Ìwé Ìtọ́ni fún Okùn Gbigbe PATPET P 642

Ọrọ Iṣaaju

This manual provides essential instructions for the proper use and maintenance of your PATPET P Collar 642 Charging Cable. This cable is specifically designed to charge PATPET P Collar 642 devices efficiently and safely. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

This image displays the PATPET P Collar 642 charging cable. It has a standard USB-A connector at one end, which plugs into a power adapter or computer. The other end splits into two USB-C connectors, allowing two devices, such as two PATPET P Collar 642 units, to be charged simultaneously from a single USB-A port.

Ṣeto

1. Sopọ si Orisun Agbara: Insert the USB-A end of the charging cable into a compatible USB power adapter (not included), a computer's USB port, or a power bank. Ensure the power source provides stable output.
2. Sopọ si Ẹrọ: Insert the USB-C end(s) of the charging cable into the charging port(s) of your PATPET P Collar 642 device(s). The cable is designed to charge up to two collars simultaneously.
3. Jẹrisi Asopọmọra: Confirm that the cable is securely connected to both the power source and the device(s). The device's charging indicator (if available) should activate, signaling that charging has begun.

Awọn ilana Iṣiṣẹ

The PATPET P Collar 642 Charging Cable operates automatically once connected. It facilitates the transfer of power from a USB source to your PATPET P Collar 642 devices.

• Akoko gbigba agbara: Charging time may vary depending on the battery level of the device(s) and the output of the power source. Refer to your PATPET P Collar 642 device manual for specific charging duration recommendations.
• Gbigba agbara nigbakanna: The dual USB-C design allows for convenient charging of two PATPET P Collar 642 units at the same time.
• Ge asopọ: Once charging is complete, gently disconnect the USB-C connector(s) from the device(s) and then remove the USB-A connector from the power source.

Itoju

• Ninu: Keep the cable and connectors clean and free from dust and debris. Use a soft, dry cloth to wipe the cable if necessary. Avoid using liquids or harsh chemicals.
• Ibi ipamọ: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid bending or kinking the cable sharply, which can damage internal wires.
• Mimu: Always grasp the connector ends when plugging in or unplugging the cable. Do not pull on the cable itself, as this can cause damage to the connectors or wiring.
• Ayewo: Periodically inspect the cable for any signs of wear, fraying, or damage. Discontinue use if any damage is observed and replace with an official PATPET charging cable.

Laasigbotitusita

• Ohun elo Ko Ngba agbara:
  • Ensure the cable is securely connected to both the power source and the device(s).
  • Gbiyanju ohun ti nmu badọgba agbara USB ti o yatọ tabi ibudo USB.
  • Verify that the PATPET P Collar 642 device is functioning correctly and its charging port is clean.
• Gbigba agbara lọra:
  • Ensure the power adapter provides sufficient output (e.g., 5V/1A or higher).
  • Avoid using uncertified or low-quality power sources.
• Ibaje okun USB: If the cable shows signs of physical damage (fraying, exposed wires, bent connectors), discontinue use immediately to prevent potential hazards.

Awọn pato

Alaye atilẹyin ọja

Specific warranty details for this charging cable are typically provided with the main PATPET P Collar 642 product or can be found on the official PATPET website. Please refer to the documentation included with your primary device or visit the manufacturer's webAaye fun okeerẹ atilẹyin ọja ofin ati ipo.

Onibara Support

For technical assistance, troubleshooting, or inquiries regarding your PATPET P Collar 642 Charging Cable, please contact PATPET customer support. Contact information can usually be found on the official PATPET website or within the packaging of your PATPET P Collar 642 device.

O tun le ṣabẹwo si PATPET Store on Amazon fun afikun alaye ọja ati awọn orisun atilẹyin.