Tenda AX900 U11Pro WiFi 6 Dual-Band USB Adapter Instruction Manual

1. Ifihan

The Tenda AX900 U11Pro is a high-performance WiFi 6 dual-band USB adapter designed to enhance your computer's wireless connectivity. It supports both 5GHz and 2.4GHz bands, offering faster speeds and improved signal stability. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

Awọn ẹya pataki:

• Meji-Band WiFi 6: Experience up to 600Mbps on the 5GHz band and 286Mbps on the 2.4GHz band, ideal for 4K streaming, online gaming, and video conferencing.
• High-Gain Antenna: Equipped with an external 6dBi omnidirectional antenna that can be rotated for optimal signal reception, significantly improving connectivity in areas with weak signals or interference.
• Iṣeto Rọrun: Features preloaded drivers for quick installation on Windows 11/10/7.
• AP Mode Support: Convert your PC into a Wi-Fi hotspot (5GHz band only) to share your internet connection with up to 8 devices.
• Wider Coverage: Tenda's intelligent algorithm enhances wireless signal transmission for extended range and stability.

2. Eto ati fifi sori

Follow these steps to install and configure your Tenda AX900 U11Pro WiFi Adapter.

2.1 Fifi sori ẹrọ Hardware

1. Fi Adapter sii: Plug the Tenda AX900 U11Pro WiFi Adapter into an available USB port on your desktop or laptop computer. Ensure it is securely connected.
2. Ṣatunṣe Antenna: Rotate the 6dBi omnidirectional antenna to an upright position or adjust it for the best possible signal reception. The antenna offers multi-dimensional rotation for flexibility.

Figure 1: Tenda AX900 U11Pro WiFi Adapter and packaging.

Figure 2: Adjustable antenna for optimal signal.

2.2 Driver Installation (Windows)

For Windows 11/10/7, the adapter comes with preloaded drivers for instant setup. If the driver does not install automatically, follow these steps:

1. After inserting the adapter, a pop-up window may appear. If not, open 'This PC' or 'My Computer' and locate the 'Tenda' drive (similar to a USB storage device).
2. Double-click the 'Setup.exe' file within the Tenda drive to run the driver installation.
3. Tẹle awọn ilana loju iboju lati pari fifi sori ẹrọ.
4. Once the driver is installed, you can proceed to connect to a Wi-Fi network.

2.3 Driver Installation (Linux)

For Linux systems, you will need to download the appropriate driver from the official Tenda website. Refer to the video below for a detailed installation guide.

3. Awọn ilana Iṣiṣẹ

Once the adapter is installed, you can connect to a Wi-Fi network and utilize its features.

3.1 Nsopọ si Wi-Fi nẹtiwọki

1. After successful driver installation, click on the Wi-Fi icon in your computer's taskbar (Windows) or network settings (Linux).
2. Yan nẹtiwọki Wi-Fi ti o fẹ lati atokọ ti awọn nẹtiwọki ti o wa.
3. Tẹ ọrọ igbaniwọle nẹtiwọọki sii ti o ba beere ki o tẹ 'Sopọ'.
4. Your computer should now be connected to the Wi-Fi network via the Tenda AX900 U11Pro adapter.

Figure 3: High-speed Wi-Fi connectivity with AX900 U11Pro.

3.2 AP Mode (Hotspot Function)

The AP Mode allows your computer to function as a Wi-Fi hotspot, sharing its internet connection with other devices. Note that AP Mode only supports the 5GHz band.

1. Ensure your computer has an active internet connection (e.g., via Ethernet or another Wi-Fi adapter).
2. Access your computer's network settings.
3. Locate the 'Mobile hotspot' or 'AP Mode' settings.
4. Ṣe atunto orukọ hotspot (SSID) ati ọrọ igbaniwọle.
5. Enable the hotspot function. Up to 8 devices can connect to your computer's shared Wi-Fi network.

Figure 4: Two Flexible Working Modes: Station Mode and AP Mode.

4. Itọju

To ensure the longevity and optimal performance of your Tenda AX900 U11Pro WiFi Adapter, consider the following maintenance tips:

• Jeki mimọ: Máa fọ ìta adapta náà déédéé pẹ̀lú aṣọ rírọ̀ tí ó gbẹ. Yẹra fún lílo àwọn ohun ìfọṣọ omi tàbí àwọn ohun èlò ìfọṣọ.
• Dabobo lati bibajẹ: Avoid physical impact, bending the USB connector, or excessive force on the antenna.
• Ibi ipamọ to tọ: Nigbati o ko ba si ni lilo, tọju ohun ti nmu badọgba ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
• Awọn imudojuiwọn sọfitiwia: Periodically check the official Tenda webAaye fun awọn awakọ imudojuiwọn tabi famuwia lati rii daju pe ibamu ati awọn ilọsiwaju iṣẹ.

5. Laasigbotitusita

If you encounter issues with your Tenda AX900 U11Pro WiFi Adapter, refer to the following common problems and solutions:

5.1 No Wi-Fi Connection or Frequent Disconnections

• Ṣàyẹ̀wò Asopọ Adapter: Ensure the USB adapter is firmly plugged into a working USB port. Try a different USB port or a USB hub if available.
• Fifi sori Awakọ: Verify that the drivers are correctly installed. Reinstall the drivers if necessary, following the steps in Section 2.
• Disable Built-in Wi-Fi: If your computer has a built-in wireless adapter, disable it to prevent conflicts. Go to Network & Internet settings, then 'Change adapter options', right-click on the built-in wireless adapter, and select 'Disable'.
• Ipo eriali: Adjust the antenna's angle and direction to optimize signal reception.
• Router Distance/Interference: Move closer to your Wi-Fi router or minimize physical obstructions (walls, large appliances) between the adapter and the router.

5.2 Iyara Wi-Fi Lọra

• Check Band: Ensure you are connected to the 5GHz band for higher speeds if your router supports it and your device is within range. The 2.4GHz band offers wider coverage but lower speeds.
• Din kikọlu silẹ: Other electronic devices (microwaves, cordless phones) can interfere with Wi-Fi signals. Try to move them away from your adapter and router.
• Iṣẹ́ Rírọ́ọ̀tù: Ensure your router is functioning optimally and is not overloaded with too many connected devices.
• Imudojuiwọn Awakọ: Check for and install the latest drivers for your adapter from the Tenda webojula.

6. Awọn pato

7. atilẹyin ọja Information

Tenda products typically come with a manufacturer's warranty. Please refer to the product packaging or the official Tenda webAaye fun awọn ofin ati ipo atilẹyin ọja kan pato ti o kan agbegbe rẹ. Pa iwe-ẹri rira rẹ mọ gẹgẹbi ẹri rira fun awọn ẹtọ atilẹyin ọja.

8. Atilẹyin

For further assistance, technical support, or any questions regarding your Tenda AX900 U11Pro WiFi Adapter, please contact Tenda support using the information below:

• Imeeli: support.usa@tenda.cn
• Foonu: +1 800-570-5892