ZIBOO 15B PRO True RMS Digital Multimeter User Manual

1. Alaye Aabo

Before using the ZIBOO 15B PRO Digital Multimeter, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or personal injury.

1.1 Gbogbogbo Awọn Itọsọna Aabo

• Rí i dájú pé multimeter náà wà ní iṣẹ́ àti ìwọ̀n tó yẹ kí o tó ṣe àwọn ìwọ̀n.
• Má ṣe lo multimeter tí ó bá hàn pé ó ti bàjẹ́ tàbí tí àwọn ìdánwò náà bá ti bàjẹ́.
• Observe all safety precautions for working with electricity, including wearing appropriate personal protective equipment (PPE).
• Never exceed the maximum input values for any function.
• The device is rated CAT III 600V and CAT II 1000V. Adhere to these ratings for safe operation.
• The multimeter features double fuse protection to prevent damage from overload.

2. Ọja Ipariview

The ZIBOO 15B PRO True RMS Digital Multimeter is a compact and reliable tool designed for a wide range of electrical testing applications. It offers accurate measurements for AC/DC voltage, AC/DC current, resistance, continuity, diode, capacitance, and duty cycle. Its True RMS capability ensures precise readings for non-sinusoidal waveforms.

olusin 1: Iwaju view of the ZIBOO 15B PRO Digital Multimeter, showing the display, rotary dial, and function buttons.

2.1 Key Awọn ẹya ara ẹrọ

• RMS otitọ: Provides accurate measurements for both sinusoidal and non-sinusoidal AC waveforms.
• Awọn iṣiro 6000 Ifihan: High-resolution display for precise readings.
• AC/DC Voltage: Measures up to 1000V.
• Agbara AC/DC: Measures up to 10A (optional current clamp for up to 600A).
• Resistance, Continuity, Diode, Capacitance, Duty Cycle: Essential functions for comprehensive electrical troubleshooting.
• VFD AC 600V: Variable Frequency Drive measurement capability.
• NCV/LIVE: Non-Olubasọrọ Voltage and Live Wire Detection with Red LED Flash.
• Idaduro data: Freezes the displayed reading for easier recording.
• Imọlẹ ẹhin: Bright white backlight for clear visibility in various lighting conditions.
• Ààbò Casing: Durable outer casing for enhanced protection.

Figure 2: Visual representation of the various measurement functions available on the multimeter.

2.2 Kini ni Apoti

• ZIBOO 15B PRO Digital Multimeter
• Multimeter Test Leads (Red and Black)
• Protective Caps for Test Leads
• Itọsọna olumulo

Note: AC pliers are an optional accessory and are not included with the standard package.

3. Eto

3.1 Fifi sori batiri

1. Rii daju pe multimeter naa ti wa ni pipa.
2. Wa yara batiri ni ẹhin ẹrọ naa.
3. Unscrew the single Phillips #1 screw to open the compartment.
4. Insert three AA 1.5V batteries, observing correct polarity.
5. Rọpo ideri kompaktimenti batiri ki o ni aabo pẹlu dabaru.

3.2 Nsopọ Awọn itọsọna Igbeyewo

1. Fi okun idanwo dudu sinu jaketi 'COM' (Common).
2. Fún ọ̀pọ̀lọpọ̀ ìwọ̀n (ìwọ̀n)tage, resistance, continuity, diode, capacitance, frequency, duty cycle), insert the red test lead into the 'VΩHz' jack.
3. For current measurements up to 10A, insert the red test lead into the '10A' jack.
4. Fun milliampere (mA) or microampere (µA) measurements, insert the red test lead into the 'µAmA' jack.

Figure 3: The ZIBOO 15B PRO Multimeter with its test leads, showing the connection points.

4. Awọn ilana Iṣiṣẹ

4.1 Agbara Tan / Pa ati Ifihan

Turn the rotary dial from 'OFF' to any desired function to power on the multimeter. To power off, turn the dial back to 'OFF'. The device features an automatic power-off function to conserve battery life. Press the LED button to activate or deactivate the display backlight for improved visibility.

4.2 Awọn iṣẹ wiwọn

Rotate the dial to select the desired measurement function. Use the MODE button to toggle between different sub-functions within a dial position (e.g., AC/DC voltage, NCV/LIVE).

