1. Ifihan
O ṣeun fun riraasing the OREiN 2 Pack Motion Sensor Outdoor Lights. These advanced flood lights are designed to provide efficient and customizable outdoor illumination with intelligent motion sensing and dimmable dusk-to-dawn functionality. Featuring 450° superwide adjustment and durable IP65 waterproof construction, these lights are ideal for enhancing security and visibility around your home, garden, garage, or backyard.
Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.
2. Alaye Aabo pataki
- IKILO: Ewu ti ina-mọnamọna. Ge asopọ agbara ni fiusi tabi fifọ Circuit ṣaaju fifi sori ẹrọ tabi iṣẹ.
- Ọja yii gbọdọ wa ni fifi sori ẹrọ ni ibamu pẹlu koodu fifi sori ẹrọ ti o wulo nipasẹ eniyan ti o faramọ ikole ati iṣẹ ti ọja ati awọn eewu ti o kan.
- Use only UL/ETL listed wire connectors.
- Má ṣe fi ohun èlò yìí sí orí àwọn ibi tí ó rọrùn láti jóná.
- Rii daju pe gbogbo awọn asopọ wa ni aabo ati idabobo daradara.
- Do not look directly into the LED light source when the light is on.
- Jeki awọn ohun elo apoti kuro lọdọ awọn ọmọde.
- This product is designed for outdoor use only and is hardwired. Do not attempt to modify it for battery or plug-in use.
3. Package Awọn akoonu
Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- OREiN Motion Sensor Outdoor Lights (2 units)
- Iṣagbesori Hardware
- Wiring Components (wire nuts)
- LED Light Panels (integrated)
- Ilana itọnisọna
Image: Two OREiN motion sensor outdoor lights, showing the dual heads and central motion sensor. These are the primary units included in the package.
4. Ọja Ipariview
The OREiN Motion Sensor Outdoor Light features a robust design with highly adjustable components to provide optimal lighting coverage.
- Àwọn Orí Ìmọ́lẹ̀ Tí A Lè Ṣètò: Each light arm has 3 flexible joints, allowing for 450° width adjustment. This enables precise aiming of the light to cover specific areas or avoid light pollution.
- Sensọ išipopada: A 180° infrared PIR sensor detects motion up to 40 feet away, covering an area of approximately 1250 sq ft.
- Awọn Iyanju LED: Equipped with 5000K high-quality LED beads and professional filter lenses, providing bright and efficient illumination.
- Ikole ti o tọ: Made from PC material with IP65 waterproof certification, ensuring resistance to high temperatures, frost, UV, and shattering for long-lasting outdoor use.
Image: This diagram illustrates the six adjustable joints on the light arms, allowing for extensive rotation and aiming of the light heads and the central motion sensor.
Aworan: Ohun exploded view highlighting the internal components and adjustable features of the OREiN dual-head light, including the sensor and LED elements.
5. Itọsọna fifi sori ẹrọ
This outdoor motion light is AC hardwired and requires electrical connection to a standard junction box. A junction box is not included.
5.1 Akojọ aṣyn fifi sori ẹrọ tẹlẹ
- Rí i dájú pé a ti ge agbara kuro ni fifọ Circuit ṣaaju ki o to bẹrẹ.
- Confirm you have a standard junction box (five 1/2 inch 16 cubic inches capacity recommended).
- Gather necessary tools: screwdriver, wire strippers, wire nuts (included), electrical tape.
5.2 iṣagbesori Igbesẹ
- Fix the bracket: Attach the mounting bracket securely to your standard junction box using the provided screws. Ensure it is firmly in place.
- So awọn onirin: Carefully connect the wires from the light fixture to the corresponding wires in the junction box. Match colors: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use the included wire nuts to secure connections.
- Mu awọn asopọ pọ si: Ensure all wire connections are tight and properly insulated with wire nuts.
- Fix the light: Align the light fixture with the mounting bracket and secure it with the provided screws. Ensure the fixture is flush against the mounting surface.
Image: A visual step-by-step guide demonstrating the hardwired installation process, from mounting the bracket to securing the light fixture.
Image: The light fixture installed under a soffit, illustrating its flexibility for various mounting angles without restricting the sensor's functionality.
6. Awọn ilana Iṣiṣẹ
The OREiN motion sensor outdoor lights offer three distinct working modes, controlled by the settings on the motion sensor unit.
6.1 Awọn ipo Ṣiṣẹ
- Ipo afọwọṣe: The light is controlled by a manual wall switch. Turn the switch on to activate the light at 100% brightness, and off to turn it off. This mode bypasses the motion sensor and dusk-to-dawn features.
- Safety Mode (Motion Activated at Night): In this mode, the light will only activate at night when motion is detected. It will turn on to 100% brightness and remain on for the set duration (TIME setting) after motion ceases.
- Dusk to Dawn Dimmable Mode: The light automatically turns on at 30% brightness when it gets dark. When motion is detected, it brightens to 100% for the set duration (TIME setting), then returns to 30% brightness.
