CUIPPWRJ Petrel 120X HD Digital Racing Drone User Manual

1. Ìfihàn àti Ìtọ́sọ́nà Ààbò

This manual provides essential instructions for the safe operation, setup, and maintenance of your CUIPPWRJ Petrel 120X HD Digital Racing Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.

Awọn iṣọra Aabo:

• Máa lo drone náà ní àwọn ibi tí ó ṣí sílẹ̀, ní ibi tí ó jìnnà sí ènìyàn, ẹranko, àti àwọn ìdènà.
• Rí i dájú pé gbogbo àwọn propellers wà ní ìsopọ̀mọ́ra tí ó dájú àti pé wọn kò bàjẹ́ kí wọ́n tó fò.
• Pa ọwọ ati oju mọ kuro ninu awọn propellers ti n yipo.
• Do not operate the drone in adverse weather conditions (e.g., strong winds, rain).
• Regularly inspect the drone for any signs of damage or wear.
• Use only recommended batteries and charging equipment.
• Tẹle awọn ilana agbegbe nipa iṣẹ drone.

2. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• 1x Petrel 120X HD Toothpick Frame
• 1x Zeus25 AIO 3-6S Flight Controller
• 1x CADDX Vista Nebula Nano Cam
• 4x 1404 KV3600 Motor
• 8x 3016 3 Inch 3-Blade Propellers
• 1x Hammer Antenna (LHCP)
• 2x 10*150mm Battery Strap
• 1x Receiver (Optional, TBS Nano BNF variant includes receiver)

This image displays the CUIPPWRJ Petrel 120X HD Digital Racing Drone. It features a black frame, four motors with propellers, and a central camera unit. The drone is designed for agility and speed.

3. Imọ ni pato

4. Ni ibẹrẹ Oṣo

1. Ṣiṣii ati Ṣiṣayẹwo: Carefully remove all components from the packaging. Inspect the drone frame, motors, propellers, and electronics for any visible damage.
2. Fifi sori ẹrọ Propeller: Attach the 3016 3-inch 3-blade propellers to the 1404 KV3600 motors. Ensure correct rotation direction (CW and CCW) as indicated on the propellers and motors. Secure them firmly.
3. Asopọ batiri: Connect a fully charged 4S LiPo battery (300mAh - 650mAh recommended) to the drone's power lead. Ensure the polarity is correct. The drone should power on.
4. Receiver Binding (for BNF versions):
   • For the TBS Nano BNF variant, refer to the specific TBS Nano receiver manual for binding instructions with your compatible radio transmitter.
   • Ensure successful binding before proceeding to flight controller configuration.
5. Flight Controller Configuration (Betaflight):
   • Connect the drone to your computer via USB.
   • Ṣii sọfitiwia atunto Betaflight.
   • Ensure the flight controller firmware is BF ZEUSF722_AIO. Update if necessary.
   • Configure your receiver, modes (Arm, Angle, Acro, etc.), and OSD settings as per your preference.
   • Calibrate the accelerometer.
6. CADDX Vista Nebula Nano Cam Setup:
   • Power on the drone and your FPV goggles.
   • Follow the CADDX Vista instructions to bind the unit to your FPV goggles for digital video transmission.
   • Verify clear video feed and OSD display.

5. Awọn ilana Iṣiṣẹ

1. Ṣiṣayẹwo Ọkọ ofurufu-ṣaaju:
   • Ensure battery is fully charged and securely attached.
   • Check all propellers for damage and tightness.
   • Verify radio transmitter and FPV goggles are powered on and functioning.
   • Confirm clear FPV video feed.
   • Check flight area for obstacles and people.
2. Gbigbe Drone:
   • Gbe drone sori pẹpẹ kan, ipele ipele.
   • Move the arming switch on your radio transmitter to the 'armed' position (as configured in Betaflight). The motors will spin slowly, indicating the drone is armed.
   • Ikilọ: Once armed, propellers can spin rapidly. Exercise extreme caution.
3. Takeoff and Flight:
   • Gently increase the throttle to lift off.
   • Use the pitch, roll, and yaw controls for directional movement.
   • Bojuto batiri voltage via OSD and land before it drops too low to prevent damage.
4. Landing and Disarming:
   • Reduce throttle slowly to descend.
   • Once on the ground, move the arming switch to the 'disarmed' position. Motors will stop.
   • Disconnect the battery immediately after landing.

6. Itọju

• Ayẹwo igbagbogbo: After each flight, inspect the frame, motors, and propellers for cracks, bends, or loose connections.
• Rirọpo Propeller: Replace any damaged or bent propellers immediately. Damaged propellers can cause instability and reduce flight performance.
• Ninu: Keep the drone clean from dirt, dust, and debris. Use a soft brush or compressed air for cleaning. Avoid using liquids directly on electronic components.
• Awọn imudojuiwọn famuwia: Periodically check for updated firmware for the Zeus25 AIO Flight Controller (BF ZEUSF722_AIO) and CADDX Vista Nebula Nano Cam. Follow manufacturer guidelines for firmware updates.
• Itọju mọto: Ensure motors spin freely. If a motor feels gritty or makes unusual noises, it may require cleaning or replacement.

7. Laasigbotitusita

8. Atilẹyin ọja ati Support

For warranty information, please refer to the terms and conditions provided at the point of purchase. CUIPPWRJ products are typically covered by a limited manufacturer's warranty against defects in materials and workmanship.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Olupese: CUIPPWRJ

ASIN: B0DRPHY2PQ