Ọrọ Iṣaaju
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
Eto Itọsọna
1. Unpacking ati Placement
Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. Apejọ
- Gbe awọn platter lori spindle.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. Awọn isopọ
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your amplifier's ground terminal to minimize hum.
Figure 3: Rear connections for RCA output and ground wire.
So adapter agbara pọ mọ turntable ati lẹhinna si ibudo ogiri kan.
Awọn ilana Iṣiṣẹ
1. Agbara Tan / Paa
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
Àwòrán 4: Ipò tí a ti ń lo agbára yípadà.
2. Ti ndun a Gba
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Fi ìṣọ́ra yọ ààbò stylus náà kúrò nínú káàtírì náà.
- Gbe ohun orin soke ni lilo ohun orin gbe lefa.
- Fi pẹ̀lẹ́pẹ̀lẹ́ gbé ohun orin náà sórí ihò ìbẹ̀rẹ̀ tí a fẹ́ nínú àwo orin náà.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. Bluetooth Asopọmọra
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
Itoju
1. Nu Turntable naa
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. Ìtọ́jú Stylus
- Regularly inspect the stylus for dust and debris.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No sound or very low sound | Aṣayan titẹ sii ti ko tọ lori amplifier; loose cables; volume too low. | Rii daju amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| Ohùn humming | Ground wire not connected; interference from other electronics. | Connect the ground wire securely; move turntable away from other electronic devices. |
| Nfo tabi ohun daru | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| Platter ko nyi | Power not connected; power switch off. | Check power connection; ensure power switch is in the 'On' position. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Ọja Mefa | 13.19 x 16.34 x 3.94 inches |
| Iwọn Nkan | 14.92 iwon |
| ASIN | B0DHTXH32G |
| Nọmba Awoṣe Nkan | T1 Evo with Preamp |
| Olupese | Pro-Ject |
| Brand | Pro-Ject |
| Asopọmọra Technology | Ti firanṣẹ |
| Iyara Yiyipo ti o pọju | 45 RPM |
| Pataki Ẹya | Iyara adijositabulu |
| Ara | -Itumọ ti Preamp |
| Àwọ̀ | Yinrin White |
| Orukọ awoṣe | T1 Evo with Preamp |
| Ifihan Ibuwọlu-si-Noise | 70 dB |
| Ọjọ Akọkọ Wa | Oṣu Kẹsan Ọjọ 24, Ọdun 2024 |
Atilẹyin ọja ati Support
Alaye atilẹyin ọja
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
Onibara Support
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject webaaye fun awọn alaye olubasọrọ ati awọn orisun afikun.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
