1. Ifihan
This manual provides essential information for the safe and effective use of your OneTouch Ultra Plus Flex Blood Glucose Monitoring System. Please read it thoroughly before using the device. This system is designed to help individuals with diabetes monitor their blood glucose levels.
Kini To wa:
- 1 OneTouch Ultra Plus Flex Blood Glucose Meter
- 1 OneTouch Delica Plus Lancing Device
- 10 OneTouch Delica Plus 33g Lancets
- Apo ti n gbe
- Afowoyi Olumulo (iwe-ipamọ yii)
Note: OneTouch Ultra Plus Test Strips are sold separately and are required for blood glucose testing.

Image 1.1: Contents of the OneTouch Ultra Plus Flex Bonus Pack, including the meter, lancing device, lancets, and carrying pouch.
2. Eto
2.1 Meter Setup
- Fi Batiri sii: The meter comes with a pre-installed lithium metal battery. If replacing, ensure correct polarity.
- Agbara Ibẹrẹ Tan: Tẹ mọlẹ OK button until the meter turns on. Follow on-screen prompts to set date, time, and measurement units (mg/dL or mmol/L).
2.2 Lancing Device Setup (OneTouch Delica Plus)
- Yọ Fila kuro: Twist the lancing device cap off.
- Insert Lancet: Insert a sterile OneTouch Delica Plus lancet firmly into the lancet holder.
- Twist Off Protective Disk: Twist the protective disk off the lancet and save it for safe disposal.
- Rọpo fila: Replace the lancing device cap.
- Adjust Depth Setting: Rotate the depth wheel to select your desired penetration depth. Start with a shallower setting (e.g., 1 or 2) and adjust as needed for a sufficient blood sample. The OneTouch Delica Plus offers 13 depth settings for personalized comfort.
- Prime Device: Pull back the sliding barrel until it clicks, indicating the device is primed.

Image 2.1: The OneTouch Delica Plus lancing device, designed for comfortable blood sampling with adjustable depth settings.
3. Awọn ilana Iṣiṣẹ
3.1 Performing a Blood Glucose Test
- Prepare Test Strip: Dispense one OneTouch Ultra Plus test strip from its vial. Close the vial immediately to protect remaining strips.
- Fi Ibi Idanwo sii: Insert the test strip into the meter's test port. The meter will turn on automatically.
- Gba Ẹjẹ Sample: Use the primed lancing device to prick the side of your fingertip. Gently squeeze your finger to form a small drop of blood.
- Waye Ẹjẹ Sample: Touch the tip of the test strip to the blood drop. The blood will be drawn into the strip. Hold until the meter beeps and the test begins.
- Ka Awọn abajade: Your blood glucose result will appear on the display in approximately 5 seconds.

Image 3.1: Visual guide illustrating the four steps to take a blood glucose reading with the OneTouch Ultra Plus Flex system.
3.2 ColorSure Technology
The OneTouch Ultra Plus Flex meter features ColorSure Technology, which provides instant feedback on your blood glucose readings. After each test, the meter displays your result along with a color indicator:
- Buluu: Indicates a low blood glucose reading.
- Alawọ ewe: Indicates a blood glucose reading within your target range.
- Pupa: Indicates a high blood glucose reading.
These color indicators help you quickly understand your results and take appropriate action as advised by your healthcare professional.

Image 3.2: The ColorSure Technology display on the OneTouch Ultra Plus Flex meter, visually categorizing blood glucose readings.
3.3 App Connectivity (OneTouch Reveal® App)
The OneTouch Ultra Plus Flex meter can sync your blood glucose data with the OneTouch Reveal® app, available for Fitbit and Apple apps. This allows you to:
- Track your blood glucose trends over time.
- Identify patterns and insights related to your readings.
- See the impact of daily activities, like steps or exercise, on your blood sugar.
Download the OneTouch Reveal® app from the App Store or Google Play to connect your meter and enhance your diabetes management.

