Olùbẹ̀rẹ̀ ìfìhàn UIBI X3 àti X7 pẹ̀lú Ìwé Àfọwọ́kọ Olùlò Afẹ́fẹ́ Compressor

1. Ifihan

Thank you for choosing the UIBI X3 or X7 Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a high-performance tire inflator, a portable power bank, and an emergency LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and charging needs on the go.

This manual will guide you through the proper use, maintenance, and troubleshooting of your UIBI jump starter. Please read it thoroughly before first use to ensure safe and optimal performance.

2. Alaye Aabo

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle.

• Ka Gbogbo Awọn Ilana: Before operating the jump starter, read and understand all safety information and operating instructions.
• Idaabobo Oju: Always wear safety glasses when working with batteries.
• Afẹfẹ: Ensure adequate ventilation when jump starting a vehicle.
• Idena sipaki: Avoid creating sparks near the battery. Do not smoke or allow open flames near the battery or jump starter.
• Polarity: So clamps with correct polarity. Connecting incorrectly can cause damage to the device, battery, or vehicle.
• Awọn ọmọde ati awọn ohun ọsin: Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde ati awọn ohun ọsin.
• Ibi ipamọ: Tọju ẹrọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Damaged Device: Do not use the device if it is damaged, cracked, or leaking.
• Gbigba agbara: Only charge the device using the provided charging cable and a compatible adapter.
• Ifihan omi: Ma ṣe fi ẹrọ naa han si ojo tabi ipo tutu.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan wa ninu apo rẹ:

• UIBI X3 or X7 Jump Starter
• Smart Jumper Cables
• Air Hose with Nozzles (for various inflatables)
• USB-C Ngba agbara Cable
• Ọran ipamọ
• Itọsọna olumulo

Nọmba 3.1: UIBI X3 and X7 Jump Starters shown with all included accessories, including smart jumper cables, air hose, various nozzles, and charging cables, neatly organized in their storage cases.

4. Ọja Ipariview

Familiarize yourself with the components of your UIBI jump starter.

Nọmba 4.1: The UIBI X3 model, highlighting its digital display for battery level and pressure, and the control buttons for jump start, air compressor, and LED light functions.

Nọmba 4.2: The UIBI X7 model, featuring its larger digital display for real-time pressure and battery status, along with intuitive control buttons for various modes.

Awọn eroja pataki:

• Ifihan Digital: Shows battery level, air pressure (PSI, BAR, KPA, Kg/cm²), and operational modes.
• Bọtini agbara: Yipada ẹrọ si tan/pa.
• Bọtini Ipo (M): Switches between air compressor modes (e.g., car, motorcycle, bicycle, ball).
• +/- Awọn bọtini: Adjusts target air pressure.
• Ibudo Ibẹrẹ Fo: For connecting smart jumper cables.
• Ibudo Hose Air: For connecting the air hose.
• USB-A Output (QC3.0): For charging electronic devices.
• Type-C PD45W Input/Output: For charging the jump starter and charging electronic devices.
• Ina filaṣi LED: Provides illumination, strobe, and SOS signals.

5. Eto

Before first use, ensure the jump starter is fully charged.

5.1 Gbigba agbara akọkọ

1. Connect the provided USB-C charging cable to the Type-C PD45W port on the jump starter.
2. So opin miiran okun USB-C pọ si ohun ti nmu badọgba ogiri USB ibaramu (kii ṣe pẹlu).
3. The digital display will show the charging progress. Charge until the battery indicator shows full.

Nọmba 5.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output.

Gbigba agbara kikun maa n gba to wakati mẹrin pẹlu ṣaja PD45W.

6. Operating Instructions (Jump Starter)

Follow these steps to safely jump start your vehicle.

1. Ṣeto Ọkọ naa: Turn off the vehicle's ignition and all accessories (headlights, radio, A/C). Engage the parking brake.
2. So awọn okun Jumper pọ mọ olubere Jump: Insert the blue plug of the smart jumper cables into the jump start port on the UIBI device. Ensure a firm connection.
3. Darapọ mọ Clamps sí Batiri:
   • Sopọ awọn Pupa (+) clamp si awọn rere (+) ebute batiri ọkọ ayọkẹlẹ naa.
   • Sopọ awọn DUDU (-) clamp si awọn odi (-) ebute batiri ọkọ ayọkẹlẹ naa.

