1. Ifihan
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 6L Ultrasonic Cleaner. This device utilizes ultrasonic cavitation to thoroughly clean various items, offering both Degas and Gentle cleaning modes for optimal results. Please read this manual carefully before use and retain it for future reference.
2. Alaye Aabo
- Nigbagbogbo so ẹrọ pọ mọ iṣan agbara ti ilẹ.
- Má ṣe lo ohun èlò ìfọmọ́ láìsí omi nínú ojò náà.
- Ensure the power cord is not damaged and avoid pulling it to disconnect.
- Keep the unit away from water or other liquids to prevent electric shock.
- Ma ṣe fi ẹya akọkọ sinu omi.
- Yọọ kuro ṣaaju ṣiṣe tabi ṣiṣe itọju.
- Jeki kuro ni arọwọto awọn ọmọde.
- Lo àwọn omi ìwẹ̀nùmọ́ tí a gbani nímọ̀ràn nìkan. Yẹra fún àwọn omi tí ó lè jóná tàbí tí ó lè ba nǹkan jẹ́.
- Do not touch the tank or solution during operation, as it may become hot.
3. Package Awọn akoonu
Jẹrisi pe gbogbo awọn ohun kan wa ninu package:
- CREWORKS 6L Ultrasonic Cleaner Unit
- Stainless Steel Cleaning Basket
- Ideri
- Okun agbara
- 34 fl oz (1000 mL) CREWORKS Heavy Duty Cleaner & Degreaser Solution
- Afowoyi Olumulo (iwe-ipamọ yii)
4. Eto
- Ibi: Place the ultrasonic cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
- Kun ojò: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the 'MIN' and 'MAX' marks. For general cleaning, use water. For enhanced cleaning, use the provided CREWORKS Heavy Duty Cleaner & Degreaser solution diluted at a 1:10 ratio with water.
- Fi Agbọn sii: Gbe agbọn mimọ sinu ojò.
- So agbara: Plug the power cord into the unit's power inlet, then connect it to a grounded electrical outlet.
5. Awọn ilana Iṣiṣẹ
The CREWORKS 6L Ultrasonic Cleaner features intuitive controls for temperature, time, and cleaning modes.
- Agbara Tan: Turn the main power switch to the 'ON' position. The digital display will illuminate.
- Ṣeto iwọn otutu: Use the 'TEMP' knob to set the desired cleaning temperature. The temperature range is 70-210°F (20-100°C). Heating helps improve cleaning efficiency, especially for stubborn grime.
- Ṣeto Aago: Use the 'TIME' knob to set the cleaning duration. The timer can be set from 1 to 30 minutes. For delicate items, start with a shorter duration.
- Yan Ipo Mimọ:
- Degas Mode: Press the 'DEGAS' button. This mode removes dissolved gases from the cleaning solution, which can improve ultrasonic efficiency and prevent oxidation of cleaned objects. It is recommended to run a degas cycle for a few minutes when using fresh solution.
- Ipo onirẹlẹ: Press the 'GENTLE' button. This mode reduces the ultrasonic intensity, providing a softer cleaning action suitable for delicate or sensitive items that might be damaged by full power cavitation.
- Bẹrẹ Isọmọ: Once temperature, time, and mode are set, press the 'ON/OFF' button to start the ultrasonic cleaning process. The unit will automatically stop when the timer expires.
- Lẹhin Isọgbẹ: Turn off the unit, unplug it, and carefully remove the cleaning basket. Rinse the cleaned items with clean water and dry them thoroughly.
6. Lilo ojutu CREWORKS Heavy Duty Cleaner & Degreaser
The included 34 fl oz CREWORKS Heavy Duty Cleaner & Degreaser solution is designed to enhance the cleaning power of your ultrasonic cleaner, particularly for stubborn grease, oil, and grime.
- Dilution: This is a concentrated solution. Dilute it with water at a 1:10 ratio (1 part solution to 10 parts water) before adding it to the ultrasonic cleaner tank.
- Awọn ohun elo: Ideal for cleaning engine parts, carburetors, gun parts, electronic components, bicycle chains, metals, and plastics. It effectively removes grease buildup, persistent residues, tight corner grime, and stubborn stains.
- Ibamu: Safe for use with most metals, alloys, and plastics. Always test on an inconspicuous area first if unsure.
7. Itọju ati Cleaning
- Sisọ tanki naa: After each use, especially with cleaning solutions, drain the tank. Use the drain valve located on the side of the unit to empty the liquid into a suitable container.
- Ninu ojò naa: Rinse the stainless steel tank with clean water. Wipe the interior and exterior of the unit with a soft, damp asọ. Ma ṣe lo awọn afọmọ abrasive tabi fi ibọmi apakan akọkọ sinu omi.
- Ibi ipamọ: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Unit ko ni agbara lori | No power supply; Power cord loose; Main switch off | Check power outlet; Ensure power cord is securely plugged in; Turn main switch to 'ON' |
| Iṣẹ Ultrasonic ko ṣiṣẹ | No liquid in tank; Timer not set; Unit overheated | Fill tank with liquid; Set timer; Allow unit to cool down |
| Awọn abajade mimọ ti ko dara | Incorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tank; Degas cycle not performed | Use appropriate solution (e.g., CREWORKS Degreaser); Increase time/temperature; Do not overload; Run a degas cycle for fresh solution |
| Solution not heating | Heater not activated; Temperature set too low | Ensure temperature knob is set above ambient; Allow time for heating |
9. Awọn pato
- Awoṣe: CREWORKS 6L Ultrasonic Cleaner
- Agbara ojò: 6 liters
- Agbara Ultrasonic: 180W
- Agbara alapapo: 300W
- Igbohunsafẹfẹ Ultrasonic: 40 kHz
- Iṣakoso iwọn otutu: 70-210°F (20-100°C)
- Iṣakoso Aago: 1-30 iṣẹju
- Awọn ọna: Degas, Gentle
- Ojutu Mimọ: CREWORKS Heavy Duty Cleaner & Degreaser (34 fl oz)
- ASIN: B0DYJCGRNQ
- Ọjọ Akọkọ Wa: Oṣu Kẹta Ọjọ 26, Ọdun 2025
10. Atilẹyin ọja ati Support
For warranty information, technical support, or service inquiries, please refer to the official CREWORKS webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.