Image 3.3: The OneTouch Ultra Plus Flex meter integrating with the OneTouch Reveal app on a mobile device for comprehensive data tracking.

Image 3.4: The OneTouch Reveal app's compatibility with Fitbit and Apple apps, enabling users to sync and analyze their health data.
4. Itọju ati Itọju
4.1 Cleaning the Meter and Lancing Device
- Wipe the exterior of the meter and lancing device with a soft cloth dampened with mild soap and water, or a 70% isopropyl alcohol wipe.
- Do not immerse the meter or lancing device in water or any cleaning solution.
- Ensure no liquid enters the test strip port or battery compartment.
4.2 Ibi ipamọ
- Store the meter and lancing device in the provided carrying pouch.
- Keep them in a cool, dry place, away from direct sunlight and extreme temperatures.
- Store test strips in their original vial with the cap tightly closed.
4.3 Batiri Rirọpo
The OneTouch Ultra Plus Flex meter uses one CR2032 lithium metal battery. When the low battery indicator appears on the display, replace the battery promptly to ensure continuous operation.
- Ṣii ideri iyẹwu batiri ni ẹhin mita naa.
- Yọ batiri atijọ kuro.
- Fi batiri CR2032 titun sii pẹlu ẹgbẹ rere (+) ti nkọju si oke.
- Pa ideri batiri naa ni aabo.
5. Laasigbotitusita
If you encounter issues with your OneTouch Ultra Plus Flex system, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Meter does not turn on. | Dead or incorrectly inserted battery. | Replace battery or ensure it is inserted correctly. |
| Ifiranṣẹ aṣiṣe lori ifihan. | Refer to the specific error code in the full user manual for detailed instructions. Common causes include insufficient blood sample, expired test strip, or damaged strip. | Repeat test with a new strip and sufficient blood sample. Ensure strips are not expired. |
| Awọn kika ti ko pe. | Expired test strips, improper storage, contamination, or meter malfunction. | Check strip expiration date. Ensure proper storage. Clean meter. Perform a control solution test. If issues persist, contact customer support. |
| Lancing device not pricking skin. | Device not primed, lancet not inserted correctly, or depth setting too shallow. | Prime the device. Ensure lancet is fully inserted. Adjust depth setting to a higher number. |
If you continue to experience problems, please contact OneTouch Customer Support for assistance.
6. Awọn pato
- Orukọ awoṣe: OneTouch Ultra Plus Flex
- Orisun Agbara: Batiri irin Litiọmu 1 (CR2032, pẹlu rẹ)
- Awọn Ẹka Iwọn: mg/dL or mmol/L (user selectable)
- Akoko Idanwo: O fẹrẹ to awọn aaya 5
- Iranti: Stores blood glucose results (refer to full manual for capacity)
- Asopọmọra: Bluetooth (for OneTouch Reveal® app)
- Iwọn Iṣiṣẹ: (Refer to full manual for specific range)
- Awọn iwọn: 6.34 x 3.86 x 2.24 inches (Awọn iwọn idii)
- Ìwúwo: 5.93 ounces (Ìwọ̀n Àpò)
- Olupese: AyeScan
7. Alaye Aabo pataki
- Ẹrọ yii wa fun in vitro diagnostic use only. Do not use for diagnosis or screening of diabetes.
- Consult your healthcare professional before making any changes to your medication, diet, or exercise program based on your blood glucose results.
- Keep the meter, lancing device, lancets, and test strips out of reach of children.
- Dispose of used lancets and test strips properly in a sharps container.
- Do not use expired test strips or lancets.
- Always wash and dry your hands thoroughly before and after handling the device and performing a test.
8. Atilẹyin ọja ati Support
The OneTouch Ultra Plus Flex Blood Glucose Monitoring System is manufactured by LifeScan. For warranty information, technical support, or to report any issues with your device, please refer to the contact information provided in the full product documentation or visit the official OneTouch webojula.
It is recommended to register your product to receive important updates and support.





