Ọrọ Iṣaaju
The Avital 5308L Remote Start and Security System is designed to provide enhanced security and convenience for your vehicle. This system integrates advanced security features with remote start capabilities, offering protection against theft and environmental factors.
Important Note: This product is intended for installation by a professional installer only. Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s electrical system and components, and may void the product warranty.
Key Awọn ẹya ara ẹrọ
- 2-Way Command-Confirming Remote: Provides visual and audible confirmation of commands sent to the vehicle.
- 1-Way 4-Button Remote: A secondary remote for basic control functions.
- Remote Keyless Entry: Lock and unlock your vehicle's doors remotely.
- Ibẹrẹ ẹrọ jijin: Start your vehicle's engine from a distance.
- Eto aabo: Includes siren, impact sensor, and starter interrupt for comprehensive vehicle protection.
- Panic (Car Locator) Function: Activates the siren and flashing parking lights to help locate your vehicle or deter threats.
- Compatible with Directed by VOXX SmartStart-Pro: Allows for smartphone control and tracking (additional module may be required).
- Flashing Parking Lights: Visual confirmation of system arming/disarming and alarm triggers.
Awọn eroja To wa
The Avital 5308L system typically includes the following components:
- One (1) 2-Way Command-Confirming Remote
- One (1) 1-Way 4-Button Remote
- Module Iṣakoso akọkọ
- Siren
- Sensọ Ipa
- Awọn isomọ Awọn okun
- Itọsọna olumulo / fifi sori ẹrọ
Nọmba 1: Pariview of the Avital 5308L system, showing both the 2-way LCD remote, the 1-way 4-button remote, and the product packaging.
Eto ati fifi sori
As previously stated, professional installation is mandatory for this product. Do not attempt to install this system yourself unless you are a certified automotive electronics technician.
A qualified installer will perform the following steps:
- Ṣayẹwo fifi sori ẹrọ tẹlẹ: Verify vehicle compatibility and identify necessary wiring points.
- Module Mounting: Securely mount the main control module in a discreet and protected location within the vehicle.
- Awọn isopọ onirin: Connect all necessary power, ground, ignition, accessory, and security-related wires according to the detailed wiring diagram provided with the installation guide. This includes connections for door locks, trunk release, parking lights, and starter interrupt.
- Fifi sori ẹrọ sensọ: Install the impact sensor and adjust its sensitivity as required.
- Siren fifi sori ẹrọ: Mount the siren in a secure location, typically under the hood, ensuring it is protected from elements and accessible for maintenance.
- Eto Latọna jijin: Program the included 2-way and 1-way remotes to the system.
- Idanwo eto: Thoroughly test all functions of the remote start and security system to ensure proper operation and integration with the vehicle's electrical system.
- Ilana olumulo: Provide the vehicle owner with instructions on how to operate the system and its features.
For detailed wiring diagrams and specific installation procedures, refer to the comprehensive installation manual provided with the product, which is intended for professional use only.
Awọn ilana Iṣiṣẹ
This section outlines the basic operation of your Avital 5308L system using the provided remotes.
2-Way Command-Confirming Remote
Nọmba 2: The 2-way LCD remote control, featuring a display for command confirmation and system status.
- Apa/Titiipa: Tẹ awọn Titiipa button once. The remote will confirm the command on its LCD screen and with an audible tone.
- Tu / Ṣii silẹ: Tẹ awọn Ṣii silẹ button once. The remote will confirm the command.
- Ibẹrẹ jijin: Tẹ mọlẹ Bẹrẹ button (often indicated by a car icon or specific symbol) for approximately 3 seconds. The remote will confirm the vehicle has started.
- Ẹ̀rù: Tẹ mọlẹ Ẹ̀rù button (often indicated by a siren icon or specific symbol) for 3 seconds to activate the siren and flashing lights. Press again to turn off.
- Itusilẹ ẹhin mọto: Tẹ mọlẹ ẹhin mọto button (often indicated by a trunk icon) for 3 seconds.
- Ṣayẹwo ipo: Press a dedicated status button (if available) or briefly press the Titiipa button to check the vehicle's armed status.
1-Way 4-Button Remote
Nọmba 3: The 1-way 4-button remote control, providing essential functions without a display.
- Apa/Titiipa: Tẹ awọn Titiipa bọtini lẹẹkan.
- Tu / Ṣii silẹ: Tẹ awọn Ṣii silẹ bọtini lẹẹkan.
- Ibẹrẹ jijin: Tẹ mọlẹ Bẹrẹ button (often indicated by a car icon) for approximately 3 seconds.
- Ẹ̀rù: Tẹ mọlẹ Ẹ̀rù button (often indicated by a siren icon) for 3 seconds. Press again to turn off.
Note: Specific button functions and sequences may vary slightly. Refer to your installer's instructions or the full user manual for precise details.
Itoju
The Avital 5308L system is designed for minimal maintenance. However, consider the following:
- Rirọpo Batiri latọna jijin: When the remote's range decreases or the LCD display on the 2-way remote becomes dim, it's time to replace the battery. Refer to the remote's specific instructions for battery type and replacement procedure.
- Awọn ayẹwo eto: Periodically test all functions (locking, unlocking, remote start, alarm trigger) to ensure the system is operating correctly.
- Ayẹwo Ọjọgbọn: If you experience any persistent issues or wish to add new features, consult with a professional Avital installer.
Laasigbotitusita
Ṣaaju ki o to kan si atilẹyin, tunview Awọn iṣoro ti o wọpọ ati awọn idahun:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Remote not responding / Reduced range | Low remote battery; Interference; Out of range. | Replace remote battery; Move away from sources of interference (e.g., power lines, radio towers); Move closer to the vehicle. |
| Vehicle does not remote start | Hood open; Vehicle not in Park/Neutral; Low fuel; Check engine light on; System disarmed. | Ensure hood is closed; Confirm vehicle is in Park (automatic) or Neutral (manual, if applicable); Check fuel level; Address any vehicle warning lights; Ensure system is armed. |
| Alarm triggers unexpectedly | Impact sensor sensitivity too high; Faulty sensor; Loose wiring. | Consult installer to adjust impact sensor sensitivity; Have system inspected by a professional. |
| Doors do not lock/unlock | Wiring issue; Vehicle's door lock system malfunction. | Have system inspected by a professional. |
If troubleshooting steps do not resolve the issue, please contact your professional installer or Avital customer support for further assistance.
Awọn pato
| Nọmba awoṣe | 5308-L |
| Ọja Mefa | 6.5 x 6.4 x 5.8 inches |
| Iwọn Nkan | 2.35 iwon |
| Ibiti o pọju | 0.25 Miles (approximately 1320 feet) |
| Awọn ẹrọ ibaramu | Directed by VOXX SmartStart-Pro (requires additional module) |
| Remote Controls Included | Yes (One 2-way, One 1-way) |
| Olupese | Audiovox Corporation |
Atilẹyin ọja ati Support
Avital products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Avital website. Warranty claims typically require proof of professional installation.
For technical support, troubleshooting assistance beyond this manual, or to locate an authorized installer, please contact Avital customer service or visit their official support portal. You can often find support information on the manufacturer's website or through your professional installer.
Avital Official Webojula: www.avital.com (This is a placeholder link, please verify the actual official website for Avital support.)
