Ọrọ Iṣaaju
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP TV Mounts, including the MU0057 Full Motion Wall Mount and the MU0049 Under Cabinet Mount. Please read this manual thoroughly before installation to ensure safe and correct usage.
Alaye pataki Aabo:
- Do not attempt installation if you are unsure about the process. Consult a qualified professional.
- Ensure the mounting surface can support the combined weight of the mount and your television.
- Always use the provided hardware and follow the instructions carefully.
- Pa awọn ọmọde ati awọn ohun ọsin kuro lakoko fifi sori ẹrọ.
- Periodically check all connections for tightness and security.
Package Awọn akoonu
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact MOUNTUP customer support.
- 1 x MOUNTUP MU0057 Full Motion TV Wall Mount
- 1 x MOUNTUP MU0049 Under Cabinet TV Mount
- Hardware Kit (screws, anchors, washers, spacers, etc.)
- Ilana fifi sori ẹrọ (iwe yii)
Aworan: Pariview of the MOUNTUP MU0057 Full Motion TV Wall Mount and MU0049 Under Cabinet TV Mount, including mounting plates and articulating arms.
Awọn pato
MOUNTUP MU0057 Full išipopada TV Wall Mount
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Ibamu TV Iwon | 26 - 60 inches |
| Agbara iwuwo | Titi di 77 lbs (35 kg) |
| VESA ibamu | Max 400x400mm |
| Iṣipopada Iru | Articulating, Full Motion |
| Ohun elo | Aluminum, Steel, or Composite Material |
MOUNTUP MU0049 Under Cabinet TV Mount
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Ibamu TV Iwon | 13 - 32 inches |
| Agbara iwuwo | Titi di 22 lbs (10 kg) |
| VESA ibamu | 75x75mm, 100x100mm |
| Iṣipopada Iru | Foldable, Tilt, Swivel, Rotation |
| Ohun elo | Aluminum, Steel, or Composite Material |
Eto ati fifi sori
Ṣaaju ki o to bẹrẹ:
- Rii daju pe o ni gbogbo awọn irinṣẹ pataki (fun apẹẹrẹ, lu, oluwari okunrinlada, ipele, screwdriver).
- Verify the wall structure (for MU0057) or cabinet structure (for MU0049) can safely support the weight.
- Unpack all components and identify them using the parts list in your physical manual.
Installation of MOUNTUP MU0057 Full Motion TV Wall Mount
This mount is designed for installation on wood studs or concrete/brick walls. Maṣe fi sori ẹrọ lori ogiri gbigbẹ nikan.
- Pinnu Ibi Igbesoke: Use a stud finder to locate the center of the wood studs. Mark the desired height for your TV.
- So Awo Odi: Position the wall plate at the marked location. Use a level to ensure it is straight. Mark the drilling points.
- Awọn Iho Pilot Lilu: Drill pilot holes according to the recommended drill bit size for your wall type (wood stud or concrete).
- Awo Odi to ni aabo: Attach the wall plate to the wall using the appropriate lag bolts and washers. Tighten securely.
- So awọn biraketi TV: Attach the two vertical TV brackets to the back of your television using the correct VESA screws, washers, and spacers. Ensure the brackets are centered and level.
- So TV sori Awo Odi: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the safety locks are engaged.
- Ṣatunṣe ati Ni aabo: Adjust the tilt, swivel, and extension as desired. Tighten any adjustment screws to secure the TV in position.
Image: Components of the MOUNTUP MU0057 wall mount, including the wall plate, articulating arm, VESA plate, and a small level for installation.
Image: The MOUNTUP MU0057 long arm full motion TV mount extended from the wall, showing its maximum extension of 30 inches (750mm) and various arm segment lengths.
Image: The MOUNTUP MU0057 TV mount installed in a room corner, demonstrating its flexible arm folding capability for corner installations.
Installation of MOUNTUP MU0049 Under Cabinet TV Mount
This mount is designed for installation under cabinets or shelves. Ensure the cabinet/shelf material is sturdy enough to support the mount and TV weight.
- Pinnu Ibi Igbesoke: Choose a suitable location under a cabinet or shelf. Ensure there is enough clearance for the TV to fold up and down.
