1. Ifihan
Thank you for choosing the BOTSLAB G980H 4K Dash Cam with Hardwire Kit. This manual provides detailed instructions for the installation, operation, and maintenance of your new dash camera system. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
2. Ọja Ipariview
The BOTSLAB G980H is a high-performance dash camera system designed to capture clear video footage of your journeys. The front camera records in true 4K resolution, while the rear camera records in 1080P (optimized to approximately 2K via BOTSLAB algorithm). Both cameras utilize the Sony IMX 415 sensor, providing clear video capture, including in low-light conditions. The system includes advanced features such as 24/7 parking mode, ADAS (Advanced Driver-Assistance Systems), and built-in GPS for reliable recording and enhanced driving safety.

Image: The main components of the BOTSLAB G980H Dash Cam system, including the front camera, rear camera, and hardwire kit.
3. Ohun ti o wa ninu Apoti
Nígbà tí o bá ti yọ àpótí kúrò, jọ̀wọ́ rí i dájú pé gbogbo àwọn nǹkan wọ̀nyí wà nínú rẹ̀:
- BOTSLAB G980H Dash Cam (Front Unit)
- Kamẹra ẹhin
- Ohun elo Hardwire
- ADAS (Advanced Driver-Assistance Systems) functionality
- Micro USB cable (integrated with hardwire kit)
- Itọsọna olumulo

Image: A visual representation of the items included in the product packaging.
4. Eto ati fifi sori
Proper installation is crucial for optimal performance. The G980H dash cam is designed for windshield mounting.
4.1 Hardwire Kit Installation
The included hardwire kit enables 24/7 parking mode functionality. It requires connection to your vehicle's fuse box.
- Step 1: Test Power Sources
Use a multimeter to check for a 12V constant power source and an ACC (Accessory) power source in your car's fuse box. - Step 2: Set Up the Wires
Connect the Yellow Wire (ACC) to the accessory power, the Red Wire (VCC+) to the constant power, and the Black Wire (GND-) to a grounding point on the vehicle chassis. - Step 3: Connect the Dash Cam
Attach the micro USB port of the hardwire kit to your BOTSLAB G980H dash cam. Ensure the cable is routed neatly and securely.

Image: A multimeter being used to test fuse box connections for constant and ACC power.

Aworan: Isunmọ view of the hardwire kit's yellow, red, and black wires connected to the car's fuse box and ground.

Image: The micro USB connector of the hardwire kit ready to be plugged into the dash cam.

Image: A diagram showing the micro USB port, power conversion box, and the three wires (ACC, VCC+, GND-) of the hardwire kit.

Image: The 9ft long hardwire cable, designed for compatibility with various car models.
4.2 Dash Cam Mounting
Mount the front dash cam on your windshield, ideally behind the rearview dígí, láti rí i dájú pé kò dí ọ lọ́wọ́ view. Position the rear camera on the rear window for optimal coverage.
4.3 Fi kaadi iranti sii
Insert a high-quality U3 or V30 rated microSD card (not included) into the designated slot on the dash cam. Ensure it is inserted correctly until it clicks into place. The dash cam requires a memory card for recording footage.
5. Awọn ilana Iṣiṣẹ
5.1 Ipilẹ isẹ
- Titan/Apapa: The dash cam will automatically power on and begin recording when your vehicle starts, and power off when the engine is turned off (if connected via ACC power).
- Gbigbasilẹ Loop: The G980H features seamless loop recording, continuously overwriting the oldest footage nigbati kaadi iranti ti kun.
- G-Sensọ: In the event of a sudden impact or collision, the built-in G-Sensor will automatically lock the current video segment to prevent it from being overwritten.
- Didara fidio: The front camera records in 4K resolution, providing a wide 170-degree view ti opopona wa niwaju.

Image: Illustration of the dash cam's 4K resolution and 170-degree wide-angle recording capability.
5.2 ADAS Features (Advanced Driver-Assistance Systems)
The G980H is equipped with a 1.5TOPS AI NPU chip and BOTSLAB's AI algorithm to provide real-time driving alerts:
- Ìkìlọ̀ fún Ìkọlù Ẹlẹ́sẹ̀: Alerts you to potential collisions with pedestrians.
- Front Vehicle Starts Moving: Notifies you when the vehicle ahead begins to move, useful in traffic.
- Ikilọ Ilọkuro Lane: Alerts if you unintentionally drift out of your lane.
- Headway Monitoring Warning: Helps maintain a safe distance from the vehicle in front.
- Driver Fatigue Alerts: Provides alerts every 2 hours to encourage breaks and prevent fatigue.

Image: Visual representation of the various ADAS warnings provided by the dash cam, along with illustrations of the AI NPU chip and built-in GPS.
5.3 24/7 Parking Mode
With the hardwire kit installed, the G980H can monitor your vehicle even when it's turned off, providing protection against theft and vandalism.
- The dash cam will automatically switch to parking mode when the vehicle is parked.
- It will record emergencies and suspicious activities around your car.

Image: The dash cam display showing options for Time-Lapse Recording (Parking Mode) and Normal Recording (Driving Mode), illustrating its 24-hour monitoring capability.
5.4 GPS Integration
The built-in GPS module integrates with Google Maps, allowing you to track your driving path. The dash cam's display will show your real-time speed, and recorded videos will include speed records.

Image: The dash cam screen showing real-time speed and GPS data, with a map overlay indicating the driving path.
6. Itọju
- Ninu: Lo aṣọ rírọrùn tí ó gbẹ láti nu lẹ́ńsì kámẹ́rà àti ìbòjú. Yẹra fún lílo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọ́mọ́ra.
- Kaadi Iranti: Regularly format the memory card (at least once a month) to ensure optimal performance and prevent data corruption. Use a high-quality U3 or V30 rated microSD card.
- Awọn imudojuiwọn famuwia: Check the BOTSLAB official website periodically for firmware updates to ensure your dash cam has the latest features and bug fixes.
7. Laasigbotitusita
| Isoro | Owun to le Fa / Solusan |
|---|---|
| Kamẹra Dash ko ni agbara lori. |
|
| Didara fidio ko dara tabi blur. |
|
| Ipo gbigbe ko ṣiṣẹ. |
|
| Ifihan GPS ko lagbara tabi ko ri. |
|
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | G980H |
| Brand | BOTSLAB |
| Ipinnu Kamẹra iwaju | True 4K (Sony IMX 415 sensor) |
| Ipinnu Kamẹra ti o kẹhin | 1080P (optimized to near 2K) |
| Pataki Awọn ẹya ara ẹrọ | Hardwire Kit, ADAS, 24/7 Parking Mode, Built-in GPS, Loop Recording, G-Sensor |
| Asopọmọra Technology | USB, Alailowaya (fun awọn ẹya ifihan) |
| Iṣagbesori Iru | Afẹfẹ afẹfẹ |
| Àwọ̀ | Dudu |
| AI Chip | 1.5TOPS AI NPU chip |
9. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the official BOTSLAB webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.
Olupese: BOTSLAB
Ọjọ Akọkọ Wa: Oṣu Kẹwa Ọjọ 25, Ọdun 2024