   The smart jumper cables will beep if an incorrect connection is detected. Correct the connection before proceeding.
4. Bẹrẹ Ọkọ naa: Ni kete ti clamps are correctly connected and the indicator on the smart cable is solid green (or as per cable indicator), start your vehicle's engine.
5. Yọ Clamps: Once the vehicle starts, immediately remove the BLACK (-) clamp first, then the RED (+) clamp from the battery. Disconnect the smart jumper cables from the UIBI device.

Nọmba 6.1: The UIBI X7 Jump Starter connected to a car battery, demonstrating the proper setup for jump-starting a vehicle. The display shows '8.8.8' indicating readiness.

Nọmba 6.2: The UIBI X3 Jump Starter connected to a car battery, illustrating the connection of the smart clamps to the battery terminals for a quick and safe jump start.

Akiyesi: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

7. Air Compressor Operation

The UIBI jump starter features a built-in air compressor for inflating tires and other inflatables.

1. So Air Hose: Screw the air hose into the air hose port on the jump starter.
2. So Nozzle: Select the appropriate nozzle for your item (e.g., Schrader valve for car tires, needle for balls) and attach it to the end of the air hose.
3. Agbara Tan: Press the Power button to turn on the device. The display will show the current pressure.
4. Select Mode (Optional): Press the 'M' (Mode) button to cycle through preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode has a default pressure, which can be adjusted.
5. Ṣeto Ipa Ibi-afẹde: Use the '+' and '-' buttons to set your desired pressure.
6. Ibẹrẹ Iṣeduro: Press the Power button again to start the air compressor. The display will show the real-time pressure.
7. Tiipa aifọwọyi: The compressor will automatically stop once the preset pressure is reached.
8. Ge asopọ: Unscrew the air hose from the item and the jump starter.

Nọmba 7.1: The UIBI X7 Jump Starter actively inflating a car tire, demonstrating its cordless air compressor function. The display shows the current PSI reading.

Nọmba 7.2: The UIBI X3 Jump Starter in use, inflating a car tire. This image highlights the multi-use air pump feature with auto-stop functionality.

8. Iṣẹ́ Báńkì Agbára

The UIBI jump starter can charge your electronic devices.

1. So ẹrọ pọ: Use a compatible USB cable (not included) to connect your smartphone, tablet, or other electronic device to either the USB-A (QC3.0) output port or the Type-C PD45W port on the jump starter.
2. Agbara Tan: Press the Power button on the jump starter to activate the charging function.
3. Gbigba agbara: Your device will begin charging. The jump starter's display may show its remaining battery level.

Nọmba 8.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output, allowing it to function as a portable power bank.

9. Iṣẹ́ Ìmọ́lẹ̀ LED

The integrated LED flashlight offers three modes for various situations.

1. Tan-an: Press and hold the LED light button (often integrated with the power button or a dedicated button) to turn on the flashlight.
2. Yi awọn ọna pada: Briefly press the LED light button repeatedly to cycle through the modes:
   • Imọlẹ Iduroṣinṣin: Fun itanna gbogbogbo.
   • Imọlẹ Strobe: Fun ifihan agbara tabi fifamọra akiyesi.
   • Ifihan agbara SOS: For emergency situations, emitting the Morse code SOS pattern.
3. Paa: Press and hold the LED light button again to turn off the light.

Nọmba 9.1: The UIBI X7 Jump Starter demonstrating its emergency LED light, capable of providing stable illumination, strobe, and SOS signals for various situations.

10. Ngba agbara ẹrọ

To ensure your UIBI jump starter is always ready, recharge it after each use or when the battery level is low.

• Connect the provided USB-C charging cable to the Type-C PD45W input port on the jump starter.
• Connect the other end of the USB-C cable to a USB wall adapter (e.g., 5V/2A, 9V/2A, or PD45W compatible).
• The digital display will indicate the charging status. Charge until the battery icon shows full.
• It is recommended to fully charge the device every 3-6 months even if not in use to maintain battery health.

11. Itọju

Proper maintenance will extend the life of your UIBI jump starter.

• Ninu: Mu ẹrọ naa nu pẹlu asọ ti o gbẹ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
• Ibi ipamọ: Store the device in its carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Itọju Batiri: Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
• Ayẹwo USB: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

12. Laasigbotitusita

Ti o ba pade awọn ọran, tọka si awọn iṣoro ti o wọpọ ati awọn ojutu wọnyi.

Ti iṣoro naa ba wa lẹhin igbiyanju awọn solusan wọnyi, jọwọ kan si atilẹyin alabara.

13. Awọn pato

14. Atilẹyin ọja ati Support

UIBI products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included in your package or visit the official UIBI website. If you have any questions or require assistance, do not hesitate to contact our customer service team.