Ọja Pariview
The RunCam C-20T is a sophisticated 3-axis FPV camera gimbal designed for enhanced stabilization and immersive control in various remote-controlled applications. It features advanced mechanical stabilization and high-torque motors to counteract vibrations and high-speed air impacts, ensuring stable image capture.
This gimbal is compatible with a wide range of digital FPV camera systems, including DJI O3, Walksnail Avatar, Walksnail Moonlight, and RunCam Link Wasp, as well as 19mm wide analog cameras. It supports multiple control interfaces such as UART, PWM, S.BUS, private protocol, and MAVLink, offering flexible integration options.
olusin 1: Iwaju view of the RunCam C-20T 3-Axis FPV Camera Gimbal.
Key Awọn ẹya ara ẹrọ
- Ibamu gbooro: Supports digital FPV Camera systems like DJI O3, Walksnail Avatar, Walksnail Moonlight, RunCam Link Wasp, and 19mm wide analog cameras.
- Immersive FPV Head Tracking: Equipped with Headtracker for enhanced first-person control. Supports UART, PWM, S.BUS, private protocol, and MAVLink.
- Ti o tọ & Apẹrẹ iwuwo fẹẹrẹ: Constructed from aluminum magnesium alloy, ensuring a compact and light form factor.
- Ìdúróṣinṣin Tó Tẹ̀síwájú: Features a 3-axis nonorthogonal mechanical stabilization structure and high-torque motors for extreme vibration and high-speed air impact stabilization.
- Lilo Iwapọ: Supports multiple stabilization modes, suitable for RC cars, crawlers, trucks, FPV airplanes, and drones.
Eto ati fifi sori
Proper installation of the C-20T gimbal is crucial for optimal performance. Follow these steps carefully for camera and air unit integration.
Camera Installation (General Steps)
Figure 2: Diagram illustrating the general camera installation process for the C-20T gimbal.
- Igbesẹ 1: Separate the front and rear housing of the camera module.
- Igbesẹ 2: Carefully take the lens module out from its housing.
- Igbesẹ 3: Fix the lens module into the new lens mount provided with the gimbal.
- Igbesẹ 4: Securely fix the camera assembly onto the gimbal.
- Igbesẹ 5: Replace the coaxial cable from the air unit, connecting it to the gimbal.
Air Unit Integration (Specific Steps)
Figure 3: Diagram illustrating the air unit integration process with the C-20T gimbal.
- Igbesẹ 1: Separate the front and rear housing of the air unit.
- Igbesẹ 2: Replace the coaxial cable from the camera, connecting it to the air unit.
- Igbesẹ 3: Fix the camera onto the gimbal, ensuring a secure fit.
- Igbesẹ 4: Replace the coaxial cable from the air unit, completing the connection.
Awọn ilana Iṣiṣẹ
Ibamu ati Asopọmọra
The C-20T gimbal is designed for broad compatibility with various FPV camera systems. It supports digital systems such as DJI O3, Walksnail Avatar, Walksnail Moonlight, and RunCam Link Wasp. It also accommodates 19mm wide analog cameras like the Caddex FPV Polar or Nebula.
Olusin 4: Pariview of compatible FPV camera systems for the C-20T gimbal.
For control, the gimbal offers multiple interface options including UART, PWM, S.BUS, private protocol, and MAVLink. These interfaces allow for seamless integration with various flight controllers and remote control systems.
Figure 5: Diagram illustrating the various control interfaces supported by the C-20T gimbal.
Awọn ipo imuduro
The C-20T gimbal supports several stabilization modes to adapt to different flight or movement scenarios:
- Ipo Horizon: This mode is designed to keep the image level stable, ideal for maintaining a consistent horizon regardless of vehicle tilt.
- Pitch-lock Mode: In this mode, the roll and yaw axes follow the carrier vehicle's movement, while the pitch axis remains locked, providing a stable vertical view.
- Ipo FPV: This mode offers a 3D follow function, allowing the camera to mimic the user's head movements for an immersive first-person view iriri.
Figure 6: Illustration of the multiple stabilization modes available on the C-20T gimbal.
Head Tracking Control
The gimbal features 3-axis head tracking control, which perfectly follows the head rotation angle for an immersive FPV experience. This allows for intuitive camera control by simply moving your head while wearing compatible FPV goggles.
- Ipo: ±120°
- Eerun: ±60°
- Yaw: ±160°
Figure 7: Visual representation of the 3-axis head tracking control capabilities.
Awọn ohun elo
The C-20T gimbal is versatile and can be used across various platforms, including RC cars, trucks, crawlers, RC airplanes, fixed-wing aircraft, and FPV drones. Its robust stabilization ensures smooth footage even in dynamic environments.
Olusin 8: Examples of platforms where the C-20T gimbal can be effectively utilized.
Itoju
Information regarding routine maintenance procedures for the C-20T gimbal is not explicitly provided in the available documentation. It is generally recommended to keep the device clean and free from dust and debris. Avoid exposing the gimbal to excessive moisture or extreme temperatures.
For detailed maintenance guidelines, please refer to the official RunCam webaaye tabi kan si atilẹyin alabara wọn.
