LTS LTN8708D-P8N 8 Channel PoE NVR User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS LTN8708D-P8N 8 Channel Power-over-Ethernet (PoE) Network Video Recorder (NVR). Please read this manual thoroughly before using the product to ensure proper and safe operation.

Ọja Pariview

The LTS LTN8708D-P8N is an 8-channel PoE NVR designed for advanced surveillance systems, supporting up to 12MP resolution cameras. It features intelligent human and vehicle detection capabilities to enhance security monitoring.

Awọn ẹya pataki:

• Up to 8 IP camera input channels.
• Plug & play functionality with 8 power-over-Ethernet (PoE) interfaces.
• Supports H.264 / H.264+ / H.265 / H.265+ video compression formats.
• Decoding capacity: Up to 2 channels at 12 MP, 3 channels at 8 MP, 6 channels at 4 MP, or 12 channels at 1080p.
• Up to 80 Mbps incoming bandwidth.
• Provides MD 2.0 / VCA functions for intelligent detection.
• Includes a pre-installed 2TB hard drive for immediate recording.
• Equipped with 2 SATA interfaces for additional storage expansion.

This image displays the front and rear panels of the LTS LTN8708D-P8N NVR. The front panel typically includes status indicators and a USB port, while the rear panel features multiple PoE ports for camera connections, LAN port, audio input/output, HDMI, VGA, USB ports, and the power input.

Ohun ti o wa ninu Apoti

Nígbà tí o bá ń tú àwọn ohun èlò tí o kọ sílẹ̀, rí i dájú pé gbogbo àwọn ohun èlò tí a kọ sí ìsàlẹ̀ yìí wà ní ipò tó dára:

• LTS LTN8708D-P8N NVR unit (with pre-installed 2TB hard drive)
• Adapter agbara
• Asin USB
• Isakoṣo latọna jijin
• SATA Cables (for additional hard drives)
• àjọlò Cable
• Mounting Screws for HDD

This image shows the accessories typically included with the NVR, which consist of a power adapter, mouse, remote control, SATA cables for additional hard drives, and an Ethernet cable.

Ṣeto

1. Unpacking ati ayewo

Carefully remove the NVR and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact your vendor immediately.

2. Fifi sori ẹrọ Hard Drive (Aṣayan)

Your NVR comes with a 2TB hard drive pre-installed. If you wish to install additional hard drives (up to two SATA drives supported), power off the NVR, open the casing, connect the SATA data and power cables to the new drive, and secure it with the provided screws. Close the casing before powering on.

3. Asopọmọra Agbeegbe

• Awọn kamẹra: Connect IP cameras to the NVR's PoE ports using Ethernet cables. The NVR will provide power and data.
• Atẹle: So atẹle kan pọ si NVR's HDMI tabi ibudo o wu VGA.
• Nẹtiwọọki: Connect the NVR's LAN port to your network router or switch using an Ethernet cable for remote access and internet connectivity.
• Agbara: Connect the provided power adapter to the NVR's power input and then to a power outlet.
• Awọn ẹrọ USB: Connect the USB mouse to a USB port for navigation.

4. Iṣeto ni ibẹrẹ

Upon first power-on, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up administrator passwords, network settings, date/time, and hard drive initialization. Ensure you set a strong password for security.

Awọn ilana Iṣiṣẹ

1. User Interface Navigation

Lo asin USB ti a ti sopọ lati lilö kiri ni wiwo olumulo ayaworan NVR (GUI). Tẹ-ọtun lati wọle si akojọ aṣayan akọkọ, ati tẹ-osi lati yan awọn aṣayan tabi ṣi awọn akojọ aṣayan-ipin.

2. Gbe View ati Sisisẹsẹhin

• Gbe View: Lati akọkọ iboju, o le view live feeds from all connected cameras. Double-click a camera window to view o ni kikun iboju.
• Sisisẹsẹhin: Access the 'Playback' menu to review foo ti o ti gbasilẹtage. Select the desired camera, date, and time to start playback.

3. Human and Vehicle Detection

The NVR's advanced MD 2.0 / VCA functions allow for intelligent detection of humans and vehicles, minimizing false alarms from environmental factors. Configure these settings in the 'Event' or 'Smart Analysis' menu.

This image illustrates the Human and Vehicle Detection feature, highlighting how the NVR can differentiate between humans, vehicles, and other movements like rain, leaves, or animals to reduce false alarms. Alerts are sent to a connected device, as shown by the smartphone notification.

4. Gbigbasilẹ Eto

Customize recording schedules, motion detection areas, and recording quality in the 'Record' menu. You can set continuous recording, motion-triggered recording, or scheduled recording.

5. Wiwọle Nẹtiwọọki

Configure network settings (IP address, port forwarding) in the 'Network' menu to enable remote viewing via a mobile app or web browser. Ensure your network is secure.

Itoju

1. Isakoso Hard Drive

Regularly check the status of your hard drives in the 'HDD Management' menu. Format drives as needed, especially after initial installation or if issues arise. Ensure sufficient storage space for recordings.

2. Awọn imudojuiwọn famuwia

Lorekore ṣayẹwo olupese ká website for firmware updates. Updating the firmware can improve performance, add new features, and enhance security. Follow the provided instructions carefully during the update process.

3. System Backup and Restore

Regularly back up important configuration settings to a USB drive. This allows for quick restoration in case of system resets or failures. The 'Backup' and 'Restore' options are typically found in the 'System' menu.

Laasigbotitusita

Wọpọ Oran ati Solusan

• Ko si Ijade fidio: Check monitor connections, power supply, and ensure the correct input source is selected on the monitor. Verify NVR power status.
• Awọn kamẹra Ko Ṣe afihan: Ensure cameras are properly connected to PoE ports and receiving power. Check camera IP addresses and network settings.
• Ko si Gbigbasilẹ: Verify hard drive status and ensure it is initialized. Check recording schedules and motion detection settings.
• Ikuna Wiwọle Latọna jijin: Confirm network connectivity, correct IP address/port forwarding settings, and firewall configurations. Ensure the mobile app or software is up to date.
• Ọ̀rọ̀ìpamọ́ tí a gbàgbé: Refer to the manufacturer's official support resources for password reset procedures.

Awọn pato

Atilẹyin ọja ati Support

For warranty information, technical support, and service inquiries, please refer to the official LTS Security website or contact your authorized vendor. Keep your purchase receipt and product serial number readily available for any warranty claims or support requests.