1. VoltagÌwọ̀n e (AC/DC):
   Set the dial to 'V~' for AC voltage or 'V=' for DC voltage. Connect the test leads in parallel to the circuit or component being measured. The display will show the voltage kika.
2. Ìwọ̀n Lọ́wọ́lọ́wọ́ (AC/DC):
   Set the dial to 'A~' for AC current or 'A=' for DC current. Ensure the red test lead is in the appropriate current jack (10A or µAmA). Connect the multimeter in series with the circuit.
3. Wiwọn Atako (Ω):
   Set the dial to 'Ω'. Connect the test leads across the component. Ensure the circuit is de-energized before measuring resistance.
4. Idanwo Ilọsiwaju ():
   Set the dial to 'Ω' and press MODE until the continuity icon appears. A buzzer will sound and a green LED will flash if continuity is detected (low resistance).
5. Idanwo Diode ():
   Set the dial to 'Ω' and press MODE until the diode icon appears. Connect the test leads across the diode.
6. Iwọn Agbara (F):
   Set the dial to 'F'. Connect the test leads across the capacitor. Ensure the capacitor is discharged before measurement.
7. NCV (Non-Kan si Voltage) / LIVE (Live Wire Detection):
   Set the dial to 'NCV LIVE'. The multimeter will detect AC voltage without direct contact. 'L' indicates a live wire with voltage, accompanied by a red LED flash and buzzer. 'EF' indicates non-contact detection.

Figure 4: The multimeter's NCV function detecting voltage near an electrical outlet, indicated by 'EF' on the display.

4.3 Awọn iṣẹ pataki

• MU: Tẹ awọn DIMU bọ́tìnì láti dì kíkà tó wà lórí ìbòjú náà. Tẹ̀ lẹ́ẹ̀kan síi láti tú u sílẹ̀.
• MIN / MAX: Tẹ awọn MIN / MAX button to record the minimum and maximum values during a measurement session. Press again to cycle through MIN, MAX, and current readings.
• RANGE: Tẹ awọn RANGE button to switch between auto-ranging and manual ranging.

5. Itọju

5.1 Ninu

Nu multimeter c nuasing pẹlu ipolowoamp Aṣọ àti ọṣẹ ìfọṣọ díẹ̀. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ. Rí i dájú pé ẹ̀rọ náà gbẹ pátápátá kí o tó lò ó.

5.2 Batiri Rirọpo

When the battery indicator appears on the display, replace the batteries as described in Section 3.1. Always use three new AA 1.5V batteries.

5.3 Fiusi Rirọpo

The multimeter is equipped with internal fuses for protection. If a current measurement function stops working, the fuse may need replacement. To access the fuses, open the battery compartment (Section 3.1). The fuses are located inside. Replace with fuses of the correct type and rating (e.g., 10A/1000V and 500mA/1000V).

olusin 5: Ti abẹnu view highlighting the double fuse protection for safety and durability.

5.4 Ìtọ́jú Olórí Ìdánwò

The test leads come with protective caps. Use these caps to protect the sharp tips when not in use or when measuring in situations where only a short tip is required. This helps prevent damage to the probes and ensures safety.

6. Laasigbotitusita

If you encounter issues with your ZIBOO 15B PRO Digital Multimeter, refer to the following common troubleshooting steps:

• Ko si Ifihan/Ifihan Arun: Check battery levels and replace if necessary. Ensure the multimeter is powered on.
• Awọn kika ti ko tọ: Verify the test leads are correctly inserted into the appropriate jacks for the selected function. Ensure the rotary dial is set to the correct measurement type and range. Check for damaged test leads.
• Iṣẹ́ lọ́wọ́lọ́wọ́ kò ṣiṣẹ́: The internal fuse for current measurement may have blown due to an overload. Replace the fuse as described in Section 5.3.
• Continuity Buzzer Not Sounding: Ensure the multimeter is in continuity mode. Check for open circuits or high resistance.

For persistent issues, consult the manufacturer's support resources.

7. Awọn pato

Note: Accuracy specifications are typical values and may vary slightly.

Figure 6: A detailed table outlining the technical specifications for the ZIBOO 15B PRO multimeter.

8. Atilẹyin ọja ati Support

For warranty information and customer support, please refer to the official ZIBOO website or contact the seller directly through the platform where the product was purchased. Standard return policies typically apply (e.g., 30-day return window).