virtavo Universal Adjustable Indoor/Outdoor Security Camera Mounting Bracket (Model XJH-Bracket) Instruction Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your virtavo Universal Adjustable Indoor/Outdoor Security Camera Mounting Bracket, Model XJH-Bracket. This bracket is designed to offer flexible positioning for your security cameras, ensuring optimal surveillance coverage.

The virtavo mounting bracket is compatible with various security cameras, including virtavo VistaFlask and SolarFlask models, as well as other cameras with standard mounting interfaces.

2. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn ohun kan wa ninu apo rẹ:

• 1x virtavo Universal Adjustable Mounting Bracket (Model XJH-Bracket)
• 1x Set of Mounting Screws and Wall Plugs

Note: Security camera is sold separately.

Image: Two virtavo universal adjustable mounting brackets, showing their design and adjustability.

3. Awọn ẹya Ọja

• Ibamu Agbaye: Designed to fit a wide range of security cameras, including virtavo VistaFlask and SolarFlask.
• Igun Atunse: Offers 360-degree rotation and 90-degree tilt for flexible camera positioning.
• Ikole ti o tọ: Made from rust-proof aluminum for indoor and outdoor use.
• Fifi sori Rọrun: Simple screw-in installation for secure mounting on walls or ceilings.

4. Alaye Aabo

• Ensure the mounting surface is strong enough to support the weight of the bracket and camera.
• Use appropriate tools for installation to prevent injury or damage.
• Keep small parts (screws, plugs) out of reach of children.
• If installing outdoors, ensure all connections are weather-sealed if required by your camera model.

5. Eto & Fifi sori

Follow these steps to properly install your virtavo mounting bracket:

1. Yan Ibi kan: Select a suitable wall or ceiling location that provides the desired camera view and is structurally sound.
2. Mark Drill Iho: Place the bracket base against the chosen surface and mark the positions for the drill holes.
3. Awọn iho iho: Use an appropriate drill bit to create pilot holes at the marked locations. Insert the provided wall plugs if necessary for your surface type.
4. Secure the Bracket Base: Align the bracket base with the drilled holes and secure it firmly using the provided screws.
5. Attach Camera to Bracket: Screw your security camera onto the threaded post of the mounting bracket. Ensure it is tightened securely.
6. Ṣatunṣe Igun: Loosen the adjustment wing nuts on the bracket to set the desired camera angle (up to 360-degree rotation and 90-degree tilt). Tighten the wing nuts firmly once the desired position is achieved.

6. Awọn ilana Iṣiṣẹ

Once installed, the virtavo mounting bracket allows for easy adjustment of your camera's field of view:

• Titunṣe Titẹ: Loosen the wing nut near the camera attachment point. Tilt the camera up or down to the desired angle. Tighten the wing nut to secure the position.
• Ṣíṣe àtúnṣe ìyípo: The ball joint allows for 360-degree rotation. Loosen the corresponding wing nut, rotate the camera horizontally, and then tighten to lock.

Always ensure all adjustment points are securely tightened after positioning to prevent the camera from shifting.

Image: A security camera mounted on a wall using the bracket, providing a wide view of a property with a pool.

Image: A security camera mounted outdoors with the bracket, demonstrating its weather-resistant application during rainfall.

7. Itọju

To ensure the longevity and optimal performance of your mounting bracket:

• Ninu igbagbogbo: Wipe the bracket with a soft, damp asọ lati yọ eruku ati idoti. Yago fun abrasive ose.
• Ṣayẹwo wiwọn: Periodically check all screws and adjustment points to ensure they remain tight and secure.
• Ṣayẹwo fun ibajẹ: Inspect the bracket for any signs of wear, corrosion, or damage, especially if installed outdoors. Replace if necessary.

8. Laasigbotitusita

If you encounter any issues with your mounting bracket, consider the following:

• Camera is Loose: Ensure the camera is fully screwed onto the bracket's threaded post and that all wing nuts are tightened.
• Bracket is Wobbly: Check that the base screws are securely fastened to the wall/ceiling. If installed on drywall, ensure wall plugs are properly seated.
• Igun Ṣíṣe Àtúnṣe Ìṣòro: Loosen the wing nuts sufficiently before attempting to adjust the angle. Do not force adjustments.

9. Awọn pato

10. Atilẹyin ọja & Atilẹyin

For warranty information or technical support, please refer to the official virtavo website or contact customer service directly. Keep your purchase receipt for warranty claims.

Ibi iwifunni:

• Olupese: virtavo
• Itaja Amazon: Visit the virtavo Store