1. Ifihan
This user manual provides essential information for the safe and efficient operation of your Anern 4200W Hybrid Solar Inverter. This pure sine wave inverter is designed for off-grid solar systems, converting 24V DC power to 220-230VAC. It integrates an inverter, a 120A MPPT solar charger, and a battery charger, offering comprehensive power support. The inverter is compatible with 24V lithium, lead-acid, and gel batteries, and can also operate without a battery.
2. Awọn ilana aabo
Jọ̀wọ́ ka gbogbo ìlànà ààbò kí o sì lóye wọn kí o tó fi sori ẹrọ àti ṣiṣẹ́. Àìtẹ̀lé àwọn ìlànà wọ̀nyí lè yọrí sí ìkọlù iná mànàmáná, iná, tàbí ìpalára ńlá.
- Rí i dájú pé gbogbo wáyà ni àwọn òṣìṣẹ́ tó péye ń ṣe ní ìbámu pẹ̀lú àwọn ìlànà iná mànàmáná agbègbè.
- Maṣe gbiyanju lati ṣajọpọ tabi tun ẹrọ oluyipada naa funrararẹ. Tọkasi awọn oṣiṣẹ iṣẹ ti o peye.
- Pa inverter kuro ninu omi, ọrinrin, ati awọn ohun elo ti o le fa ina.
- Rii daju pe fentilesonu to dara ni ayika ẹrọ oluyipada lati ṣe idiwọ igbona.
- Akiyesi Pataki fun Awọn Olumulo AMẸRIKA: This solar hybrid inverter is designed for 220V/230V AC output and does not support 110V/120V AC output directly. It also does not support parallel operation or split-phase operation in some parts of the US. For 110V/120V home appliances, a separate step-down converter (not included) is required.
3. Ọja Ipariview
The Anern 4200W Hybrid Solar Inverter is a versatile device designed to manage solar power, battery charging, and AC output for off-grid applications. It features a pure sine wave output, ensuring compatibility with sensitive electronics.
olusin 3.1: Iwaju view of the Anern 4200W Hybrid Solar Inverter, showcasing its orange casing and central display.
Awọn ẹya pataki:
- Ijade Sine Wave Pure: Provides clean and stable power suitable for all types of loads, including sensitive electronics.
- Olùdarí Àkójọpọ̀ Àkójọpọ̀ MPPT: Built-in 120A MPPT solar charge controller maximizes solar power harvesting.
- Awọn ọna gbigba agbara lọpọlọpọ: Supports solar priority, utility priority, solar and utility only, and battery & solar charging modes.
- Awọn ọna Ijade lọpọlọpọ: Offers solar priority, utility priority, and SBU (Solar-Battery-Utility) output modes.
- Ibamu Batiri: Compatible with 24V Lithium, Lead-Acid, and Gel batteries.
- Battery-Less Operation: Capable of operating without a connected battery.
- Aabo ti o ni kikun: Includes overload, over-temperature, short-circuit, overcurrent, low-voltage, overcharge, backfill, and overheat protection.
- Itutu Ọlọgbọn: Features an intelligent variable speed fan for efficient heat dissipation and extended system life.
- Atunbẹrẹ aifọwọyi: A maa tun bẹrẹ laifọwọyi nigbati agbara AC ba ti pada.
- Abojuto Wi-Fi: Supports Wi-Fi module for remote monitoring via a mobile application.
Product Components and Display:
Figure 3.2: Detailed diagram of the inverter's components and display elements. Key parts include the LCD display, status indicators, function buttons, AC input/output, battery input, PV input, and communication ports.
- LCD àpapọ
- Ifihan ipo
- Atọka gbigba agbara
- Aṣiṣe ifihan
- Awọn bọtini iṣẹ
- Titan/pa a yipada
- AC igbewọle
- Ijade akọkọ
- Second edition (Secondary output)
- Iṣagbewọle batiri
- PV igbewọle
- Ohun elo egboogi-ekuru
- RS-232 communication connection / WiFi connection
Figure 3.3: The inverter features a primary AC output of 4200W and a secondary output of 1400W. The secondary output activates when mains current is absent and battery voltage is low, conserving energy.
Figure 3.4: The inverter incorporates multiple protection mechanisms including overcurrent, low-voltage, short-circuit, overheating, overload, overcharge, and backfill protection to ensure safe operation.
Figure 3.5: The inverter is compatible with GEL, FLD (Flooded), Li-on (Lithium-ion), and AGM battery types, offering flexibility for different energy storage solutions.
4. fifi sori
Proper installation is crucial for the performance and safety of your hybrid solar inverter. Always consult a qualified electrician for installation to ensure compliance with all local and national electrical codes.
Wiring Diagram and Recommendations:
Figure 4.1: This diagram illustrates a typical wiring setup for the hybrid solar inverter, including connections for photovoltaic (PV) modules, batteries, AC input (utility/generator), and AC output to household loads.
- Asopọ PV: O pọju. PV orun ìmọ Circuit voltage: 450Vdc. Max. PV array power: 6500W. Suggested wire: 10 AWG/6mm². It is recommended to connect solar modules in series.
