1. Ifihan
The Daytech DA10 Freezer and Refrigerator Door Alarm is designed to alert users when a refrigerator or freezer door has been left open for an extended period. This device helps prevent food spoilage and unnecessary energy consumption by providing timely audible notifications. It features adjustable delay settings, multiple alarm modes, and customizable volume levels to suit various environments and needs.
2. Awọn ẹya Ọja
- Delayed Alert: Configurable delay times of 1, 2, 3, or 4 minutes before the alarm activates.
- Dual Ringing Modes: Choose between CHIME mode for a gentle reminder or ALARM mode for a loud alert.
- Iwọn ti o le ṣatunṣe: Five volume levels, ranging from 0 dB (silent) to 120 dB, allowing customization for different noise environments.
- Ikilọ Batiri Kekere: The alarm provides a shorter beep duration when batteries are low, indicating it's time for replacement.
- Tiipa aifọwọyi: If the door remains open, the alarm will stop after 30 minutes of continuous activation to conserve battery life.
- Ohun elo to pọ: Suitable for refrigerators, freezers, garage doors, shed doors, windows, cabinets, and other entry points.
Olusin 1: Pariview of Daytech Freezer Door Alarm features.
3. Package Awọn akoonu
Jọwọ ṣayẹwo package lati rii daju pe gbogbo awọn nkan wa:
- Main Alarm Unit (1x)
- Magnetic Strip (1x)
- Awọn batiri AAA (2x)
- Double-sided Adhesive Tape (2x sets)
- Awọn skru iṣagbesori (2x)
- Ilana olumulo (1x)
Fidio 1: Unboxing ati siwaju siiview of the Daytech Freezer Door Alarm contents.
4. Eto ati fifi sori
4.1 Fifi sori batiri
- Open the battery compartment cover on the back of the main alarm unit.
- Fi awọn batiri AAA meji sii, ni idaniloju polarity ti o pe (+/-).
- Pa ideri batiri naa ni aabo.
4.2 Fifi itaniji sori ẹrọ
The alarm can be mounted using either the provided adhesive tape or screws.
- Clean the surface where the alarm will be installed to ensure it is dry and free of dust or grease.
- Attach the double-sided adhesive tape to the back of both the main alarm unit and the magnetic strip. Alternatively, use the provided screws for a more permanent installation.
- Position the main alarm unit on the door frame or the fixed part of the appliance.
- Position the magnetic strip on the moving part of the door, ensuring that the triangle marks on both the main unit and the magnetic strip are aligned.
- The distance between the main unit and the magnetic strip must be less than or equal to 0.98 inches (2.5 cm) nigbati ilekun ti wa ni pipade.
Figure 2: Step-by-step installation guide for the alarm.
Figure 3: Installation and battery replacement visuals.
5. Awọn ilana Iṣiṣẹ
5.1 Agbara Tan / Pa ati Aṣayan Ipo
Use the 'CHIME/ALARM/OFF' switch on the side of the main unit to select the desired mode:
- CHIME: The alarm will emit a chime sound when triggered.
- IKỌ: The alarm will emit a loud siren sound when triggered.
- PA: Itaniji ti wa ni pipa.
5.2 Setting Delay Time (1-4 Minutes)
Press the 'SET' key on the side of the main unit to cycle through the four delay modes. Each press will confirm the mode with a specific number of beeps:
- Mode 1 (1 beep): Alert after 1 minute, beeps every 15 seconds for 5 seconds until the door closes. (Recommended for refrigerators, basement doors).
- Mode 2 (2 beeps): Alert after 2 minutes, beeps every 10 seconds for 10 seconds until the door closes. (Recommended for garages, shed doors).
- Mode 3 (3 beeps): Alert after 3 minutes, beeps every 5 seconds for 15 seconds until the door closes. (Recommended for windows, cabinet doors).
- Mode 4 (4 beeps): Alert after 4 minutes, beeps every 20 seconds for 15 seconds until the door closes. (Recommended for offices, shop doors).
Figure 4: Four selectable delay modes and their alert patterns.
Video 2: Demonstration of setting the delay modes on the Daytech Freezer Door Alarm.
5.3 Siṣàtúnṣe iwọn
Use the volume buttons (+/-) on the side of the main unit to adjust the alarm's loudness. There are 5 levels available, from 0 dB (silent) to 120 dB (maximum loudness).
Video 3: Guide to adjusting the volume levels of the Daytech Freezer Door Alarm.
6. Itọju
6.1 Ninu
Wipe the alarm unit and magnetic strip with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
6.2 Batiri Rirọpo
When the low battery warning is activated (shorter beeps), replace the two AAA batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 4.1.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Itaniji ko dun. | 1. Awọn batiri ti ku tabi ti fi sori ẹrọ ti ko tọ. 2. Alarm is in 'OFF' mode. 3. Magnetic strip is too far from the main unit. | 1. Replace batteries and check polarity. 2. Switch to 'CHIME' or 'ALARM' mode. 3. Adjust placement to ensure distance is ≤ 0.98 inches (2.5 cm). |
| Alarm sounds too frequently. | Delay time is too short. | Increase the delay time using the 'SET' key (Mode 2, 3, or 4). |
| Àkíyèsí náà dákẹ́ jù/kígbe. | Volume level is not set correctly. | Ṣàtúnṣe iwọn didun nípa lílo àwọn bọ́tìnì +/-. |
| Low battery warning persists after replacement. | Incorrect battery type or faulty batteries. | Ensure new, alkaline AAA batteries are used. Try a different set of batteries. |
8. Awọn pato
- Awoṣe: DA10
- Awọn iwọn: 2.52 x 1.34 x 4.57 inches
- Ìwọ̀n Nkan: 3.98 iwon
- Orisun Agbara: 2 x AAA batiri (pẹlu)
- Iru sẹẹli Batiri: Alkaline
- Ọna Iṣakoso: Fọwọkan
- Ipele Ariwo: 0-120 Decibels
- Iru fifi sori: Wall Mount (Adhesive/Screws)
- Ibi sensọ ti o pọju: 0.98 inches (2.5 cm)
9. Atilẹyin ọja ati Support
Daytech products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or contact Daytech customer support. If you encounter any issues or have questions regarding your Daytech DA10 Freezer and Refrigerator Door Alarm, please visit the official Daytech webaaye tabi kan si ẹgbẹ iṣẹ alabara wa fun iranlọwọ.
Ibi iwifunni:
Please refer to the official Daytech webAaye tabi apoti ọja fun awọn alaye olubasọrọ tuntun julọ.
