VECYS Bottom Loading Water Dispenser User Manual

1. Ifihan

Thank you for choosing the VECYS Bottom Loading Water Dispenser. This manual provides important information regarding the installation, operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and retain it for future reference.

This water dispenser is designed to provide hot, cold, and room temperature water from 3 or 5-gallon water bottles, featuring a convenient bottom-loading design, child safety lock, and a self-cleaning function.

2. Alaye Aabo

WARNING: To reduce the risk of injury and property damage, you must read this entire guide before assembling, installing, and operating the dispenser.

• Always place the dispenser on a level surface.
• Má ṣe lo ẹ̀rọ ìfọ́mọ́ra pẹ̀lú okùn agbára tàbí plug tí ó ti bàjẹ́.
• Ensure the dispenser is properly grounded.
• Pa ẹrọ naa mọ kuro ninu oorun taara ati awọn orisun ooru.
• Má ṣe tẹ ẹ̀rọ ìfọ́mọ́, okùn, tàbí kí o so omi tàbí omi míràn mọ́ ọn.
• Yọ ẹ̀rọ ìfọ́mọ́ra kúrò kí o tó sọ di mímọ́ tàbí kí o ṣe àtúnṣe èyíkéyìí.
• The hot water faucet is equipped with a child safety lock. Always engage the lock when not in use to prevent accidental hot water dispensing.
• Ohun elo yii kii ṣe ipinnu fun lilo nipasẹ awọn eniyan (pẹlu awọn ọmọde) pẹlu idinku ti ara, imọlara, tabi awọn agbara ọpọlọ, tabi aini iriri ati imọ, ayafi ti wọn ba ti fun wọn ni abojuto tabi itọnisọna nipa lilo ohun elo nipasẹ eniyan ti o ni iduro fun aabo wọn. .

3. Ọja Ipariview

olusin 3.1: Iwaju view of the VECYS Bottom Loading Water Dispenser.

olusin 3.2: Apa view of the VECYS Water Dispenser showing key features and dimensions (40.8in H x 14.2in W x 12.2in D).

Awọn eroja pataki:

• Ibi iwaju alabujuto: Features LED indicators for power, heating, and cooling status.
• Dispensing Faucets: Separate faucets for hot, room temperature, and cold water.
• Titiipa Aabo Ọmọ: Located on the hot water faucet.
• Drip Atẹ: Yiyọ fun rorun ninu.
• Ibùdó Ìkójọpọ̀ Ìsàlẹ̀: Houses the 3 or 5-gallon water bottle.
• Okun Agbara: Fun itanna asopọ.

4. Eto

4.1 Ṣiṣii silẹ

• Fi ìṣọ́ra yọ ẹ̀rọ ìfọ́mọ́ra náà kúrò nínú àpò rẹ̀.
• Ṣe àyẹ̀wò ẹ̀rọ náà fún ìbàjẹ́ èyíkéyìí nínú ìfiránṣẹ́ ọkọ̀. Tí ó bá bàjẹ́, má ṣe ṣiṣẹ́ kí o sì kan sí olùrànlọ́wọ́ oníbàárà.
• Yọ gbogbo awọn ohun elo apoti kuro, pẹlu eyikeyi awọn fiimu aabo tabi awọn teepu.

4.2 Ibi

Figure 4.1: The water dispenser can be placed in various indoor environments such as offices or homes.

• Place the dispenser on a hard, level surface that can support its weight when full.
• Rí i dájú pé ó kéré tán ínṣì mẹ́rin ló wà láti ẹ̀yìn àti ẹ̀gbẹ́ ẹ̀rọ ìfọ́mọ́ sí ògiri láti jẹ́ kí afẹ́fẹ́ máa tàn dáadáa.
• Yẹra fún gbígbé ẹ̀rọ ìfọ́mọ́ra náà sí ojú oòrùn tààrà tàbí nítòsí àwọn ohun èlò tí ń mú ooru jáde.
• Do not place the dispenser in an enclosed area or cabinet.