Laasigbotitusita ati FAQ
This section addresses common questions and issues that may arise during the use of your C-20T gimbal.
1. What cameras can the C-20T be compatible with?
The C-20T is available in three versions: O3, Universal, and Analog. The O3 version is specifically designed for the DJI O3 video transmission system and can be equipped with an O3 camera. The universal version can be equipped with all Small cameras (except Nano models), Caddex Vista cameras (camera width 19mm), and RunCam Link cameras (camera width 19mm). The analog version can be fitted with an analog FPV camera with a camera width of 19mm, such as the Caddex flathead, etc.
2. Can DJI's first generation FPV Air Unit be installed?
If you can't match your original DJI camera, you can replace it with a Caddex Vista or RunCam Link camera.
3. Does the C-20T gimbal need software settings?
The gimbal control interface has reserved 4 PWM signal inputs, including gimbal mode, gimbal sensitivity, pointing rotation control, and pitch rotation control, no need to set it in the software. In addition, the upright and upside installation of the gimbal does not require software settings, and after the gimbal is powered on, it will automatically determine the installation status and automatically switch between upright or inverted mode. However, if you need to switch the installation mode after that, you will need to power the gimbal back on.
4. What is gimbal sensitivity adjustment?
The sensitivity of the gimbal is the speed of the gimbal response in the mode of tracking the axis angle of the gimbal. When the sensitivity of the gimbal is lowered, the gimbal responds sluggishly to the shaking of the fuselage, and more fuselage shaking can be filtered out. When the sensitivity of the gimbal is increased, the gimbal responds sensitively to the shaking of the fuselage, and the gimbal filters out less fuselage shaking. The C-20T supports gimbal sensitivity, which can be adjusted in real time through the sensitivity PWM channel.
Examples of use cases:
The gimbal is mounted on a fixed-wing aircraft, and when taking off and landing, the sensitivity of the gimbal can be increased, and the gimbal response is sensitive, which is conducive to judging the fuselage attitude through the screen and facilitating the control of the aircraft. When cruising in the air, you can turn down the sensitivity of the gimbal so that the image doesn't shake much, making it easy to shoot silky smooth videos.
The gimbal is mounted on the remote control car, which can reduce the sensitivity of the gimbal, which is more conducive to the gimbal to filter out more body shaking.
5. After the gimbal is powered on, the picture is not level, and it is a little crooked, how to deal with it?
After the gimbal is powered on, the default working mode is follow mode. In this mode, the gimbal takes its own base as the coordinate system. If the gimbal base is not horizontal, the camera is not horizontal. When the gimbal switches the working mode to the roll lock mode, the earth is used as the coordinate system, and the camera remains horizontal.
6. When the plane disc rotates and bends, the picture is not level, how to deal with this?
When the aircraft or model car turns quickly or pans sideways, the gimbal roll axis will be offset at a certain angle, which is normal.
7. Is it normal for the gimbal to heat up on the surface after working for a period of time?
The gimbal IMU sensor has a constant temperature control, and there will be a certain amount of heat during normal operation, which will cause the surface of the gimbal body to heat up, which is normal.
8. Is the gimbal waterproof and dustproof?
The gimbal is not waterproof. If it rains or splashes water on the surface, it should be wiped clean in time to prevent water from entering the inside of the gimbal, resulting in the gimbal not working properly. The slight dust of the gimbal will not affect the use, but it should be avoided in places with a lot of fine sand and gravel to prevent sand and dust from entering the gimbal motor, causing the motor to fail to work normally, or the sand and dust on the surface of the gimbal should be blown off immediately after use.
9. When the gimbal is working stationary, the pointing axis slowly drifts and rotates, how to deal with this?
Use the software to recalibrate the gimbal gyroscope; how to calibrate it please refer to the gimbal manual.
10. Does the gimbal control interface support S.Bus?
Later support through firmware upgrades.
11. Does the PTZ control interface support the CRSF protocol?
Later support through firmware upgrades.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | O4 Lite Version |
| Brand | RunCam |
| Package Mefa | 2 x 1 x 0.2 inches |
| Iwọn Nkan | 0.48 iwon |
| Àwọ̀ | dudu |
| Pataki Awọn ẹya ara ẹrọ | Idojukọ-mọnamọna |
| Awọn ẹrọ ibaramu | FPV Camera systems (DJI O3, Walksnail Avatar, Moonlight, RunCam Link Wasp, 19mm analog cameras) |
| Iṣagbesori Iru | Ijoko Oke |
| Akọkọ Wa Ọjọ | Oṣu Kẹta Ọjọ 18, Ọdun 2025 |
Figure 9: Visual representation of the gimbal's compact size and lightweight design.
Atilẹyin ọja ati Support
Specific warranty details and direct support contact information are not available in this manual. For warranty claims, technical support, or further inquiries, please visit the official RunCam webaaye tabi kan si awọn olupin ti a fun ni aṣẹ.
You can typically find support resources, firmware updates, and additional documentation on the manufacturer's official product page.
Olupese: xf
Brand Webojula: Ile itaja RunCam lori Amazon
Awọn fidio ọja osise
No official product videos from the seller were found in the provided data. Please check the product listing on Amazon or the manufacturer's official website for any available video demonstrations or tutorials.
