1. Awọn ilana aabo
Jọ̀wọ́ ka àwọn ìtọ́ni wọ̀nyí dáadáa kí o tó fi sori ẹ̀rọ àti lílò. Pa ìwé ìtọ́ni yìí mọ́ fún ìtọ́kasí ọjọ́ iwájú.
- Aabo Itanna: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off the main power supply before installation, maintenance, or repair.
- Voltage: This product operates on AC 85V-265V. Ensure your power supply matches this requirement.
- Omi Resistance: The light fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use, avoid submerging it in water.
- Giga fifi sori ẹrọ: For optimal motion detection, install the light at a height of approximately 1.8 to 2.5 meters (5.9 to 8.2 feet).
- Iwọn Iṣiṣẹ: Ensure the operating environment is within the specified temperature range to prevent damage.
2. Package Awọn akoonu
Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- DELIPOP LED Wall Light (2 units)
- Ohun elo iṣagbesori (awọn skru, awọn ìdákọró ogiri)
- Ilana itọnisọna
3. Awọn ẹya Ọja
- Sensọ Iṣipopada Iṣọkan: Detects movement within 3 to 8 meters (10 to 26 feet) at a 120° angle.
- Isẹ aladaaṣe: Light turns on automatically at night when motion is detected and turns off approximately 15 seconds after no motion is detected.
- LED Lilo Agbara: 24W power consumption with a long lifespan of over 50,000 hours.
- Imọlẹ Funfun Gbona: 3000K color temperature for a comfortable and inviting ambiance.
- Ikole ti o tọ: Made from die-cast aluminum alloy body and PC lampshade, resistant to rust, yellowing, high temperatures, and impacts.
- IP65 Mabomire: A ṣe apẹrẹ fun lilo ita gbangba, ti o ni resistance si awọn ipo oju ojo oriṣiriṣi.
Figure 3.1: Product dimensions and key components including high-quality LED chip, die-cast aluminum lamp body, and PIR motion sensor.
4. Awọn pato
| Iwa | Iye |
|---|---|
| Brand | DELIPOP |
| Awoṣe | 24W LED Wall Light with Motion Sensor |
| Awọn iwọn (L x W x H) | 29 x 10 x 9 cm (11.41 x 3.93 x 3.54 inches) |
| Iwọn | 1.8 Kilograms (per unit, for 2 units) |
| Voltage | AC 85V-265V |
| Agbara | 24 Wattis |
| Flux Imọlẹ | 2370 Lumens |
| Iwọn otutu awọ | 3000K Gbona White |
| Ohun elo | Aluminiomu, Polycarbonate (PC) |
| Mabomire Rating | IP65 |
| Iyipo sensọ igun | 120° |
| Ibi sensọ išipopada | Mẹ́tà mẹ́ta sí márùn-ún (ẹsẹ̀ mẹ́wàá sí mẹ́rìndínlógún) |
| Idaduro aifọwọyi | Approx. 15 seconds (after no motion) |
| Igba aye | > 50,000 wakati |
| Agbara Agbara Kilasi | E |
Figure 4.1: EU Energy Efficiency Label for the DELIPOP light. For more details, refer to the Ibi ipamọ data EPREL (ọna asopọ koodu QR).
5. Itọsọna fifi sori ẹrọ
Pataki: Always ensure the main power supply is turned off before starting installation. It is recommended to have this product installed by a professional electrician.
- Mura agbegbe fifi sori ẹrọ: Choose a suitable wall location, ideally between 1.8 to 2.5 meters (5.9 to 8.2 feet) high, for optimal motion sensor performance. Ensure the surface is clean and stable.
- Samisi Awọn aaye Liluho: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the wall.
- Awọn iho iho: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall anchors if necessary.
- Asopọmọra Waya: Carefully connect the household electrical wires to the light fixture's wires. Ensure correct polarity (Live, Neutral, Ground) according to local electrical standards. Use appropriate wire connectors and ensure all connections are secure and insulated.
- Gbe Imuduro: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached and stable.
- Pada Agbara pada: Once installation is complete and all connections are secure, turn the main power supply back on.
Olusin 5.1: Example of the DELIPOP wall light installed on an exterior wall.
6. Awọn ilana Iṣiṣẹ
The DELIPOP LED wall light features an integrated motion sensor for automatic operation.
- Isẹ ọjọ: During daylight hours, the light will remain off to conserve energy, even if motion is detected.
- Isẹ Alẹ: When it is dark, the motion sensor becomes active. If motion is detected within its 3-8 meter range and 120° angle, the light will automatically turn on.
- Tiipa aifọwọyi: The light will remain on as long as continuous motion is detected. Approximately 15 seconds after no motion is detected, the light will automatically turn off.
Figure 6.1: Visual representation of the motion sensor's operational cycle, including daytime standby, nighttime activation, and automatic deactivation.
7. Itọju ati Itọju
Regular cleaning and proper care will ensure the longevity and optimal performance of your DELIPOP wall light.
- Ninu: Ge asopọ agbara ṣaaju ṣiṣe mimọ. Nu imuduro pẹlu asọ, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or components.
- Ayewo: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.
- Awọn LED: The integrated LED light source is designed for a long lifespan and is not user-replaceable.
Figure 7.1: The DELIPOP wall light is designed to be IP65 waterproof and resistant to cold weather conditions.
8. Laasigbotitusita
If you encounter issues with your DELIPOP wall light, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan ni alẹ. | 1. Ko si ipese agbara. 2. Sensor obstructed or faulty. 3. Still too bright (daylight sensor active). | 1. Check power connections and circuit breaker. 2. Ensure sensor is clean and unobstructed. Test sensor by waving hand. 3. Wait until it is sufficiently dark. |
| Imọlẹ duro nigbagbogbo. | 1. Iṣipopada ilọsiwaju ti a rii. 2. Sensor faulty. | 1. Ensure no constant movement (e.g., swaying branches, pets) is within sensor range. 2. Contact customer support if problem persists after checking for motion. |
| Ina flickers tabi dims. | 1. Ipese agbara ti ko ni iduroṣinṣin. 2. Loose onirin asopọ. | 1. Consult an electrician to check power stability. 2. Turn off power and check all wiring connections. Re-secure if loose. |
9. Atilẹyin ọja ati Support
DELIPOP is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LED wall light, please contact DELIPOP customer service through your purchase platform.
Jọwọ tọka si iwe rira rẹ fun awọn ofin ati ipo atilẹyin ọja kan pato.
