Ọrọ Iṣaaju
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 3L Ultrasonic Cleaner. Please read this manual thoroughly before initial use and retain it for future reference.
Awọn iṣọra Aabo
- Maṣe ṣajọpọ ẹyọ naa.
- Do not use flammable or corrosive liquids.
- Always use sufficient fluid to cover items.
- Unplug before filling & draining.
- Rii daju pe a gbe ẹyọ naa sori iduro, ipele ipele.
- Jeki kuro ni arọwọto awọn ọmọde.
Figure 1: CREWORKS 3L Ultrasonic Cleaner with its digital control panel and open lid, showcasing the stainless steel tank.
Ohun ti o wa ninu Apoti
Ni ṣiṣi silẹ, rii daju pe gbogbo awọn paati wa ati pe ko bajẹ:
- 1 x Ultrasonic Cleaner Unit
- 1 x Stainless Steel Basket
- 1 x Okun Agbara
- 1 x Itọsọna olumulo (iwe yii)
Ṣeto
- Ibi: Place the ultrasonic cleaner on a firm, level, and dry surface, away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- Asopọ agbara: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch on the back of the unit is in the OFF position before plugging in.
- Kun ojò: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. The liquid level should be between the MIN and MAX marks, ensuring items to be cleaned are fully submerged but not overflowing. Do not operate the unit without liquid in the tank.
- Inserting Items: Place items to be cleaned into the stainless steel basket. Lower the basket gently into the tank. Avoid direct contact of items with the tank bottom to ensure optimal cavitation.
Figure 2: Close-up of the intuitive digital control panel, displaying temperature and timer settings for easy operation.
Awọn ilana Iṣiṣẹ
- Agbara Tan: Flip the main power switch located on the back of the unit to the ON position. The digital display will illuminate.
- Ṣeto iwọn otutu: Press the "TEMP" button to adjust the desired cleaning solution temperature. Use the up/down arrows to set the temperature between 68°F and 176°F (20°C and 80°C). The unit will begin heating automatically.
- Ṣeto Aago: Press the "TIME" button to adjust the desired cleaning duration. Use the up/down arrows to set the timer for up to 30 minutes.
- Bẹrẹ Isọmọ: Once temperature and time are set, the ultrasonic cleaning process will begin. The display will show the remaining time.
- Lakoko Isẹ: The unit will produce a slight humming sound and visible cavitation bubbles. This is normal. Avoid touching the tank or solution during operation.
- Ipari Yiyi: The unit will automatically stop when the timer reaches zero.
- Yọ Awọn nkan kuro: Carefully lift the basket out of the tank. Rinse the cleaned items under clean water and dry them thoroughly.
Figure 3: Illustration of the powerful ultrasonic cavitation process, where 40 kHz frequency sound waves create microscopic bubbles that implode, effectively cleaning intricate surfaces.
Figure 4: Visual comparison demonstrating the effective cleaning results on various items, including eyeglasses, a razor, and a circuit board.
Itoju
- Sisọ tanki naa: After each use, especially if the solution is dirty, unplug the unit and drain the liquid using the built-in drain valve. Tilt the unit slightly towards the drain for complete emptying.
- Ninu ojò naa: Rinse the stainless steel tank with clean water. Wipe the interior and exterior of the unit with a soft, damp asọ. Ma ṣe lo awọn afọmọ abrasive tabi fi ibọmi apakan akọkọ sinu omi.
- Ibi ipamọ: Store the unit in a cool, dry place when not in use. Ensure the tank is completely dry before storage.
- Rirọpo Fuse: In case of power issues, check the fuse located near the power inlet. Replace with a fuse of the same rating if necessary. (Note: Refer to the product's electrical specifications for fuse type and rating).
Figure 5: Key design features contributing to durability and stable operation, including the robust stainless steel basin, noise-reducing cover, and non-skid rubber feet.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ko ni agbara lori. | Okun agbara ko sopọ; Pa agbara; Fiusi ti fẹ. | Ensure power cord is securely plugged in; Turn power switch ON; Check and replace fuse if necessary. |
| No ultrasonic sound/cavitation. | Insufficient liquid; Unit not started; Malfunction. | Ensure liquid level is adequate; Press start button; Contact customer support if problem persists. |
| Àwọn àbájáde ìwẹ̀nùmọ́ tí kò dára. | Incorrect cleaning solution; Insufficient cleaning time; Overloaded tank; Items touching tank bottom. | Use appropriate cleaning solution for items; Increase cleaning time; Do not overload; Use basket to suspend items. |
| Alapapo iṣẹ ko ṣiṣẹ. | Temperature not set; Heater malfunction. | Set desired temperature using the control panel; Contact customer support if problem persists. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | DUC-1003-00 |
| Iwọn ojò | 3 L (galonu 0.8) |
| Agbara Ultrasonic | 120W |
| Alapapo Agbara | 100W |
| Ultrasonic Igbohunsafẹfẹ | 40 kHz |
| Iwọn otutu | 68-176°F (20-80°C) |
| Ibiti Aago | 1-30 iṣẹju |
| Ohun elo ojò | Ounje-Grade 304 Irin alagbara |
| Ọja Mefa | 13.5 x 7.6 x 11.81 inches |
| Iwọn Nkan | 7.41 iwon |
Figure 6: Detailed dimensions of the ultrasonic cleaner unit and its removable cleaning basket.
Atilẹyin ọja ati Support
CREWORKS stands behind the quality of its products. This ultrasonic cleaner comes with a 1-Year Promise. For any questions, technical assistance, or warranty claims, please contact our 24/7 onibara Service. Refer to the product packaging or the official CREWORKS webaaye fun awọn alaye olubasọrọ.
For more information and support, visit the official CREWORKS Store: CREWORKS Store on Amazon.
