1. Ifihan
Thank you for choosing the OREiN OL17006 Bathroom Exhaust Fan with Light. This product is designed to enhance air quality and illumination in your bathroom, laundry room, or similar indoor spaces. It features a humidity sensor, adjustable airflow (CFM), a multi-color temperature LED light, and a nightlight function. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.
Image 1.1: The OREiN OL17006 Bathroom Exhaust Fan with Light, showcasing awọn oniwe-aso oniru ati ese ina.
2. Alaye Aabo
Nigbagbogbo tẹle awọn iṣọra aabo ipilẹ nigba fifi sori ẹrọ, ṣiṣẹ, ati mimu ọja yii ku lati dinku eewu ina, mọnamọna, tabi ipalara si eniyan.
- Ka gbogbo awọn ilana: Familiarize yourself with the product and its functions before use.
- Aabo Itanna: Disconnect power at the service panel before wiring or servicing the unit. Ensure all wiring complies with local electrical codes and standards.
- Oṣiṣẹ ti o peye: Installation and wiring should be performed by a qualified electrician.
- Ilẹ: Ẹyọ yii gbọdọ wa ni ilẹ daradara.
- Afẹfẹ: Do not use this fan in kitchens or areas where it may be exposed to grease.
- Iyọkuro: Maintain proper clearance from combustible materials.
- Bibajẹ: Do not operate any fan with a damaged cord or plug, or if the fan motor is dropped or damaged in any manner.
3. Package Awọn akoonu
Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- OREiN OL17006 Olufẹ eefi ti yara iwẹ pẹlu ina
- Fast Bracket for Installation
- Iwe afọwọkọ olumulo (iwe yii)
- Àwọn ohun èlò ìfipamọ́ (àwọn skru, àwọn wáyà, àti bẹ́ẹ̀ bẹ́ẹ̀ lọ)
4. Awọn pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Brand | OREiN |
| Orukọ awoṣe | OL17006 |
| Air Sisan Agbara | 80 / 110 Cubic Feet Per Minute (CFM) selectable |
| Ariwo Ipele | 0.8 / 1.0 Sones |
| Wattage | 30 watts (Fan) |
| Voltage | 120 Volts |
| Ijade ina | 1500 lumen |
| Iwọn otutu awọ | 3000K (Soft White), 4000K (Bright White), 5000K (Daylight) selectable |
| Imọlẹ alẹ | 2200K |
| Pataki Awọn ẹya ara ẹrọ | Humidity Sensor, Adjustable Color Temperature, LED Light |
| Ipin Opin | 4 inches |
| Awọn iwọn Housing | 9.25" x 9.75" x 7.1" |
| Install Size | 10.24" x 9.37" (260 x 238 mm) |
| Light Cover Size | 13" x 13" |
| Yara Iru | Bathroom, Laundry Room |
5. Eto ati fifi sori
The OREiN OL17006 fan is designed for easy installation in new construction or retrofit applications. It fits 10.24" x 9.37" ceiling constructions with a 4-inch duct.
5.1 Pre-Fifi Igbesẹ
- Ge asopọ agbara: Ensure power is turned OFF at the circuit breaker before starting any installation work.
- Aṣayan Ibi: Choose a suitable location in the ceiling, ensuring adequate space for the fan housing and ductwork.
- Ṣiṣan silẹ: Plan for a 4-inch duct connection to the exterior.
5.2 Ilana fifi sori ẹrọ
The fan comes with a fast bracket for secure and easy installation. You can mount the exhaust fan between ceiling joists using the fast bracket, or nail/screw it directly to a joist.
- Gbigbe Ile naa: Secure the fan housing to the ceiling joists using the provided fast bracket or by nailing/screwing directly. Ensure the housing is level and firmly attached.
- Isopọ ọna opopona: Connect the 4-inch ductwork to the fan's exhaust port. Seal all duct connections with appropriate tape or sealant to prevent air leakage.
- Asopọmọra Itanna: Connect the electrical wiring according to the wiring diagram provided with the unit and local electrical codes. Ensure proper grounding.
- Light Cover Installation: Once wiring is complete and tested, attach the light cover to the fan housing.
Image 5.1: Diagram illustrating the product dimensions, installation size (10.24" x 9.37"), and the fast bracket for mounting.
6. Awọn ilana Iṣiṣẹ
The OREiN OL17006 fan offers versatile operation modes and lighting options.
6.1 CFM Selection (Airflow Speed)
You can select between 80 CFM and 110 CFM airflow speeds to suit your ventilation needs. This is done by sliding a toggle switch located on the fan housing before final installation of the light cover.
Image 6.1: Illustration of the toggle switch on the fan housing used to select between 80 CFM and 110 CFM airflow settings.
6.2 Light Color Temperature (CCT) Selection
The integrated LED light offers three color temperature options: 3000K (Soft White), 4000K (Bright White), and 5000K (Daylight). To select your desired CCT, slide the toggle switch located on the back of the bath fan shade before installing it.
Image 6.2: Visual guide for selecting the LED light's color temperature (3000K, 4000K, 5000K) using the switch on the lampiboji.
6.3 Nightlight Iṣẹ
The fan includes a 2200K nightlight. To activate the nightlight mode, cycle the wall switch of the light from OFF to ON-OFF-ON within 2 seconds. This quick sequence will switch the light to nightlight mode.
Aworan 6.3: Example of the 2200K nightlight providing subtle illumination in a bathroom setting.
6.4 Humidity Sensing Mode
The built-in humidity sensor automatically turns the fan on when the humidity level in the room exceeds 60%. The LED indicator light on the back of the fan will be green when in humidity sensing mode.
To switch between Manual Mode (fan runs continuously) and Humidity Sensing Mode, cycle the wall switch of the fan to the "OFF" position and then back to the "ON" position. The fan will indicate the current mode by the color of its indicator light.
Image 6.4: Explanation of Manual Mode (red indicator, continuous operation) and Humidity Sensing Mode (green indicator, automatic activation at 60% humidity).
7. Itọju
Itọju deede ṣe idaniloju iṣẹ ti o dara julọ ati igbesi aye gigun ti afẹfẹ eefi rẹ.
- Ge asopọ agbara: Always turn off power at the circuit breaker before performing any maintenance.
- Cleaning the Grille/Light Cover: Remove the light cover and wash it with mild soap and water. Rinse thoroughly and dry completely before reattaching.
- Fífọ Àwọn Abