1. Ifihan
This manual provides detailed instructions for the proper use and maintenance of your AstrHori XH-2 Camera Light Meter. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.
The AstrHori XH-2 is a compact and accurate light meter designed for photographers, particularly those using cameras without built-in metering or seeking enhanced precision. It features an upgraded metering module for accurate light readings and a cold shoe mount for compatibility with various camera types.
2. Ọja Ipariview
2.1 irinše
- AstrHori XH-2 Light Meter
- USB-C Ngba agbara Cable
- Ilana Afowoyi (iwe yii)
2.2 Device Awọn ẹya ara ẹrọ
- Upgraded Metering Module: Provides enhanced accuracy for light measurement.
- Wide Shutter Speed Range: Supports 40 stops for precise exposure control.
- Isakoso Agbara Aifọwọyi: Automatically turns off after approximately 3 hours of inactivity. Enters low-power dormant mode after 25 seconds of no operation.
- Oke Bata Tutu: Compatible with various camera models, including older Leicas, rangefinder cameras, and SLRs. Can also be used handheld.
- Ifihan OLED 0.66": Ko o ati ki o rọrun-lati-ka iboju.
- 30° Average Metering: Single metering time is approximately 0.5 seconds.
- Convex Lens Design: Enhances light gathering, with a stepped light inlet to prevent reflection.
- Ngba agbara USB-C: Ibudo Iru-C gbogbo agbaye fun gbigba agbara irọrun.
2.3 Ifilelẹ ẹrọ
The device features a 0.66" OLED display on the front, an adjustment dial for settings, and a cold shoe mount on the bottom for attachment to cameras. A USB-C port is located on the bottom for charging.
3. Eto
3.1 Ngba agbara si Ẹrọ
- Locate the USB-C charging port on the bottom of the light meter.
- Connect the provided USB-C cable to the light meter and a compatible USB power source (e.g., computer, wall adapter).
- A full charge takes approximately 30 minutes. The power display on the OLED screen will indicate charging status.
Ẹrọ naa ni batiri litiumu 80 mAh ti a ṣe sinu.
3.2 Mounting on a Camera
- Identify the cold shoe mount on your camera.
- Slide the AstrHori XH-2's cold shoe base into your camera's cold shoe.
- Ensure the light meter is securely seated. The design allows for a snug fit without electrical contact, making it suitable for various camera types.
The light meter can also be used handheld if preferred.
4. Awọn ilana Iṣiṣẹ
4.1 Power On/Off and Activation
- To activate the light meter from dormant mode, click the metering button.
- The device will automatically enter a low-power dormant mode if there is no operation within 25 seconds.
- The device will automatically turn off after approximately 3 hours of continuous dormancy.
4.2 Basic Metering
The XH-2 uses 30° average metering. A single metering takes approximately 0.5 seconds.
4.3 Siṣàtúnṣe iwọn
Use the adjustment dial to change settings. The OLED screen displays the current parameters.
- Ibiti ISO: ISO 5 - ISO 6400
- Ibi Iho: F1 - F32
- Ibiti Iyara Iyara: 1/8000s - 32s
4.4 Aṣayan ipo
Press the button to select different modes and settings:
- EV/EC (Exposure Value Compensation): Double-click the button and press for approximately 3.5 seconds the second time to enter EC setting.
- ISO: Double-click the button and press for approximately 0.5 seconds the second time to enter ISO setting.
- A/T (Aperture Priority/Shutter Priority): Double-click to switch between Aperture Priority (A mode) and Shutter Priority (T mode).
To lock the settings when real-time metering is active, press the button once. Long press the button for 0.5 seconds to perform a specific action (context-dependent, usually power-related or menu access).
4.5 Screen Display Information
The screen provides real-time feedback on exposure settings, battery level, and selected modes.
5. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Nọmba awoṣe | AstrHori XH-2 |
| Ohun elo | Copper (likely referring to internal components or casing material) |
| Oke Iru | Bata Tutu |
| Iwọn | Nǹkan bí 63g (2.22 ounces) |
| Awọn iwọn | 43 x 27 x 23 mm (1.69 x 1.06 x 0.91 inches) |
| Batiri | Built-in 80 mAh Lithium-Ion battery |
| Iboju ifihan | OLED 0.66" |
| Metering Angle | 30° Average Metering |
| Orisi Mita | Real-time metering (A/T modes) |
| Gbigba agbara Port | Iru-C |
| ISO Ibiti | ISO 5 - ISO 6400 |
| Iho Range | F1 - F32 |
| Shutter Speed Range | 1/8000s - 32s |
6. Itọju
- Ninu: Use a soft, dry cloth to clean the exterior of the light meter. Avoid using harsh chemicals or abrasive materials.
- Itọju lẹnsi: Keep the metering lens clean and free of dust or smudges to ensure accurate readings. Use a lens cleaning cloth if necessary.
- Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju nigbati ko si ni lilo.
- Itọju Batiri: Charge the battery regularly, even if the device is not used frequently, to maintain battery health. Avoid fully discharging the battery for extended periods.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹrọ ko tan. | Batiri kekere tabi dinku. | Gba agbara si ẹrọ naa nipa lilo okun USB-C ti a pese. |
| Inaccurate metering readings. | Metering lens is dirty or obstructed. Incorrect settings (ISO, aperture, shutter speed). | Clean the metering lens. Verify that ISO, aperture, and shutter speed settings match your camera and desired exposure. Ensure the metering angle is appropriate for the scene. |
| Device enters dormant mode too quickly. | Normal operation (25 seconds inactivity). | Click the metering button to reactivate the device. This is a power-saving feature. |
| Difficulty changing settings. | Incorrect button press sequence or timing. | Refer to Section 4.4 "Mode Selection" for correct button press sequences for EV/EC, ISO, and A/T mode changes. |
8. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official AstrHori webaaye tabi kan si olupin agbegbe rẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.
You can visit the AstrHori Store for more information: AstrHori Store
