Ìwé Ìtọ́ni fún Ìjókòó Ọkọ̀ Graco Nautilus 2.0 LX 3-in-1

1. Ifihan ati Loriview

This instruction manual provides essential information for the proper installation, use, and maintenance of your Graco Nautilus 2.0 LX 3-in-1 Car Seat. Please read all instructions carefully before using the car seat and keep this manual for future reference. Correct usage is crucial for your child's safety.

The Graco Nautilus 2.0 LX is designed to adapt to your child's growth, offering three modes of use:

1. Forward-Facing Harness: For children weighing 26.5-65 lb.
2. Highback Booster: For children weighing 40-100 lb.
3. Backless Booster: For children weighing 40-120 lb.

Image 1.1: The Graco Nautilus 2.0 LX 3-in-1 Car Seat.

2. Alaye Aabo

Always prioritize your child's safety. This car seat is designed to meet safety standards, but proper installation and use are paramount.

• Never use a car seat that has been involved in a moderate to severe crash, even if it appears undamaged.
• Always secure your child in the car seat, even for short trips.
• Ensure the car seat is correctly installed in your vehicle according to the instructions for the chosen mode of use.
• Do not use accessories or parts not approved by Graco.
• Ṣe ìforúkọsílẹ̀ ìjókòó ọkọ̀ rẹ láti gba àwọn àtúnṣe pàtàkì nípa ààbò àti ìwífún nípa ìrántí.

3. Awọn ẹya Ọja

The Graco Nautilus 2.0 LX includes several features designed for safety, comfort, and ease of use:

• 3-ni-1 Apẹrẹ: Transitions from forward-facing harness to highback booster to backless booster.
• InRight LATCH System: Provides a secure, one-second attachment to your vehicle's LATCH anchors with an audible click for confirmation.
• Eto Ailewu Ṣatunṣe Ijanu: Allows the headrest and harness to adjust together in one motion, eliminating the need for rethreading.
• Steel-Reinforced Frame: Provides strength and durability.
• 4-Position Recline: Offers comfort for your child and helps achieve a proper fit in your vehicle.
• Àwọn Olùmú Ife Tí A Ṣẹ̀pọ̀: Two personal cup holders for convenience.
• ProtectPlus Engineered: Designed to help protect in frontal, side, rear, and rollover crashes.

Image 3.1: Key features of the Graco Nautilus 2.0 LX car seat, including the 10-position adjustable headrest, ProtectPlus Engineering, steel-reinforced frame, easy access to installation instructions via QR code, 2 cup holders, and 4-position recline.

For detailed installation instructions, scan the QR code on the car seat or visit: http://x-qr.net/1SKP

4. Eto ati fifi sori

Proper installation is critical. Refer to your vehicle's owner's manual for specific information regarding car seat installation and LATCH anchor locations.

4.1. Forward-Facing Harness Installation (26.5-65 lb)

1. Place the car seat forward-facing in the back seat of your vehicle.
2. Wa awọn ìdákọ̀ró LATCH ti o wa ni isalẹ ọkọ ayọkẹlẹ rẹ.
3. Attach the car seat's InRight LATCH connectors to the vehicle's lower anchors. Listen for an audible click to confirm connection.
4. Press down firmly on the car seat while pulling the LATCH strap to remove slack. The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.
5. Attach the top tether strap to your vehicle's tether anchor and tighten.

Image 4.1: Demonstrating the InRight LATCH system for easy and secure attachment.

4.2. Siṣàtúnṣe Harness ati Headrest

The Simply Safe Adjust Harness System allows for simultaneous adjustment of the headrest and harness height.

1. Locate the adjustment handle at the top of the headrest.
2. Squeeze the handle and slide the headrest up or down until the harness straps are at or slightly above your child's shoulders.
3. Release the handle to lock the headrest and harness into position.

Image 4.2: The Simply Safe Adjust harness system allows the headrest and harness to move together.

5. Awọn ọna ṣiṣe

The Graco Nautilus 2.0 LX offers three distinct modes to accommodate your child's growth.

Image 5.1: The three modes of use for the Graco Nautilus 2.0 LX car seat.

5.1. Forward-Facing Harness Mode

Use this mode for children weighing 26.5-65 lb. Ensure the 5-point harness is properly adjusted and snug against your child's body. The chest clip should be at armpit level.

5.2. Highback Booster Mode

For children weighing 40-100 lb. In this mode, the car seat's internal harness is removed, and your vehicle's lap and shoulder belt are used to secure your child. Ensure the shoulder belt lies flat across the center of your child's shoulder and chest, and the lap belt is low on the hips, touching the thighs.

5.3. Backless Booster Mode

For children weighing 40-120 lb. The backrest of the car seat is removed, and only the booster base is used. Your vehicle's lap and shoulder belt are used to secure your child, following the same guidelines as the highback booster mode.

6. Itọju

Ìmọ́tótó àti ìtọ́jú déédéé yóò ran ìgbádùn ìjókòó ọkọ̀ rẹ lọ́wọ́.

• Paadi ijoko: The seat pad is machine washable. Refer to the care tag on the pad for specific washing instructions. Use cold water and a gentle cycle. Drip dry. Do not use bleach.
• Awọn okun Ijanu: Fi ìpolówó nu awọn okùn ìdènàamp cloth. Do not machine wash or immerse in water, as this may weaken the straps.
• Didi: Clean the buckle by placing it in a cup of warm water and gently agitating it. Do not use soaps or detergents.
• Ṣiṣu ati Irin Awọn ẹya: Wipe with mild soap and cool water.

7. Laasigbotitusita

If you encounter issues with your Graco Nautilus 2.0 LX car seat, consider the following common solutions:

• Ijanu Lilọ ni iṣoro: Ensure the harness straps are not twisted. Check that no fabric or clothing is obstructing the harness path.
• Fifi sori ẹrọ alaimuṣinṣin: Re-read the installation instructions carefully. Ensure the LATCH connectors are fully engaged and the strap is pulled tight while pressing down on the car seat. Verify that the car seat does not move more than 1 inch at the belt path.
• Didi Didi: Clean the buckle as described in the Maintenance section (Section 6). Avoid food debris or liquids entering the buckle mechanism.

For persistent issues or concerns, contact Graco customer support.

8. Awọn pato

9. Atilẹyin ọja ati Support

For warranty information, product registration, or customer support, please visit the official Graco website or contact their customer service department. Keeping your purchase receipt and product registration information readily available will assist in any warranty claims or support inquiries.

Graco Official Webojula: www.gracobaby.com