TOUCAN RC HOBBY Lesu 1/14 8x8 Hydraulic RC Dumper Truck

Ọrọ Iṣaaju

This manual provides essential information for the assembly, operation, and maintenance of your TOUCAN RC HOBBY Lesu 1/14 8x8 Hydraulic RC Dumper Truck. Please read these instructions carefully before operating the model to ensure safe and correct usage.

Package Awọn akoonu

• 1/14 MAN 8x8 Hydraulic Dumper Truck Body (Painted)
• Servo idari
• Shift Steering Servo
• Lock Differential Steering Servo
• eefun ti Motor
• Hydraulic ESC (Electronic Speed Controller)
• Power ESC (Electronic Speed Controller)
• 540 Power Motor
• LED Light System
• 3T Sound System
• 2-Speed High Torque Gearbox
• FS I6S Controller and IA10B Receiver

Awọn nkan Ko To wa

• Batiri
• Ṣaja

Alaye Aabo

This product is recommended for users aged 14 years and up. Adult supervision is advised for younger users. Always operate the RC dumper truck in a safe environment, away from people, pets, and obstacles. Do not operate near water or in wet conditions. Ensure all components are securely fastened before operation. Disconnect the battery when not in use and during maintenance.

Ṣeto

Apejọ akọkọ

The truck body is pre-painted. Slight assembly of the cabin may be required. Refer to the detailed assembly diagrams (if provided separately) for specific steps. Ensure all screws are tightened appropriately, but do not overtighten.

Aworan 1: Iwaju view of the assembled dumper truck with the dump bed in a raised position.

Fifi sori batiri

A suitable battery (not included) is required for operation. Consult the specifications for recommended battery types and voltage. Carefully connect the battery to the designated power connector, ensuring correct polarity. Secure the battery within its compartment to prevent movement during operation.

Transmitter and Receiver Setup

The FS I6S Controller and IA10B Receiver are included. Refer to the separate manual for the FS I6S transmitter for detailed binding and calibration procedures. Ensure the transmitter and receiver are properly bound before attempting to operate the truck.

Awọn ilana Iṣiṣẹ

Awọn iṣakoso ipilẹ

Use the FS I6S Controller to operate the truck. The primary controls typically include:

• Ijoko: Ó ń ṣàkóso ìṣísẹ̀ síwájú àti ìyípadà.
• Itọnisọna: Controls left and right turning.
• Shift Gear: Activates the 2-speed gearbox.
• Differential Lock: Engages/disengages differential lock for improved traction.
• Hydraulic Dump: Controls the raising and lowering of the dump bed.

Hydraulic System Operation

The hydraulic system operates the dumper bed. Use the designated control on your transmitter to raise and lower the bed. Operate the hydraulic system smoothly to prevent damage. The system pressure is rated for 20-25KG.

Aworan 2: alaye view of the hydraulic cylinder responsible for lifting the dump bed.

Gearbox Operation

The 2-speed high torque gearbox allows for different driving speeds and power. Use the shift control on your transmitter to switch between gears. It is recommended to stop the truck or reduce speed before shifting gears to avoid strain on the gearbox.

Sound and Light System

The truck is equipped with an LED light system and a 3T sound system. These can typically be activated and controlled via specific channels or switches on your FS I6S transmitter. Refer to your transmitter manual for exact control assignments.

Aworan 3: Ẹgbẹ profile of the dumper truck, illustrating the dump bed in a partially raised position.

Itoju

Ninu

After each use, especially in dusty or dirty conditions, clean the truck using a soft brush or compressed air to remove debris. Avoid using water directly on electronic components. A damp cloth can be used for the exterior body.

Lubrication

Periodically inspect moving parts, especially the hydraulic cylinder and gearbox components, for wear. Apply appropriate RC-grade lubricant to gears and pivot points as needed to ensure smooth operation and longevity.

Image 4: Close-up of the rear wheel assembly and suspension system.

Ibi ipamọ

Store the RC dumper truck in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery from the truck and transmitter if storing for extended periods. Ensure the model is clean before storage.

Laasigbotitusita

• Truck does not respond to transmitter:
  Check battery levels in both the truck and transmitter. Ensure the transmitter and receiver are properly bound. Verify all connections are secure.
• Hydraulic dump bed not lifting/lowering:
  Check hydraulic fluid levels (if applicable and accessible). Inspect hydraulic motor and ESC connections. Ensure no obstructions are present.
• Awọn ariwo ti ko wọpọ lakoko iṣẹ:
  Inspect gears for debris or damage. Check for loose components or screws. Lubricate moving parts as necessary.
• Reduced performance or range:
  Ensure antennas on both truck and transmitter are correctly positioned. Check for interference from other electronic devices.

Awọn pato

Atilẹyin ọja ati Support

Specific warranty information is not provided within the product details. For any support inquiries, technical assistance, or warranty claims, please contact the manufacturer or seller directly. You can visit the TOUCAN RC HOBBY Store for contact information or further assistance.