Ọrọ Iṣaaju
Thank you for choosing the NutriBullet Flip NBP016B Portable Blender. This manual provides essential information for the safe and efficient use of your new portable blender. Please read all instructions carefully before first use and retain this manual for future reference.
Awọn Aabo pataki
When using any electrical appliance, basic safety precautions should always be followed. Failure to do so may result in serious injury or damage to the appliance.
- Read all instructions before operating the NutriBullet Flip.
- Jeki ohun elo ati okun rẹ kuro ni arọwọto awọn ọmọde.
- Ma ṣe fi omi mimọ sinu omi tabi awọn olomi miiran. Mọ pẹlu ipolowoamp aṣọ nikan.
- Ensure the blade assembly is securely attached to the cup before blending.
- Yago fun olubasọrọ pẹlu gbigbe awọn ẹya ara.
- Do not blend hot liquids, as pressure buildup can cause injury.
- Do not overfill the cup beyond the MAX line.
- Always charge the blender using the provided USB-C cable.
- Do not operate the blender if any part is damaged. Contact customer support for assistance.
Kini To wa
Your NutriBullet Flip NBP016B package includes the following components:
- Rechargeable 11.1V Motor Base
- Irin Alagbara Irin Blade Apejọ
- 590 ml Insulated Stainless Steel Cup
- Travel Lid with Handle
- Sip & Straw Lid
- Ideri Blade
- Fifọ Fẹlẹ
- Stainless Steel Straw
- USB-C Ngba agbara Cable
Apejọ ati Ibẹrẹ Oṣo
1. Charging the Blender
Before first use, fully charge your NutriBullet Flip. A full charge provides power for approximately 14 blending cycles of 30 seconds each.
- Locate the USB-C charging port on the motor base.
- Connect the provided USB-C cable to the port and plug the other end into a compatible USB power adapter (not included).
- Ìmọ́lẹ̀ àmì náà yóò máa tàn nígbà tí a bá ń gba agbára, yóò sì máa pa nígbà tí a bá ti gba agbára tán pátápátá.
2. Nto Blender
Follow these steps to assemble your blender for use:
- Place your ingredients into the 590 ml insulated cup. Do not exceed the MAX fill line.
- Align the blade assembly with the top of the cup and twist clockwise until securely tightened.
- Invert the cup so the blade assembly is at the bottom, then align the blade assembly with the motor base and twist clockwise until it locks into place.
Awọn ilana Iṣiṣẹ
1. Blending Your Ingredients
The NutriBullet Flip is designed to blend a variety of ingredients, including ice and frozen fruits, for smoothies and shakes.
- Ensure the blender is fully assembled and charged.
- Press the power button on the motor base to start blending. The blender will run for a preset cycle (typically 30 seconds).
- For optimal results, shake the blender gently during operation if ingredients are thick or stuck.
- Do not continuously blend for more than 30 seconds at a time. Allow the motor to rest between cycles.
2. Using the Insulated Cup
The double-walled stainless steel cup keeps your beverages cold for up to 24 hours, making it ideal for on-the-go use.
3. Using the Lids
Your NutriBullet Flip comes with two convenient lids:
- Sip & Straw Lid: Features a flip-top opening for direct drinking and a slot for the included stainless steel straw.
- Travel Lid with Handle: Designed for secure transport, featuring a robust handle for easy carrying.
4. Gbigbe
The compact design and integrated handle make the NutriBullet Flip easy to carry and fit into car cup holders, ensuring your healthy drinks are always with you.
Itoju ati Itọju
1. Ninu
Proper cleaning ensures the longevity and hygiene of your NutriBullet Flip.
- Ipilẹ mọto: Pa mọto mimọ pẹlu ipolowoamp asọ. Maṣe fi omi mọlẹ rara.
- Apejọ abẹfẹlẹ: Carefully rinse the blade assembly under running water. Use the provided cleaning brush to remove any residue. Be cautious around the sharp blades.
- Cups and Lids: Wash the insulated cup, lids, and straw with warm, soapy water. They are not dishwasher safe.
- Rii daju pe gbogbo awọn ẹya ti gbẹ daradara ṣaaju iṣakojọpọ tabi titoju.
2. Ibi ipamọ
Store the NutriBullet Flip in a clean, dry place when not in use. Ensure the battery is partially charged if storing for extended periods.
Laasigbotitusita
If you encounter issues with your NutriBullet Flip, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Blender does not turn on or blend. | Low battery, improper assembly, or motor overload. | Ensure the unit is fully charged. Check that the blade assembly and cup are securely twisted onto the motor base. Reduce ingredients if overloaded. |
| Awọn eroja ko dapọ laisiyonu. | Too little liquid, too many solid ingredients, or ingredients are stuck. | Add more liquid. Reduce the amount of solid ingredients. Gently shake the blender during operation to dislodge ingredients. |
| Njo lati ago. | Lid or blade assembly not properly sealed. | Ensure the blade assembly is tightly screwed onto the cup and the lid is securely closed. Check the silicone gasket for proper placement. |
| Ina Atọka gbigba agbara ko ṣiṣẹ. | Cable not connected properly or power source issue. | Verify the USB-C cable is firmly connected to both the blender and the power adapter. Try a different USB power source. |
Ti iṣoro naa ba wa lẹhin igbiyanju awọn solusan wọnyi, jọwọ kan si atilẹyin alabara.
Awọn pato ọja
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | NutriBullet |
| Nọmba awoṣe | NBP016B |
| Àwọ̀ | Dudu |
| Awọn iwọn Ọja (L x W x H) | 10.8D x 10.8W x 23.2H cm (approx. 35.6 x 45.6 x 38.8 cm packaged) |
| Agbara | 590 milimita |
| Agbara | 120 Wattis |
| Voltage | 7.4V (Motor Base: 11.1V) |
| Ohun elo | Irin ti ko njepata |
| Iṣe Tiipa Aifọwọyi | Bẹẹni |
| Nọmba ti Awọn iyara | 1 |
| Iwọn Nkan | 1.5 kilo |
| Niyanju Lilo | Juices, Mixing, Protein Shakes |
| Orisun agbara | Agbara Batiri |
Onibara Support
For further assistance, product inquiries, or warranty information, please visit the official NutriBullet website or contact their customer service department. Refer to your product packaging for specific contact details.
O tun le ṣàbẹwò awọn NutriBullet Brand Store on Amazon fun alaye siwaju sii.