- Asopọ batiri: For 48V lead-acid/lithium battery systems. Recommended wire size: 2 AWG Cable/25mm². Recommended Fuse: 150A.
- Iṣawọle AC: For 230VAC input. Maximum AC input voltage: 300VAC. Maximum AC charging current: 160A. Suggested cable: 10AWG/6mm². Recommended switch: 63A.
- Ijade AC: For 220V/230V output. Rated output current: 44.3Amp. Suggested cable: 10AWG/6mm². Recommended switch: 63A.
- Pataki: The inverter's output is 230V. For 110V/120V appliances, a separate converter (not included) is required to step down the voltage.
5. Isẹ
The inverter offers flexible operation modes to suit various energy needs. The LCD display and function buttons allow for easy configuration and monitoring.
Awọn ọna gbigba agbara:
The inverter supports four charging modes:
- Iyanju Oorun: Solar power is the primary source for charging batteries and powering loads. Utility power is used only when solar power is insufficient.
- Àkọ́kọ́ Ohun Èlò: Utility power is the primary source for charging batteries and powering loads. Solar power is used only when utility power is unavailable.
- Solar and Utility Only: Both solar and utility power are used to charge batteries and power loads.
- Battery & Solar: Prioritizes battery power, supplemented by solar.
Awọn ọna Ijade:
Inverter naa pese awọn ipo iṣelọpọ mẹta:
- Iyanju Oorun: Loads are primarily powered by solar energy.
- Àkọ́kọ́ Ohun Èlò: Loads are primarily powered by utility (grid) power.
- SBU Mode (Solar-Battery-Utility): Loads are powered first by solar, then by battery, and finally by utility power as a last resort.
Abojuto Wi-Fi:
The inverter can be monitored remotely using a Wi-Fi module (included) and a compatible mobile application. This allows users to view real-time data and adjust settings from their smartphone.
Fidio 5.1: Ipariview of the Anern Hybrid Solar Inverter with 120A MPPT Charge Controller, demonstrating its features and integration into a solar power system. This video highlights the inverter's capabilities and how it functions within a typical setup.
6. Itọju
Itọju deede ṣe idaniloju igbesi aye gigun ati iṣẹ ti o dara julọ ti oluyipada rẹ.
- Keep the inverter clean and free from dust. Use a dry cloth for cleaning.
- Rí i dájú pé afẹ́fẹ́ tó wà ní àyíká ẹ̀rọ náà tó. Má ṣe dí àwọn ihò afẹ́fẹ́.
- Lojoojumọ, ṣayẹwo gbogbo awọn asopọ fun wiwọ ati awọn ami ti ibajẹ.
- Monitor the LCD display for any error codes or warnings.
- The intelligent variable speed fan helps dissipate heat efficiently, contributing to the system's lifespan.
7. Laasigbotitusita
This section provides guidance for common issues. For complex problems, contact customer support.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Oluyipada ko titan | No DC input from battery/PV; On/Off switch off; Blown fuse. | Ṣayẹwo awọn asopọ batiri ati voltage; Ensure PV input is sufficient; Turn on the switch; Check and replace fuses if necessary. |
| Ko si AC jade | Overload protection activated; Short circuit; Low battery voltage; Over-temperature. | Reduce load; Check for short circuits; Charge battery; Ensure proper ventilation. The inverter has automatic restart when AC power is restored. |
| Awọn ọran gbigba agbara | Insufficient solar input; Battery fault; Incorrect charging mode settings. | Check PV array for shading or damage; Verify battery health; Adjust charging mode settings via LCD. |
| Overload/Over-temperature warning | Connected load exceeds inverter capacity; Poor ventilation. | Reduce connected load; Clear obstructions around the inverter; Ensure ambient temperature is within operating limits. |
8. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | 0855100d-00d4-4040-9ff1-56c64b625c86 |
| Ti won won Agbara | 4200W |
| DC Input Voltage | 24V |
| AC wu Voltage | 220-230VAC |
| Iwajade Waveform | Wave Sine Sure |
| MPPT Solar Charge Controller Current | 120A |
| O pọju. PV orun Open Circuit Voltage | 450Vdc |
| Max. PV Agbara Agbara | 6500W |
| Max PV No-Load Voltage | 500Vdc |
| Gbigba agbara PV ti o pọju lọwọlọwọ | 120Amp |
| Ti won won Jade Lọwọlọwọ | 44.3Amp |
| Package Mefa | 20.6 x 17.3 x 8.4 inches |
| Iwọn Nkan | 21.7 iwon |
| Olupese | Anern |
| Ilu isenbale | China |
9. Atilẹyin ọja ati Support
Anern is committed to providing high-quality products and excellent customer service.
- Atilẹyin ọja: Our inverters offer a one-year maintenance service. If there is a problem with the components of the inverter, we will replace them for you.
- Oluranlowo lati tun nkan se: For any issues or technical inquiries, please contact Anern's professional after-sales team. You may be asked to provide pictures or videos of the malfunction to help diagnose the problem.
- Awọn orisun Ayelujara: Ṣabẹwo si osise naa Anern Store on Amazon fun afikun ọja alaye ati support.
