1. Ifihan
This manual provides comprehensive instructions for the safe and effective use of your Jimmy BX7 Pro Max Graphene Mattress Vacuum Cleaner. This corded handheld vacuum is designed for deep cleaning mattresses, sofas, and other fabric surfaces, featuring advanced technologies such as graphene heating, UV-C sterilization, and a smart dust sensor.
Jọwọ ka iwe afọwọkọ yii daradara ṣaaju ṣiṣiṣẹ ẹrọ naa ki o da duro fun itọkasi ọjọ iwaju.
2. Awọn irinše to wa
- Jimmy BX7 Pro Max Mattress Vacuum Cleaner Unit
- HEPA Filter (one pre-installed, additional may be included)
- Okun agbara (so)
- Cleaning Brush with Blade (for maintenance)
3. Eto
3.1. Unboxing ati Ibẹrẹ Ayẹwo
Carefully remove all components from the packaging. Inspect the vacuum cleaner and accessories for any signs of damage. If any damage is found, do not use the device and contact customer support.
3.2. Filter fifi sori
Ensure the HEPA filter is correctly installed in the dust cup. The filter is typically pre-installed. Refer to the 'Maintenance' section for instructions on how to access and reinstall the filter.
3.3. Asopọ agbara
Plug the power cord into a standard electrical outlet. The device is corded and requires continuous power during operation.
4. Awọn ilana Iṣiṣẹ
4.1. Agbara lori / Paa
Press and hold the power button for 2 seconds to start the vacuum cleaner. Press the power button again to turn it off.
4.2. Àwọn Ọ̀nà Ìmọ́tótó àti Àwọn Ẹ̀yà Ara Rẹ̀
- Imọ-ẹrọ Alapapo Graphene: The vacuum heats up to 149°F (65°C) in approximately 5 seconds. This heat penetrates deep into the fabric to aid in dust removal and dehumidification.
- UV-C Sterilization: UV ti a ṣepọ lamp emits 254nm UV light for deep sterilization of surfaces. The UV lamp activates automatically when the vacuum is in contact with a surface and turns off when lifted.
- High-Frequency Tapping: The device utilizes high-frequency tapping to dislodge dust and debris embedded deep within fabrics, enhancing cleaning effectiveness.
- Smart Dust Sensor: A built-in intelligent dust sensor identifies dust levels on fabrics and displays the cleaning status via an LED indicator. A red light indicates a dirty area, while a blue light indicates a clean area.
4.3. Usage on Different Surfaces
The Jimmy BX7 Pro Max is professional for beds, couches, pillows, cribs, and other flat fabric surfaces. It is not suitable for long velvet, long fluff carpets, or hard floors.
4.4. Fídíò Ìkọ́ni
5. Itọju
5.1. Cleaning the Dust Cup and Filter
To maintain optimal performance, clean the dust cup and HEPA filter after each use. Hold the dust cup with one hand and open the dust cup cover buckle with the other hand. Take out the filter and filter sponge, and clean them with water. Ensure they are completely dry before reassembling.
5.2. Nu ìyẹ̀fun fẹlẹ mọ́
Periodically check the brush roll for entangled hair or debris. Use the provided cleaning brush with a blade to cut and remove any wrapped hair. The brush roll is easily accessible for cleaning.
6. Laasigbotitusita
If you encounter any issues with your Jimmy BX7 Pro Max, refer to the following common problems and solutions:
6.1. Brush Roller Not Working
If the brush roller is not functioning, ensure it is free from obstructions like tangled hair or fabric. Check if it is correctly installed. Refer to the video below for detailed instructions.
6.2. Power Cord Loose
If the power cord feels loose or is not providing consistent power, ensure it is securely plugged into both the device and the wall outlet. Avoid pulling the cord forcefully. Refer to the video below for detailed instructions.
6.3. Weak Suction, Abnormal Noise, Overheating, or Auto Shut-off
These issues can often be resolved by checking the dust cup and filter for clogs, ensuring the brush roll is clear, and verifying proper assembly. If the device overheats, allow it to cool down before resuming use. Refer to the video below for detailed instructions.
7. Awọn pato
| Brand | Jimmy |
| Orukọ awoṣe | Iye ti o ga julọ ti BX7 |
| Pataki Ẹya | Ti sodi |
| Àlẹmọ Iru | Àlẹmọ HEPA |
| Wattage | 550 watt |
| Agbara afamora | 16kp |
| Agbara | 1.1 Poun (Eruku Cup) |
| Ọja Mefa | 16.14"L x 12.99"W x 9.84"H |
| Iwọn Nkan | 6.49 iwon |
| Agbara Okun Ipari | 16.4 ft |
| UV Light wefulenti | 254nm |
| Alapapo otutu | Titi di 149°F (65°C) |
| inu ile / ita gbangba Lilo | Ninu ile |
8. Atilẹyin ọja ati Support
The product comes with a 1-year warranty for quality problems, offering a replacement machine or refund. If issues arise after 1 year, please contact customer support for parts replacement or repair services.
9. Aabo ikilo
- Always disconnect the power plug before cleaning or performing maintenance.
- Ma ṣe lo UV lamp to irradiate people or pets directly.
- Do not use the electric corded mattress vacuum anywhere with water.
- Ensure the brush head, dust cup, and filter are installed correctly before use.
- Not suitable for long velvet, long fluff carpets, or hard floors.
- The mattress vacuum cleaner is designed for beds, mattresses, pillows, cribs, and other flat fabric surfaces.
