Alaye Aabo pataki
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Rii daju pe gbogbo awọn skru ati awọn boluti ti wa ni wiwọ ni aabo ṣaaju lilo.
- Maṣe duro lori alaga.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Package Awọn akoonu
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Hbada P2 Ergonomic Office Chair components
- Assembly hardware kit
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Awọn ilana Apejọ
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Yọ awọn ohun elo kuro: Fara yọ gbogbo awọn ẹya kuro lati apoti ki o si gbe wọn jade.
- So Casters si Ipilẹ: Fi àwọn àtẹ̀gùn sínú ihò ní ìpẹ̀kun ẹsẹ̀ kọ̀ọ̀kan ti ìpìlẹ̀ àga náà. Tẹ̀ ẹ́ dáadáa títí tí wọ́n fi tẹ ibi tí wọ́n wà.
- Fi Gas Gbe soke: Gbe silinda gbe gaasi sinu iho aarin ti ipilẹ alaga.
- Eto Ijoko Kojọpọ: So ẹ̀rọ ìjókòó mọ́ ìsàlẹ̀ ìrọ̀rí ìjókòó náà nípa lílo àwọn skru tí a pèsè. Rí i dájú pé iwájú ẹ̀rọ náà dojúkọ iwájú ìjókòó náà.
- So Armrests: So awọn apa ijoko mọ irọri ijoko naa nipa lilo awọn skru ti a yan.
- So Backrest si Ijoko: Attach the backrest to the seat assembly.
- Apejọ Ijoko si Gaasi Lift: Fi iṣọra gbe ijoko ti o pejọ ati ẹhin ẹhin sori silinda gbigbe gaasi.
- So Headrest: Slide the headrest into the slots at the top of the backrest.
- Ṣayẹwo Ipari: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Awọn ilana Iṣiṣẹ
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Ijoko Giga tolesese
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Isẹ Isunmọ
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Atunse Giga: Push the lumbar support up or down.
- Atunse Ijinle: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Aworan: Alaye view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2D Adjustable Headrest
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Armrest Atunṣe
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Aworan: View of the armrest, indicating the mechanism for height adjustment.
Itoju
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Ninu:
- Fun apapo ati awọn oju aṣọ, lo asọ rirọ dampened with mild soap and water. Avoid harsh chemicals.
- For plastic and metal parts, wipe with a clean, damp asọ.
- Do not saturate the chair with water.
- Ayewo: Lorekore ṣayẹwo gbogbo awọn skru ati awọn boluti lati rii daju pe wọn ṣinṣin. Tun-mu ti o ba wulo.
- Awọn Casters: Jeki awọn casters di mimọ lati irun ati idoti lati rii daju gbigbe dan.
- Gbe gaasi: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Laasigbotitusita
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Alaga ko ṣatunṣe iga | Gas lift malfunction or lever not engaged. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| Chair wobbles or is unstable | Loose skru tabi uneven ijọ. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Casters ko yipo laisiyonu | Idoti mu ni casters. | Nu irun eyikeyi, eruku, tabi idoti kuro ninu awọn kẹkẹ simẹnti. |
| Iduro ẹhin ko ni joko tabi tiipa | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Hbada |
| Nọmba awoṣe | P2 |
| Àwọ̀ | Funfun |
| Ìwò Giga | 105.5 - 126.5 cm (41.5 - 49.8 inches) |
| Iwọn Ipilẹ | 70 cm (27.6 inches) |
| Ifẹ ijoko | 51 cm (20.1 inches) |
| Ijinle ijoko | 52 cm (20.5 inches) |
| Ijoko Height Range | 40 - 48 cm (15.7 - 18.9 inches) |
| Iwọn Nkan | 43 iwon |
| Pada Style | Apapo Pada |
| Kun Ohun elo | Foomu iranti |
| Awọn ipo Isunmọ | 3 (90°, 110°, 135°) |
| Lumbar Support | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Ibugbe ori | 2D Adjustable (Height, 40° Swivel) |
| Armrests | Height Adjustable (7.5 cm / 3 inches range) |
| O pọju iwuwo Agbara | 264 lbs |
Atilẹyin ọja ati Onibara Support
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Atilẹyin ọja: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Pada: A 30-day free return policy is available.
- Price Match: A 15-day price match guarantee is offered.
- Iṣẹ onibara: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada webaaye fun awọn alaye olubasọrọ.
