1. Ifihan
This manual provides essential information for the safe and effective use of your Ortur LU2-10A 10000mW Laser Module. Please read these instructions carefully before installation and operation. This laser module is designed for high-precision engraving and cutting with Ortur Laser Engravers.
2. Package Awọn akoonu
Daju pe gbogbo awọn paati ti a ṣe akojọ si isalẹ wa ninu package rẹ:
Aworan: Alaye view of all components included in the Ortur LU2-10A Laser Module package, such as the laser module, laser shield, air assist, various screws, cables, and tools.
- LU2-10A Laser Module
- Laser Shield
- Air Iranlọwọ
- Atilẹyin Àkọsílẹ
- Slider
- OUC2.0
- Small Coupling
- 24V 2A Power Adapter
- Dedicated LaserWire
- Pipe afẹfẹ
- Pipe Asopọ
- Normal Adapter Cable
- Laser Backboard
- M3x5mm Screws*6 (Used for Slider)
- Thumb Screws*2
- M3x8mm Screws*4 (Used for OLM2S2)
- M3x12mm Screws*4 (Used for OLM2)
- Okun Tie * 10
- M3 Gasket*1
- Wrench
- Lẹnsi
- Oluṣakoso ṣiṣan Afẹfẹ
- OLM2/S2 OUC Exclusive Adapter Cable
3. Eto ati fifi sori
This section guides you through the assembly and installation of the LU2-10A Laser Module onto your Ortur Laser Engraver. Ensure the engraver is powered off and disconnected from the power source before beginning installation.
3.1. Installation Tutorial Video
Video: A detailed installation tutorial for the Ortur Laser Master 2 Pro S2 LU2-10A, demonstrating step-by-step assembly and connection procedures.
3.2. Laser Module Installation Steps
- Attach the laser module to the engraver's carriage.
- Secure the laser module using the provided thumbscrews.
- Insert the 5-pin terminal of the dedicated laser line into the laser module's port.
- Connect the other end of the laser line to the appropriate port on the engraver's control board.
- Install the laser shield onto the laser module to ensure eye protection during operation.
- Connect the air assist hose to the air intake port on the laser module and to an external air pump (not included).
Image: The Ortur LU2-10A Laser Module actively cutting a piece of wood, demonstrating its operational capability.
4. Awọn ilana Iṣiṣẹ
The Ortur LU2-10A Laser Module offers powerful and precise capabilities for various materials.
4.1. Key Awọn ẹya ara ẹrọ
- Ibamu gbooro: Compatible with Ortur Laser Master 2, Ortur Laser Master 2 S2, Ortur Laser Master 2Pro S2, and Ortur Laser Master 3 Laser Engravers.
- Ìrísí Àwọn Ohun Èlò: Engrave and cut acrylic, metal, wood, stainless steel, glass, ceramics, leather, food, paper, fabric, and more.
- Ijade ti o lagbara: True 10000mW laser output for effective cutting and engraving.
- Itọkasi giga: Compressed spot size of 0.05mm x 0.1mm for detailed work.
- Iṣiṣẹ to gaju: Lightweight design (235g) allows for engraving speeds up to 15000mm/min.
- Itutu afẹfẹ meji: Optimized cooling system ensures stable long-term operation without overheating.
- Ise iduro: 24V electrical system and high-quality cables support 24 hours of uninterrupted, consistent engraving.
4.2. Gígé àti Gígé Àwọn Agbára
The LU2-10A module is capable of cutting various materials with significant thickness:
- Up to 30mm acrylic.
- Up to 20mm wood.
Image: An internal diagram illustrating how two 5.5W laser beams are combined using light combing lenses to achieve a true 10W output with a precise 0.05 x 0.1mm compressed spot.
Image: The Ortur LU2-10A Laser Module highlighting its air intake for cooling and its lightweight design (only 235g), contributing to high engraving speeds.
Aworan: A sihin view of the Ortur LU2-10A Laser Module, showing the internal arrangement of two 5.5W lasers combining to form a single 10W output beam.
Image: The Ortur LU2-10A Laser Module featuring its built-in air assist system, with an example showing a cleaner cut (labeled "Ours") compared to a cut without air assist (labeled "Other").
Image: A visual representation of the laser's compressed spot, showing its dimensions of 0.05mm x 0.1mm, which enables extreme precision in engraving.
5. Itọju
Regular maintenance ensures optimal performance and extends the lifespan of your laser module.
- Fifọ lẹnsi: Periodically clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution to prevent residue buildup that can affect laser performance.
- Nozzle Iranlọwọ Afẹfẹ: Ensure the air assist nozzle is clear of debris to maintain effective airflow during cutting and engraving.
- Awọn ololufẹ Itutu: Check the dual cooling fans for dust accumulation and clean them gently to ensure proper heat dissipation.
- Ayẹwo USB: Regularly inspect all cables for any signs of wear, damage, or loose connections.
6. Laasigbotitusita
This section addresses common issues you might encounter with your Ortur LU2-10A Laser Module.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Lésà tí kò ń ta iná tàbí tí kò lágbára. |
|
|
| Inconsistent engraving/cutting results. |
|
|
| Air assist not functioning. |
|
|
7. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Ọja Mefa | 4.72 x 1.97 x 1.73 inches |
| Nọmba Awoṣe Nkan | Ortur-LaserMaster2-ProS2 (LU2-10A variant) |
| Iwọn Nkan | 1.54 iwon |
| Lesa wu Power | 10000mW (10W) |
| Compressed Spot Size | 0.05mm x 0.1mm |
| Iyara Iyara | Títí dé 15000mm/ìṣẹ́jú kan |
| Itutu System | Dual Fan Cooling |
| Itanna System | 24V |
| Ibamu | Ortur Laser Master 2, 2 S2, 2Pro S2, 3 |
8. Atilẹyin ọja ati Support
For warranty information, technical support, or further assistance, please refer to the official Ortur webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira.
Official Ortur Webojula: www.ortur.net