4.3 Water Bottle Installation (Bottom Loading)

1. Ṣí ìlẹ̀kùn àpótí ìsàlẹ̀ ti ẹ̀rọ ìpèsè náà.
2. Yọ ideri kuro ninu igo omi 3 tabi 5-gallon tuntun kan.
3. Insert the water intake tube (probe) into the opening of the water bottle. Ensure the tube reaches the bottom of the bottle.
4. Gbe igo omi sinu apoti isalẹ.
5. Pa ẹnu-ọna minisita ni aabo.

4.4 Initial Priming and First Use

1. After installing the water bottle, plug the dispenser into a grounded electrical outlet.
2. Allow the dispenser to sit for at least 5 minutes before turning on the heating or cooling functions. This allows water to fill the internal reservoirs.
3. Dispense water from all three faucets (hot, room temperature, cold) until water flows steadily. This purges any air from the lines.
4. Turn on the hot and cold water switches located on the back of the unit (if applicable). The corresponding LED indicators on the front panel will illuminate.
5. Allow approximately 15-20 minutes for the water to reach optimal hot and cold temperatures before first use.

5. Awọn ilana Iṣiṣẹ

5.1 Pipin Omi

Figure 5.1: The dispenser offers hot, normal (room temperature), and cold water options.

Figure 5.2: Visual representation of hot water for beverages, fresh (room temperature) water, and cold water for refreshment.

• Omi Gbona: Push the child safety lock button inward, then press the hot water lever. Release the lever to stop dispensing.
• Omi iwọn otutu yara: Press the room temperature water lever. Release the lever to stop dispensing.
• Omi tutu: Press the cold water lever. Release the lever to stop dispensing.

5.2 Ọmọ Aabo Titii

Figure 5.3: The child safety lock (red button) and LED indicators for heating and chilling.

The hot water faucet is equipped with a two-step child safety lock. To dispense hot water, you must first push the red safety button inward and then press the hot water lever. This mechanism helps prevent accidental burns.

5.3 LED Atọka

The control panel features LED lights that indicate the status of the dispenser:

• Atọka Agbara: Ṣe itanna nigbati ẹrọ naa ba wa ni titan.
• Atọka alapapo: Ó máa ń tànmọ́lẹ̀ nígbà tí ohun èlò ìgbóná omi gbígbóná bá ń ṣiṣẹ́.
• Atọka Itutu: Ó máa ń tànmọ́lẹ̀ nígbà tí ètò ìtútù omi tútù bá ń ṣiṣẹ́.
• Water Bottle Empty Indicator: Illuminates when the water bottle in the bottom compartment is empty and needs replacement.

6. Itọju

6.1 Iṣẹ́ Mímọ́ ara-ẹni

This dispenser features an interior UV light for a self-clean function. Refer to the specific instructions provided with your unit for activating this cycle. Regular use of the self-clean function helps maintain water quality and prevent bacterial growth.

6.2 Ita Cleaning

• Yọ ẹ̀rọ fifa kuro ninu ibudo agbara ṣaaju ki o to nu.
• Mu ese ita gbangba pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Remove and empty the drip tray regularly. Wash it with mild soap and water, then rinse thoroughly and dry before reinserting.

6.3 Sísọ omi kúrò nínú ẹ̀rọ náà

If the dispenser will not be used for an extended period or needs to be moved, it should be drained:

1. Yọọ ẹrọ mimu kuro ki o yọ igo omi kuro.
2. Place a bucket under the drain plug located at the back of the unit.
3. Yọ pulọọgi ìṣàn omi kúrò kí gbogbo omi lè gbẹ kúrò nínú àwọn ibi ìtọ́jú omi.
4. Ni kete ti sisan, rọpo pulọọgi ṣiṣan ni aabo.

7. Laasigbotitusita

8. Awọn pato

9. Atilẹyin ọja ati Support

The VECYS Bottom Loading Water Dispenser (Model BY607WP) is backed by a 1-odun atilẹyin ọja from the date of purchase. This warranty covers manufacturing defects and ensures the product's reliability under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact VECYS customer support. Please have your model number (BY607WP) and proof of purchase available when contacting support.