1. Ifihan
The Sena U1 E-Bike Smart Helmet is designed to enhance your cycling experience by integrating advanced communication, safety, and comfort features. This manual provides essential information for the proper use, maintenance, and troubleshooting of your U1 helmet.
Key features include Mesh 2.0 Intercom for reliable rider-to-rider communication, a rear LED for improved visibility, Advanced Noise Control for clear audio, and IPX4 water resistance. The helmet is also designed for comfort with an adjustable fit and ventilation.
2. Ọja Ipariview
2.1 Key Awọn ẹya ara ẹrọ
- Enhanced Mesh 2.0 Intercom: For reliable rider-to-rider communication.
- LED ẹhin: For better visibility at night.
- Iṣakoso Ariwo To Ti Ni Ilọsiwaju: For clear audio in noisy or windy environments.
- IPX4 Omi Resistance: Idaabobo lodi si awọn splashes omi lati eyikeyi itọsọna.
- Convenient Over-the-Air Firmware Updates: Ensures your helmet is always up-to-date.
- NTA (E-Bike helmet certification): Meets safety standards for e-bikes.
2.2 Kini ni Apoti
- U1 Helmet
- Visor (Yellow & Gray)
- Front & Side Pad
- Paadi aarin
- Paadi ẹhin
- Okun USB-C
2.3 Ọja irinše
Nọmba 1: Sena U1 E-Bike Smart Helmet (Matte Gray)
Nọmba 2: Built-in Speakers & Microphone with Advanced Noise Control
Nọmba 3: Integrated Rear LED for enhanced visibility
Nọmba 4: Mesh Intercom allows communication with other riders
2.4 Unboxing the Sena U1 Smart Helmet
Fidio 1: This video demonstrates the unboxing process of the Sena U1 E-Bike Smart Helmet, showcasing all included components and initial setup steps.
3. Eto
3.1 Helmet Fitting
Proper helmet fit is crucial for safety and comfort. Follow these steps to ensure your Sena U1 helmet fits correctly:
- Measure Your Head: Use a flexible tape measure to find the circumference of your head, roughly 1 inch above your eyebrows and the top of your ears. Compare this measurement to the sizing guide below to select the appropriate helmet size.
- Adjust the Dial: Before placing the helmet on your head, open the dial adjustment at the back to its widest setting.
- Ipo ibori naa: Place the helmet on your head, ensuring it sits level and covers your forehead without tilting too far forward or backward.
- Tighten the Dial: Gradually tighten the dial adjustment at the back until the helmet feels snug but comfortable. It should not be too tight or cause pressure points.
- Buckle the Chin Strap: Fasten the chin strap. It should be loose enough to allow you to move your mouth, but tight enough that you can only fit two to three fingers between your chin and the strap.
- Ṣàtúnṣe àwọn okùn ẹ̀gbẹ́: Adjust the buckles on the side straps so they form a 'V' shape just below your ears and lie flat against your head.
Itọsọna iwọn
| Iwọn | Yiyi ori (cm) | Yíyí orí (inṣi) |
|---|---|---|
| M | 55 - 59CM | 21 3/4 - 23 3/8IN |
| L | 59 - 63CM | 23 3/8 - 24 3/4IN |
Helmet Sizing Guide Video
Fidio 2: This video provides a visual guide on how to measure your head and properly fit your Sena cycling helmet for optimal safety and comfort.
3.2 Gbigbe Àṣíborí
The Sena U1 helmet features a USB-C charging port. Connect the provided USB-C cable to the helmet and a power source to charge. A full charge from a dead battery takes approximately 2.5 hours, providing up to 12 hours of talk time.
3.3 Sena gigun kẹkẹ App
Download the Sena Cycling App to manage your helmet settings, customize features, and perform over-the-air firmware updates. This ensures your helmet always has the latest functionalities and enhancements.
Nọmba 5: Ṣakoso awọn eto lati inu foonu rẹ pẹlu Ohun elo Sena Cycling
4. Awọn ilana Iṣiṣẹ
4.1 Agbara Tan / Pa
- Lati Fi agbara: Press the center button and the '+' (volume up) button simultaneously for one second.
- Lati Paarẹ: Press the center button and the '+' (volume up) button simultaneously for one second.
4.2 Mesh Intercom
The U1 helmet features Mesh 2.0 Intercom technology, allowing for hands-free, real-time communication with other Sena helmet users. This system offers high audio quality across multiple open mesh channels.
- Activate/Deactivate Mesh Intercom: Single tap the center button to turn Mesh Intercom on or off.
- Change Mesh Network Channel: Double tap the center button to enter channel selection mode and change your Mesh network.
- Pa ẹ / Mu Gbohungbohun dakẹ: Press the center button for one second to mute or unmute your microphone during a conversation.
Nọmba 6: Enhanced adventure with helmet-to-helmet communication
Nọmba 7: Hands-free operation for safer riding
4.3 Rear LED Lights
The integrated rear LED lights improve your visibility to others, especially in low-light conditions. You can control the lights directly from the helmet or through the Sena Cycling App.
- Tan/Pa: Single press the light button on the helmet to toggle the lights on or off.
- Customize Functions: Use the Sena Cycling App to customize the tail light functions (e.g., solid, flash modes).
4.4 Phone Connectivity
The Sena U1 helmet connects to your smartphone via Bluetooth, allowing you to:
- Hear GPS navigation.
- Take hands-free phone calls.
- Stream music.
5. Itọju
- Ninu: The helmet's inner pads are removable and washable for hygiene.
- Ibi ipamọ: Store the helmet in a cool, dry place away from direct sunlight when not in use.
- Awọn imudojuiwọn famuwia: Regularly check for and install firmware updates via the Sena Cycling App to ensure optimal performance and access to new features.
6. Laasigbotitusita
If you encounter any issues with your Sena U1 helmet, please refer to the following common solutions:
- Ko si Agbara: Ensure the helmet is fully charged. Connect it to a power source using the USB-C cable.
- Awọn Isoro Intercom: Verify that Mesh Intercom is activated. Ensure all riders are within range and on the same Mesh network channel.
- Didara Olohun ko dara: Check that the microphone is not muted. Ensure Advanced Noise Control is active.
- Awọn iṣoro Asopọmọra: If experiencing issues with Bluetooth pairing, try restarting both the helmet and your smartphone. Ensure the Sena Cycling App is up-to-date.
- Helmet Fit: Re-adjust the dial and straps as per the fitting instructions to ensure a snug and comfortable fit without excessive pressure.
For further assistance, please contact Sena customer support.
7. Awọn pato
- Brand: Sena
- Orukọ awoṣe: U1
- Àwọ̀: Matte Grey
- Iwọn: Alabọde
- Ibiti ọjọ ori: Agbalagba
- Ẹya Pataki: Bluetooth
- Ohun elo ode: Acrylonitrile Butadiene Styrene (ABS)
- Ohun elo inu: Polystyrene ti fẹ
- Ìwọ̀n Nkan: 560 giramu
- UPC: 885465021513
- Awọn iwe-ẹri: NTA (E-Bike helmet certification)
8. Atilẹyin ọja & Atilẹyin
The Sena U1 E-Bike Smart Helmet comes with a 2-odun atilẹyin ọja from the date of purchase. This warranty covers manufacturing defects and ensures the product meets quality standards.
For warranty claims, technical support, or any questions regarding your Sena U1 helmet, please visit the official Sena website or contact their customer service department. Keep your proof of purchase for all warranty-related inquiries.
