adjustable spray directions and heights.
6. Itọju
- Regularly inspect the spray heads for any debris or mineral buildup. Clean as needed to ensure optimal water flow.
- For winterization, remove the fountain from the pool, clean it thoroughly, and store it in a dry, protected area to prevent damage from freezing temperatures.
7. Laasigbotitusita
- Low or Uneven Spray:
- Check your pool pump's horsepower. A minimum of 0.2HP is recommended for optimal performance.
- Ensure the pressure regulator is not fully open, which would reduce pressure.
- Inspect spray heads for clogs and clean if necessary.
- Fountain Does Not Light Up (if applicable):
- Ensure the solar panel is clean and exposed to direct sunlight for sufficient charging.
- Verify the light is manually turned on or set to auto mode (if available).
8. Awọn pato
- Awọn iwọn ọja: 7.09 x 2.95 x 12.99 inches
- Ìwọ̀n Nkan: 1.41 iwon
- Olupese: AquaJoyer
- Nọmba Awoṣe Nkan: POOL-02-A-WH
- Orisun Agbara: Omi titẹ
9. Atilẹyin ọja ati Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AquaJoyer webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.