- So Awo Igbesoke: Position the top mounting plate under the cabinet. Mark the drilling points.
- Awọn Iho Pilot Lilu: Drill pilot holes into the underside of the cabinet.
- Awo Igbesoke to ni aabo: Attach the mounting plate using the provided screws. Tighten securely.
- So awọn biraketi TV: Attach the VESA plate to the back of your television using the correct VESA screws, washers, and spacers.
- Connect TV to Mount: Secure the TV (with VESA plate) to the main arm of the under cabinet mount.
- Test Folding Mechanism: Gently test the folding mechanism to ensure smooth operation and proper clearance.
Image: The MOUNTUP MU0049 under cabinet TV mount, showing its compact design and VESA plate.
Image: The MOUNTUP MU0049 under cabinet TV mount installed in a kitchen, illustrating its compatibility with VESA 75x75/100x100, max 32-inch screens, and 22 lbs weight capacity.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its foldable design, showing the TV folded up to 4 inches from the cabinet and folded back 135 degrees.
Awọn ilana Iṣiṣẹ
MOUNTUP MU0057 Full išipopada TV Wall Mount
- Itẹsiwaju/Ipadasẹyin: Gently pull or push the TV to extend or retract the arm.
- Swivel: Yi TV pada si apa osi tabi ọtun lati ṣaṣeyọri ohun ti o fẹ viewigun igun.
- Tẹ: Loosen the tilt adjustment knobs (if applicable), adjust the screen angle up or down, and then re-tighten the knobs.
- Atunse Ipele: Some models allow for minor post-installation leveling adjustments. Refer to your physical manual for specific instructions.
Image: The MOUNTUP MU0057 double arm folding TV mount, illustrating its ability to extend and swivel, allowing the screen to cross the wall for optimal viewing.
MOUNTUP MU0049 Under Cabinet TV Mount
- Titẹ / Ṣiṣii: Gently pull down the TV to unfold it from its stored position. Push it up until it locks into place to fold it away.
- Tẹ: Adjust the screen's vertical angle by tilting the TV up or down.
- Swivel: Rotate the TV horizontally (left or right) for optimal viewing.
- Yiyi: The mount allows for screen rotation (-90°/+90°) to switch between landscape and portrait orientation.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its adjustable viewing angles, including tilt (+3°/-10°), 360° swivel, and -90°/+90° rotation.
Itoju
- Ayẹwo igbagbogbo: Lokọọkan ṣayẹwo gbogbo awọn skru, awọn boluti, ati awọn asopọ lati rii daju pe wọn wa ni wiwọ ati aabo.
- Ninu: Nu oke naa pẹlu asọ ti o gbẹ. Yago fun abrasive ose tabi olomi ti o le ba awọn ipari.
- Lubrication: Moving parts are generally maintenance-free. If any movement becomes stiff, consult customer support before applying lubricants.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| TV is not level after installation (MU0057) | Wall plate not level; minor adjustment needed. | Check the wall plate with a level. Some mounts allow for post-installation leveling. Refer to your physical manual. |
| Oke kan lara riru | Screws not fully tightened; incorrect wall anchors used; wall/cabinet not strong enough. | Ensure all screws are securely tightened. Verify the mounting surface can support the weight. If unsure, consult a professional. |
| TV does not fit the mount | Incorrect VESA pattern; TV too large/heavy. | Verify your TV's VESA pattern, size, and weight against the mount's specifications (MU0057: 26-60 inch, 77lbs, Max 400x400mm; MU0049: 13-32 inch, 22lbs, 75x75/100x100mm). |
| Difficulty moving the mount | Adjustment screws too tight; lack of lubrication. | Loosen any adjustment screws slightly. If the issue persists, contact customer support. |
Atilẹyin ọja ati Support
MOUNTUP products are designed for durability and performance. For warranty information, technical support, or to report missing/damaged parts, please contact MOUNTUP customer service directly.
MOUNTUP Customer Support:
- Webojula: www.mountup.com
- Email: support@mountup.com
- Foonu: 1-800-XXX-XXXX
Please have your model number (MU0057, MU0049) and purchase information ready when contacting support.
