tectake Arges Ergonomic Office Chair with Lumbar Support (Model 405323)

Ọrọ Iṣaaju

Thank you for choosing the tectake Arges Ergonomic Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

The tectake Arges office chair is designed to provide optimal seating comfort and support, helping to alleviate back issues during long periods of sitting. Its features include a height and angle-adjustable headrest, comfortable reclinable armrests, continuous height adjustment, breathable mesh fabric, and a height-adjustable lumbar support with adjustable tilt resistance.

Awọn Itọsọna Aabo

• Rii daju pe gbogbo awọn paati wa ati ti ko bajẹ ṣaaju apejọ. Ma ṣe lo ti eyikeyi awọn ẹya ba sonu tabi bajẹ.
• Pejọ alaga lori rirọ, dada mimọ lati ṣe idiwọ awọn ikọlu.
• Maṣe duro lori alaga.
• Má ṣe lo àga náà gẹ́gẹ́ bí àga ìgbésẹ̀.
• Keep children away from the chair during assembly. Small parts can be a choking hazard.
• The maximum load capacity for this chair is 120 kg (264 lbs). Do not exceed this weight limit.
• Regularly check all screws and connections to ensure they are tight. Retighten if necessary.
• Yẹra fún fífi àga náà sí oòrùn tàbí ooru líle fún ìgbà pípẹ́.

Eto ati Apejọ

Follow these steps to assemble your tectake Arges office chair. It is recommended to have two people for assembly.

1. Yọ awọn ohun elo kuro: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts are present against the included parts list (refer to your product packaging for the complete list).
2. So Casters si Ipilẹ: Insert the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
3. Fi Gas Gbe soke: Gbe silinda gbe gaasi sinu iho aarin ti ipilẹ alaga.
4. Kó ìjókòó àti ẹ̀yìn jọ: Attach the backrest to the seat using the provided screws and tools. Ensure the orientation is correct.
5. So Armrests: Secure the armrests to the seat and backrest assembly using the designated screws.
6. Mount Mechanism: Attach the control mechanism to the underside of the seat using the appropriate screws. Ensure the lever is facing the front or right side for easy access.
7. So Ijoko pọ si Gbe gaasi: Fi iṣọra gbe ijoko ti o pejọ sori silinda gbigbe gaasi, ni idaniloju pe o wa ni aarin ati iduroṣinṣin.
8. So Headrest: Slide the headrest into the designated slots at the top of the backrest and secure it.

After assembly, sit on the chair to ensure all components are securely connected and stable.

Awọn ilana Iṣiṣẹ ati Awọn atunṣe

Your tectake Arges office chair offers several adjustment options to customize your seating experience for optimal comfort and ergonomic support.

Alaga Iga tolesese

To adjust the seat height (approx. 45-55 cm):

• Lati dagba: Lift the lever located under the seat on the right side while taking your weight off the seat. The seat will rise automatically.
• Lati dinku: Lift the lever while seated. The seat will lower under your weight. Release the lever at the desired height.

Backrest Tilt Function

The chair features a tilt function with adjustable resistance.

• To activate/deactivate tilt: Pull out or push in the lever located under the seat (often the same lever as height adjustment, or a separate one).
• To adjust tilt resistance: Turn the round knob located under the front of the seat. Turn clockwise to increase resistance (making it harder to tilt) and counter-clockwise to decrease resistance (making it easier to tilt).

Atilẹyin Lumbar adijositabulu

The lumbar support is height-adjustable to provide targeted support for your lower back.

• Grasp the lumbar support pad on the backrest and slide it up or down to your preferred position.

Image: Close-up of the adjustable lumbar support mechanism on the chair's backrest.

Adijositabulu Headrest

The headrest can be adjusted in both height and angle.

• Atunse Giga: Gently pull the headrest up or push it down to adjust its height.
• Atunse igun: Tilt the headrest forward or backward to find the most comfortable angle for your neck and head.

Image: Close-up of the adjustable headrest, showing its height and angle adjustment capabilities.

Reclinable Armrests

The armrests can be tilted backward to allow the chair to be pushed closer to a desk or for easier movement.

• Simply lift the armrests upwards to recline them. Push them back down to their original position.

Itọju ati Itọju

Proper maintenance will extend the life of your tectake office chair.

• Ninu: Nu alaga nipa lilo ipolowoamp cloth. For stubborn stains, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners.
• Itọju Aṣọ: The breathable mesh fabric and padded seat can be gently wiped. Do not saturate with water.
• Itọju fireemu: Nu awọn ẹya irin ati ṣiṣu pẹlu ipolowoamp asọ.
• Itọju Caster: Periodically check casters for hair or debris and clean them to ensure smooth movement.
• Ṣayẹwo Fastener: Regularly inspect all screws and bolts to ensure they are tight. Retighten as needed to maintain stability and safety.
• Ibi ipamọ: Ti o ba tọju alaga fun akoko ti o gbooro sii, tọju rẹ ni ibi ti o tutu, ibi gbigbẹ kuro lati orun taara.

Laasigbotitusita

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact tectake customer support for assistance.

Awọn pato

Image: Detailed dimensions of the tectake Arges office chair.

Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the purchase documentation or contact tectake customer service directly. Contact details can typically be found on the manufacturer's webojula tabi risiti rira rẹ.

Olupese: tectake

Olutaja: tectake nederland

Ilana Pada: 30 ọjọ