Image: This graphic demonstrates the dimmable dusk-to-dawn functionality, showing the light at 30% brightness in standby and increasing to 100% upon motion detection.
Image: Visual representation of the three operating modes: motion-activated 100% brightness, motion-activated 30% brightness (dusk-to-dawn), and manual switch control.
6.2 sensọ Awọn atunṣe
The motion sensor has three adjustable dials to customize its behavior:
- Àkókò: Adjusts the duration the light stays on after motion is detected and ceases. Settings typically range from a few seconds to several minutes (e.g., 10s, 40s, 8min).
- SENS (Ifaramọ): Controls the detection range of the motion sensor. Higher sensitivity means a wider detection area (e.g., up to 40ft).
- LUX (Ẹ̀rọ ìmọ́lẹ̀ ojúmọ́): Determines the ambient light level at which the motion sensor becomes active.
- Set to the "moon" end for minimal setting (light activates only in very dark conditions).
- Set to the "sun" end for maximum setting (light activates in brighter conditions, including daytime for testing).
For normal nighttime operation, ensure the LUX sensor is set towards the "moon" end to prevent the light from activating during the day.
Image: This image displays the adjustable dials for TIME, SENS, and LUX settings on the motion sensor, along with an illustration of the 180° detection angle and 40ft sensing distance.
7. Itọju
Regular maintenance ensures optimal performance and longevity of your OREiN outdoor lights.
- Ninu: Lẹ́ẹ̀kọ̀ọ̀kan, nu ohun èlò ìmọ́lẹ̀ àti lẹ́ńsì sensọ pẹ̀lú ìrọ̀rùn, damp aṣọ láti mú ẹrẹ̀, eruku, tàbí ìdọ̀tí kúrò. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
- Ayewo: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the light heads and sensor are still securely positioned.
- Awọn LED: A ti so orisun ina LED pọ mọ ara wọn, kii ṣe ohun ti olumulo le rọpo.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | No power; loose wiring; LUX setting too high (daytime); faulty sensor. | Check circuit breaker/fuse. Ensure all wire connections are secure. Adjust LUX setting to "moon" for nighttime operation. Test sensor by waving hand in front. |
| Imọlẹ duro nigbagbogbo. | Continuous motion detected; TIME setting too long; LUX setting too low (always dark). | Ensure no constant motion in detection area. Adjust TIME setting to a shorter duration. Adjust LUX setting to prevent activation in bright conditions. |
| Ina seju tabi flickers. | Ipese agbara ti ko duro ṣinṣin; awọn okun waya ti ko ni agbara; idamu. | Check power source stability. Re-check all wire connections. Ensure no strong electromagnetic interference nearby. |
| Sensọ išipopada ko ṣe iwari. | Obstruction; SENS setting too low; sensor dirty; incorrect angle. | Clear any obstructions. Increase SENS setting. Clean sensor lens. Adjust sensor angle for optimal coverage. |
9. Awọn alaye ọja
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | OREiN |
| Orukọ awoṣe | OL3600140 |
| Àwọ̀ | Dudu |
| Ohun elo | Acrylonitrile Butadiene Styrene (PC) |
| Fọọmu Imuduro Imọlẹ | Ikun omi |
| Ọja Mefa | 15.16"L x 5.83"W x 5.51"H |
| inu ile / ita gbangba Lilo | Ita gbangba |
| Orisun agbara | Hardwired AC (220 Volts) |
| Iru fifi sori ẹrọ | Oke Oke |
| Pataki Awọn ẹya ara ẹrọ | 133LM/W high efficiency, 180°/40FT Motion Sensor, 3 modes (dusk to dawn), 450° Adjustable Flood Lights, IP65 Waterproof |
| Imọlẹ Orisun Orisun | LED |
| Awọ Imọlẹ | Alawọ funfun (5000K) |
| Nọmba Awọn orisun Imọlẹ | 2 (fun ẹyọkan) |
| Wattage | 12 watts (per unit) |
| Imọlẹ | 1600 LM (equivalent to 150W) |
| Yipada Iru | Sensọ išipopada |
| Omi Resistance Ipele | IP65 mabomire |
| Iwọn Nkan | 3.31 iwon |
| Awọn iwe-ẹri | CE, FCC, RoHS |
10. Atilẹyin ọja ati Support
10.1 atilẹyin ọja Alaye
This OREiN product comes with a 2-odun olupese ká atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede.
The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or natural disasters.
10.2 Onibara Support
For any questions, technical assistance, or warranty claims, please contact OREiN customer support:
- Contact via Amazon: You can contact us directly through the Amazon platform where you purchased the product.
- Lori ayelujara: Wa fun "OREiN" online to find our official webojula ati alaye olubasọrọ.
- Atilẹyin foonu: For 24-hour service, you may call 1(844)506-1530.
We recommend contacting support before initiating any returns, as many issues can be resolved quickly with assistance.
Image: OREiN customer service contact information, including a phone number for 24-hour support.
