Fimco LG-65-HP 65-Gallon Spot Sprayer User Manual

Ọrọ Iṣaaju

The Fimco LG-65-HP 65-Gallon Spot Sprayer is engineered for efficient and versatile application of liquids in various settings, including garden care, pest control, weed management, and the distribution of chemicals or fertilizers. Its robust design and high-performance components ensure reliable operation for both residential and light commercial use. This manual provides essential information for the safe and effective setup, operation, and maintenance of your Fimco spot sprayer.

Alaye Aabo

Always prioritize safety when operating the sprayer. Failure to follow these guidelines may result in personal injury or damage to the equipment.

• Mimu Kemikali: Handle all chemicals safely. Always read and follow the instructions and safety warnings provided by the chemical manufacturer.
• Ohun elo Idaabobo Ti ara ẹni (PPE): Wear appropriate protective gear, including eye protection, gloves, and suitable clothing, to prevent contact with sprayed materials.
• Afẹfẹ: Use the sprayer in well-ventilated areas to avoid inhaling chemical fumes.
• Idasonu: Dispose of unused chemicals and rinse water properly according to local regulations and chemical manufacturer guidelines.
• Aabo Itanna: Ensure all electrical connections to the 12V pump are secure and free from corrosion. Do not operate the pump if wiring is damaged.
• Iduroṣinṣin: Ensure the sprayer tank is securely mounted or placed on a stable, level surface before filling or operating to prevent tipping.
• Awọn ọmọde ati awọn ohun ọsin: Keep children and pets away from the sprayer and spraying area during operation and while chemicals are present.

Irinše Loriview

The Fimco LG-65-HP Spot Sprayer includes several key components designed for optimal performance and ease of use.

An oke view of the Fimco LG-65-HP 65-gallon spot sprayer. The white polyethylene tank is visible, with the black 22-inch Pro Series spray wand, coiled 25-foot hose, and pressure gauge mounted on top. The pump assembly is also visible near the front of the tank.

Awọn eroja to wa:

• 65-Gallon Polyethylene Tank: Durable, UV-resistant tank designed for chemical compatibility and longevity. Features a 5-inch tethered lid for easy access and draining.
• 12-Volt High Flo High Performance Pump: Provides a maximum flow rate of 4.5 GPM and a maximum pressure of 60 psi for consistent spray.
• 22-inch Pro Series Spray Wand: Equipped with an adjustable spray pattern tip and trigger, capable of up to 38 feet horizontal and 27 feet vertical spray.
• 25 feet of 3/8 inch Hose: Pese ample de ọdọ fun orisirisi spraying awọn iṣẹ-ṣiṣe.
• Pressure Control Manifold: Allows for fine-tuning of the spray pattern and pressure.

Awọn ilana iṣeto

Proper setup is crucial for the safe and effective operation of your sprayer.

1. Ṣiṣii ati Ṣiṣayẹwo:

1. Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
2. Inspect all parts for any signs of damage during shipping. Contact your retailer immediately if any damage is found.
3. Rii daju pe gbogbo awọn eroja ti a ṣe akojọ wa.

2. Iṣagbesori ati Gbigbe:

• The sprayer is compatible with UTVs and pickup beds. Securely mount the tank using appropriate straps or fasteners to prevent movement during transport and operation.
• If using as a stationary unit, place it on a firm, level surface.

3. Asopọmọra itanna:

• Connect the 12V pump's power leads to a compatible 12-volt power source (e.g., vehicle battery).
• Ensure the positive (+) lead is connected to the positive terminal and the negative (-) lead to the negative terminal.
• Verify connections are tight and free from corrosion.

4. Hose and Wand Connection:

• Connect the 25-foot hose to the pump outlet and the 22-inch Pro Series spray wand.
• Rí i dájú pé gbogbo àwọn ìsopọ̀ ni a fi ọwọ́ so láti dènà jíjò.

Awọn ilana Iṣiṣẹ

Follow these steps for effective and safe operation of your Fimco spot sprayer.

1. Kikun ojò:

1. Ensure the sprayer is on a level surface.
2. Remove the 5-inch tethered lid.
3. Carefully pour the desired liquid (water, chemical mixture) into the tank. Do not overfill.
4. Rọpo ideri ni aabo.

2. Atokọ Iṣaju iṣaaju:

• Verify all hose connections are secure.
• Check the 12V power connection.
• Ensure the spray area is clear of unintended targets.

3. Spraying Procedure:

1. Turn on the 12V pump. The pump will begin to build pressure.
2. Fi ọ̀pá ìfọ́ náà sí ibi tí a fẹ́ kó o dé.
3. Depress the trigger on the spray wand to begin spraying.
4. Tu okunfa naa silẹ lati da fifa silẹ.

4. Adjusting Spray Pattern and Pressure:

• The 22-inch Pro Series spray wand features an adjustable tip. Rotate the tip to change the spray pattern from a fine mist to a solid stream.
• Use the pressure control manifold to fine-tune the operating pressure, allowing for precise application.

5. Post-Operation Procedure:

• After use, turn off the 12V pump.
• Relieve any remaining pressure in the system by briefly depressing the spray wand trigger.
• Disconnect the 12V power source.
• Clean the sprayer thoroughly as described in the Maintenance section.

Itoju

Regular maintenance ensures the longevity and optimal performance of your Fimco sprayer.

1. Cleaning the Sprayer:

• After each use, especially when spraying chemicals, rinse the tank thoroughly with clean water.
• Run clean water through the pump, hose, and spray wand for several minutes to flush out any chemical residue.
• For stubborn residues, use a mild detergent solution followed by a clean water rinse.
• Ensure the tank is completely drained and dry before storage.

2. Winter Storage:

• Before storing for winter, completely drain all liquids from the tank, pump, and hoses.
• Run RV antifreeze (non-toxic) through the pump and lines to prevent freezing and damage.
• Store the sprayer in a dry, protected area away from freezing temperatures.

3. Pump Care:

• Periodically check the pump's inlet screen for debris and clean as necessary.
• Inspect electrical connections for corrosion and clean with a wire brush if needed.

4. Hose and Wand Inspection:

• Regularly inspect the hose for cracks, kinks, or leaks. Replace if damaged.
• Check the spray wand tip for clogs and clean with a small brush or needle if necessary.

Laasigbotitusita

This section provides solutions to common issues you might encounter with your sprayer.

Imọ ni pato

Atilẹyin ọja ati Onibara Support

For specific warranty information regarding your Fimco LG-65-HP Spot Sprayer, please refer to the warranty card included with your purchase or visit the official Fimco webojula. Awọn ofin atilẹyin ọja le yatọ.

If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Fimco customer support or your authorized dealer. Contact details can typically be found on the manufacturer's webojula tabi rẹ ra iwe.

Note: Always provide your product model number (LG-65-HP) and serial number (if applicable) when contacting support to expedite assistance.