1. Ọja Ipariview
The Mesqool Vibrating Alarm Clock (Model CR1027) is a portable device designed to assist with waking up through customizable alarm modes, including vibration, buzzer, or both. It features a rechargeable battery, dual alarm settings, and adjustable vibration intensity. This manual provides comprehensive instructions for its use.
Nọmba 1: Iwaju view of the Mesqool Vibrating Alarm Clock, displaying the digital time, AM/PM indicator, alarm icons, and battery status.
2. Package Awọn akoonu
Jọwọ rii daju pe gbogbo awọn ohun kan wa ninu apo rẹ:
- Mesqool Vibrating Alarm Clock (CR1027)
- Okun Ngba agbara USB
- Afowoyi Olumulo (iwe-ipamọ yii)
3. Device Ìfilélẹ
Familiarize yourself with the buttons and ports on your alarm clock for proper operation.
Nọmba 2: Apa view of the alarm clock, indicating the location of control buttons and the charging port. Specific button functions are detailed in the operating instructions.
4. Eto
4.1 Gbigba agbara akọkọ
Before using the alarm clock for the first time, ensure it is fully charged. Connect the provided USB charging cable to the clock's charging port and then to a compatible USB power adapter (not included). The battery indicator on the display will show the charging status.
Nọmba 3: The alarm clock connected to a charging cable, illustrating the charging process.
4.2 Agbara Tan / Pa
To power the device on or off, press and hold the Power button (located on the side, refer to Figure 2) for approximately 3 seconds.
5. Awọn ilana Iṣiṣẹ
5.1 Ṣiṣeto Aago naa
- Tẹ awọn Eto akoko button once. The hour digits will begin to flash.
- Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn wakati.
- Tẹ Eto akoko lẹ́ẹ̀kan sí i. Àwọn nọ́mbà ìṣẹ́jú náà yóò máa tàn yanranyanran.
- Lo awọn + ati - awọn bọtini lati ṣatunṣe awọn iṣẹju.
- Tẹ Eto akoko a third time to confirm the time and exit the setting mode.
5.2 Eto Awọn itaniji (Itaniji 1 ati Itaniji 2)
The alarm clock supports two independent alarms. The procedure for setting each alarm is identical.
- Tẹ awọn Itaniji 1 or Itaniji 2 button once. The alarm time will flash.
- Lo awọn + ati - awọn bọtini lati ṣeto wakati itaniji ti o fẹ.
- Tẹ awọn ti o baamu Itaniji button again. The alarm minutes will flash.
- Lo awọn + ati - awọn bọtini lati ṣeto awọn iṣẹju itaniji ti o fẹ.
- Tẹ awọn ti o baamu Itaniji button a third time to confirm the alarm time.
- Immediately after setting the time, press the Itaniji button repeatedly to cycle through the available alarm modes: Gbigbọn nikan, Buzzer Nikan, ati Vibration + Buzzer. The corresponding icon will appear on the display.
- To activate or deactivate an alarm, press the respective Itaniji button until the alarm icon appears (activated) or disappears (deactivated).
Nọmba 4: Display showing the three alarm modes: Vibration (VIB), Vibration + Buzzer (VIB+BUZZ), and Buzzer (BUZZ).
5.3 Iṣiṣẹ Snooze
When an alarm is active, press the large Didun/Imọlẹ button (typically on the top or front, refer to Figure 2) to temporarily silence the alarm for approximately 9 minutes. The alarm will reactivate after this period.
5.4 Dídá ìkìlọ̀ náà dúró
To stop an active alarm, press any button other than the Didun/Imọlẹ button. The alarm will then reset for the next scheduled activation.
5.5 Adjusting Vibration Intensity
The alarm clock offers three levels of vibration intensity: Low, Middle, and High.
- While the alarm is not active, press the Gbigbọn button (refer to Figure 2).
- Each press will cycle through the intensity levels. The display may indicate the current level.
Nọmba 5: Illustration of the three vibration intensity levels: Low, Middle, and High.
5.6 Ifihan Imọlẹ
Tẹ awọn Imọlẹ button (often combined with Snooze, refer to Figure 2) to cycle through different display brightness levels.
6. Itọju
- Clean the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Ma ṣe fi ẹrọ naa han si awọn iwọn otutu to gaju, imọlẹ orun taara, tabi ọrinrin pupọ.
- Ensure the charging port remains free of dust and debris to maintain proper connection.
- When storing the device for extended periods, keep it in a cool, dry environment.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Clock does not turn on. | Batiri ti dinku. | Connect the device to a power source using the USB cable and allow it to charge fully. |
| Alarm does not sound or vibrate. | Itaniji ko mu ṣiṣẹ tabi ṣeto ti ko tọ. | Verify that the alarm time is set correctly and the desired alarm mode (Vibration, Buzzer, or both) is selected and activated (alarm icon visible on display). |
| Ifihan ti wa ni baibai tabi unreadable. | Ipele imọlẹ ti ṣeto kere ju. | Tẹ awọn Imọlẹ button to increase the display brightness. |
| Awọn bọtini ko dahun. | Ibùgbé software glitch. | Try restarting the device by holding the Power button for 3 seconds. If the issue persists, allow the battery to fully deplete and then recharge. |
8. Awọn pato
- Awoṣe: CR1027
- Brand: Mesqool
- Iru ifihan: LED
- Orisun Agbara: Batiri Agbara (Agba agbara)
- Agbara Batiri: 3000mAh
- Awọn iwọn ọja: Approximately 3.35"W x 3.35"H x 1.06"D
- Ìwọ̀n Nkan: 7.4 iwon
- Awọn ẹya pataki: Adjustable Volume, Dual Alarms, Snooze Function, Vibration Alarm
9. Atilẹyin ọja ati Support
Mesqool products are manufactured to high standards. For warranty information, technical assistance, or customer support, please refer to the contact details provided on the product packaging or visit the official Mesqool webAaye ayelujara. Jọwọ pa iwe-ẹri rira rẹ mọ gẹgẹbi ẹri rira fun awọn ẹtọ atilẹyin ọja.
Nọmba 6: Product packaging, which typically includes manufacturer details and support contact information such as email (e.g., support-eu@mesqool.com) and website (e.g., http://www.mesqool.com).
