Ọrọ Iṣaaju
This manual provides essential information for the proper installation, operation, and maintenance of your SRAM Eagle AXS Pod Controller. Please read this manual thoroughly before using the product to ensure safe and efficient performance.
Figure 1: SRAM Eagle AXS Pod Controller
The SRAM Eagle AXS Pod Controller is an electronic bicycle shifter designed for precise and reliable gear changes. It features a compact design and intuitive controls for an enhanced riding experience.
Alaye Aabo
- Always ensure all components are securely fastened before riding. Loose components can lead to loss of control and injury.
- Refer to a qualified bicycle mechanic for installation if you are unsure about any steps.
- Regularly inspect the controller and associated components for wear or damage. Replace worn or damaged parts immediately.
- Keep the controller and battery away from extreme temperatures and moisture.
- Do not attempt to disassemble or modify the controller, as this may void the warranty and cause malfunction.
Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- SRAM Eagle AXS Pod Controller (1 unit)
- Iṣagbesori Clamp (for handlebar attachment)
- Batiri CR2032 (ti a ti fi sii tẹlẹ tabi ti a ya sọtọ)
- Itọsọna Ibẹrẹ kiakia (ti o ba wulo)
Ṣeto
1. Installation on Handlebar
- Ipo: Determine the optimal position for the controller on your handlebar. The clamp-on mount allows for flexible placement.
- Asomọ: Ṣii iṣagbesori clamp and place it around the handlebar. Secure the clamp using the provided bolt and a T25 Torx wrench. Tighten to the manufacturer's specified torque (refer to the quick start guide or SRAM's official documentation for exact torque specifications).
- Iṣalaye: Adjust the angle of the controller for ergonomic access to the buttons.
Figure 2: Controller mounted on handlebar
The image shows the SRAM AXS Pod Electronic Controller securely mounted on a bicycle handlebar, illustrating its compact design and button placement.
2. Pairing with AXS Components
The AXS Pod Controller must be paired with your SRAM AXS derailleur and other AXS components.
- Wake Up Components: Ensure all AXS components (derailleur, dropper post if applicable) are awake by pressing their AXS buttons briefly.
- Tẹ Ipo Sisopọ: Press and hold the AXS button on the derailleur until the LED flashes slowly.
- Adarí Tọkọtaya: Press and hold the AXS button on the Pod Controller until its LED flashes slowly.
- Jẹrisi Isopọpọ: Once both LEDs flash rapidly and then turn solid green, the components are paired. Repeat for any other AXS components.
Figure 3: SRAM AXS Pod Controller
This image displays the SRAM AXS Pod Controller, highlighting its design and the AXS branding, indicating its compatibility within the SRAM AXS ecosystem.
Awọn ilana Iṣiṣẹ
Yiyi Gear
The AXS Pod Controller features two distinct buttons for shifting. By default, the upper button shifts to a larger cog (easier gear), and the lower button shifts to a smaller cog (harder gear).
- Up-shift (Easier Gear): Tẹ awọn upper button ni soki.
- Down-shift (Harder Gear): Tẹ awọn lower button ni soki.
- Multi-shift: Hold down either button to shift multiple gears in succession. The number of gears shifted can be customized via the AXS app.
Customization with AXS App
For advanced customization, download the SRAM AXS app on your smartphone. The app allows you to:
- Reverse shift logic (upper button for harder gear, lower for easier).
- Adjust multi-shift settings (number of gears shifted per hold).
- Monitor battery levels of all AXS components.
- Update firmware for improved performance and features.
Itoju
Ninu
- Mu olutona nu pẹlu ipolowoamp aṣọ láti mú ẹ̀gbin àti ìdọ̀tí kúrò. Yẹra fún lílo àwọn kẹ́míkà líle tàbí àwọn ohun ìfọmọ́ tí ó ń pa ara.
- Do not spray water directly into the controller or its buttons.
Batiri Rirọpo
The AXS Pod Controller uses a CR2032 coin cell battery.
- Wiwọle Batiri: Locate the battery cover on the underside of the controller.
- Yọ Batiri atijọ kuro: Use a small coin or flat-head screwdriver to gently open the cover and remove the old CR2032 battery.
- Fi Batiri Tuntun sii: Fi batiri CR2032 titun sii pẹlu ẹgbẹ rere (+) ti nkọju si oke.
- Ideri to ni aabo: Replace the battery cover and ensure it is securely closed to maintain water resistance.
Akiyesi: Sọ awọn batiri ti a lo ni ifojusọna ni ibamu si awọn ilana agbegbe.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Adarí ko fesi | Kekere tabi okú batiri | Rọpo batiri CR2032. |
| Adarí ko fesi | Not paired with AXS components | Perform pairing procedure as described in the Setup section. |
| Shifting is inconsistent or delayed | kikọlu tabi ifihan agbara alailagbara | Ensure no strong electromagnetic interference sources are nearby. Check battery levels of all AXS components. |
| Cannot customize settings via AXS app | Asopọmọra Bluetooth | Ensure Bluetooth is enabled on your device. Bring your device closer to the bike. Restart the app and components. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | SRAM |
| Orukọ awoṣe | 107603 |
| Nọmba apakan | 00.3018.313.002 |
| UPC | 710845891502 |
| Ohun elo | Apapo |
| Iṣagbesori Iru | Clamp-Lórí Òkè |
| Iwọn Nkan | 0.25 Poun (iwọn 0.11 kg) |
| Awọn iwọn Nkan (LxWxH) | 8 x 5.25 x 2.5 inches (iwọn 20.3 x 13.3 x 6.35 cm) |
| Batiri Iru | Ẹyin Owo -owo CR2032 |
| Asopọmọra | SRAM AXS Wireless Protocol |
Atilẹyin ọja ati Support
SRAM products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SRAM webaaye tabi kaadi atilẹyin ọja ti o wa pẹlu ọja rẹ.
For technical support, troubleshooting assistance, or to locate an authorized service center, please visit the official SRAM support page: www.sram.com/en/sram/support
