Ọrọ Iṣaaju
This manual provides essential instructions for the installation, operation, and maintenance of your NETGEAR MS308 8-Port 2.5GB Multi-Gigabit Unmanaged Ethernet Switch. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance. The MS308 is designed to expand your network capacity with high-speed 2.5 Gigabit Ethernet connections, offering a simple plug-and-play solution for homes and small offices.
Package Awọn akoonu
Jẹrisi pe package rẹ ni awọn nkan wọnyi ninu:
- NETGEAR Unmanaged Switch MS308
- Adapter agbara
- Ohun elo fifi sori odi
- Awọn ẹsẹ roba
- Itọsọna fifi sori ẹrọ (iwe yii)
Awọn ilana iṣeto
The NETGEAR MS308 switch is designed for simple plug-and-play operation, requiring no software installation or configuration. Follow these steps to set up your switch:
- Ibi: Choose a suitable location for the switch. It can be placed on a desktop or mounted on a wall using the included wall installation kit. Ensure adequate ventilation around the device.
- So agbara: Connect the power adapter to the switch's power input and then plug the adapter into a power outlet. The Power LED on the front of the switch will illuminate.
- Awọn ẹrọ Sopọ: Use standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds) to connect your network devices (e.g., computers, servers, network-attached storage (NAS), Wi-Fi access points) to any of the 8 Ethernet ports on the switch.
- Jẹrisi Asopọmọra: Once connected, the corresponding LED for each active port will light up, indicating a successful connection. The color of the LED indicates the link speed (refer to the Operating section for details).


Ṣiṣẹ Yipada
The NETGEAR MS308 is an unmanaged switch, meaning it operates automatically without requiring user configuration. Simply connect your devices, and the switch will handle data traffic efficiently.
LED Ifi
The front panel of the switch features LED indicators that provide status information:
- LED agbara:
- Solid Green: The switch is powered on.
- Link/Activity LEDs (for each port):
- Solid Green (Both): 2.5 Gigabit connection.
- Solid Green (Left): 1 Gigabit connection.
- Solid Green (Right): 100 Megabit connection.
- Blinking: Activity on the port (data transmission).
- Off: No link or device connected.


Itoju
The NETGEAR MS308 switch is designed for reliable, long-term operation with minimal maintenance. Consider the following for optimal performance:
- Ninu: Keep the device clean and free from dust. Use a soft, dry cloth to wipe the exterior. Avoid using liquid cleaners or aerosols.
- Afẹfẹ: Rii daju pe awọn šiši fentilesonu ko ni idinamọ lati ṣe idiwọ igbona.
- Firmware: As an unmanaged switch, the MS308 typically does not require firmware updates. However, for other NETGEAR products, always check the official NETGEAR support website for the latest firmware and updates.
Laasigbotitusita
If you encounter issues with your NETGEAR MS308 switch, refer to the following common troubleshooting steps:
- Ko si Agbara:
- Rii daju pe ohun ti nmu badọgba agbara ti sopọ ni aabo si iyipada ati iṣan agbara ṣiṣẹ.
- Rii daju pe iṣan agbara n ṣiṣẹ nipa pilogi sinu ẹrọ miiran.
- Ko si Imọlẹ Ọna asopọ:
- Ṣayẹwo pe okun Ethernet ti sopọ ni aabo si ibudo iyipada ati ẹrọ nẹtiwọọki mejeeji.
- Gbiyanju okun Ethernet ti o yatọ.
- Rii daju pe ẹrọ ti a ti sopọ ti wa ni titan ati pe ohun ti nmu badọgba nẹtiwọọki rẹ n ṣiṣẹ ni deede.
- Gbiyanju lati so ẹrọ pọ si ibudo ti o yatọ lori iyipada.
- Iyara Nẹtiwọọki o lọra:
- Verify that your Ethernet cables are rated for the desired speed (Cat5e or higher for 2.5G).
- Check the Link/Activity LED color to confirm the negotiated speed (Both Green for 2.5G, Left Green for 1G, Right Green for 100M).
- Ensure your connected devices (e.g., network adapter, router) also support 2.5G speeds.
- Temporarily disconnect other devices to see if network congestion is the cause.
Imọ ni pato
| Brand | NETGEAR |
| Nọmba awoṣe | MS308 |
| Nọmba ti Ports | 8 |
| Ni wiwo Iru | RJ45 |
| Data Gbigbe Oṣuwọn | 2.5 Gbps (Multi-Gigabit) |
| Voltage | 12 Volts (DC) |
| Ti isiyi Rating | 1.5 Amps |
| Ohun elo ọran | Ṣiṣu |
| Oke otutu Rating | Awọn iwọn Celsius 50 |
| Iwọn Nkan | 1.63 iwon |
| Package Mefa | 8.11 x 7.36 x 3.43 inches |
| Lilo Agbara | IEEE802.3az ibamu |
Atilẹyin ọja ati Support
The NETGEAR MS308 switch comes with an industry-leading 3-odun lopin atilẹyin ọja hardware. For detailed warranty information, technical support, and additional resources, please visit the official NETGEAR support webojula.
Fun iranlọwọ siwaju sii, o le ṣabẹwo si NETGEAR itaja lori Amazon.





