Ausom Gallop SR1 Electric Scooter User Manual

1. Alaye Aabo pataki

Always prioritize safety when operating the Ausom Gallop SR1 Electric Scooter. Read this manual thoroughly before first use. Failure to follow safety guidelines can result in serious injury or property damage.

• Always wear a helmet and appropriate safety gear (knee pads, elbow pads, gloves).
• Maṣe gun ni awọn ipo tutu, ojo nla, tabi nipasẹ awọn adagun.
• Rí i dájú pé gbogbo àwọn bulọ́ọ̀tì àti àwọn ìtújáde kíákíá ni a ti mú dáadáa kí a tó bẹ̀rẹ̀ ìrìn àjò kọ̀ọ̀kan.
• Adhere to local laws and regulations regarding electric scooter use.
• Maṣe kọja opin iwuwo ti o pọju ti 143 poun (65 kg).
• Avoid riding on steep inclines or uneven terrain that exceeds the scooter's capabilities.

2. Ọja Ipariview

The Ausom Gallop SR1 is a high-performance electric scooter designed for adults, featuring dual 1000W motors for powerful acceleration and a top speed of up to 41 mph. It boasts a robust aluminum alloy frame, 10"x3" off-road tires, and dual suspension for a stable and comfortable ride across various terrains. Key features include an integrated security system with NFC unlock, a comprehensive lighting system with turn signals, and a smart LCD screen for real-time information and mode control.

Figure 2.1: Ausom Gallop SR1 Electric Scooter in unfolded and folded states.

Figure 2.2: Dual 1000W motors provide powerful acceleration and a 46% climb angle.

Figure 2.3: The 20.8Ah battery offers a cruising range of up to 54 miles.

Figure 2.4: Innovative swingarm suspension ensures a smooth ride over bumpy roads.

3. Package Awọn akoonu

Upon unboxing your Ausom Gallop SR1 Electric Scooter, please verify that all components are present:

• Ausom Gallop SR1 Electric Scooter (folded)
• Itọsọna olumulo
• Adapter agbara
• Okun agbara
• Irinṣẹ Apo
• Motor Nut Caps (4 pieces)
• Reflectors (2 pieces)
• NFC Card (for unlocking)

4. Apejọ Awọn ilana

Follow these steps to assemble your Ausom Gallop SR1 Electric Scooter:

1. Step 1: Unfold the Stem
   Open the kickstand to make the scooter stand upright. Carefully unfold the stem until it locks into place.
2. Step 2: Loosen Locking Screw
   Turn the locking screw counter-clockwise to loosen it, preparing the folding mechanism.
3. Step 3: Secure Folding Mechanism
   Fit the hook into the slot and push up the folding mechanism until it is attached to the stem.
4. Step 4: Tighten Locking Screw
   Turn the locking screw clockwise to securely fasten the folding mechanism.
5. Igbesẹ 5: So Ọpa Handle
   Place the handlebar onto the clip at the top of the stem. Ensure the clip is centered on the handlebar.
6. Step 6: Secure Display
   Place the display unit onto the handlebar and secure it with the four M5 screws provided in the tool kit.
7. Step 7: Attach Reflectors
   Peel off the adhesive strip covers from the reflectors and stick them firmly onto the swingarms as shown in the video.
8. Step 8: Install Motor Nut Caps
   Place the motor nut caps onto the motor nuts on both wheels.

5. Awọn ilana Iṣiṣẹ

Familiarize yourself with the controls and functions of your scooter for optimal performance and safety.

5.1 Tan/Pa ati Ṣiṣi silẹ

• Agbara Tan: Press and hold the power button on the display until it illuminates.
• Ṣii silẹ: The scooter will be in Park mode upon startup. To unlock, tap the provided NFC card or your NFC-enabled phone against the NFC detection area on the display.
• Exiting Park Mode: Short press the Plus button on the display to exit Park mode.

5.2 Awọn ipo iyara

The scooter features three speed levels: Eco, Sport, and Race. Short press the Plus (+) or Minus (-) buttons on the display to cycle through these speed levels.

5.3 ina System

• Ambient Lights: Press the light switch twice to turn the ambient lights on or off.
• Imọlẹ iwaju: Long press the light switch for 3 seconds to turn the headlight on or off.
• Yipada Awọn ifihan agbara: Push the turn signal switch to the left to activate the left turn signal, and to the right for the right turn signal.

5.4 Horn and Motor Modes

• Ìwo: Tẹ bọtini iwo lati dun iwo naa.
• Awọn ọna mọto: Short press the DDM button to switch between single-motor and dual-motor modes.

5.5 Power Bank Išė

The scooter is equipped with USB-A and USB-C outputs, allowing you to charge your mobile phone and other devices directly from the scooter.

6. Itọju

Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti ẹlẹsẹ rẹ.

• Ninu: Pa ẹlẹsẹ-awọ kuro pẹlu ipolowoamp cloth after each use. Avoid using high-pressure water jets.
• Taya: Regularly check tire pressure (pneumatic tires) and inspect for wear or damage. Maintain recommended pressure for optimal performance and safety.
• Awọn idaduro: Periodically check the hydraulic disc brakes for proper function and wear. Adjust or replace brake pads as needed.
• Ọna kika: Keep the folding mechanism clean and lubricated to ensure smooth operation.
• Batiri: Store the scooter in a cool, dry place. If storing for extended periods, charge the battery to approximately 50-70% and recharge every 30-60 days to prevent deep discharge.
• Ayẹwo gbogbogbo: Regularly inspect all screws, bolts, and connections for tightness.

7. Laasigbotitusita

If you encounter issues with your scooter, refer to these common troubleshooting tips:

• Skútà kò tan: Check battery level. Ensure the power button is pressed correctly.
• Scooter not unlocking with NFC: Ensure NFC is enabled on your phone (refer to Video 5.2). Try repositioning the phone/card on the display.
• Agbára/ìwọ̀n tí ó dínkù: Check tire pressure. Ensure battery is fully charged. Riding conditions (hills, rider weight, temperature) can affect performance.
• Àwọn bírékì tí kò dáhùn: Inspect brake cables and calipers. Adjust or seek professional assistance if needed.
• Awọn ariwo ti ko wọpọ: Stop riding immediately and inspect the scooter for loose parts or damage.

For persistent issues not covered here, please contact Ausom customer support.

8. Awọn pato

9. Atilẹyin ọja ati Support

The Ausom Gallop SR1 Electric Scooter comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, replacement parts, or any inquiries not covered in this manual, please contact Ausom customer service through their official webaaye tabi alagbata ti o ti ra ọja naa.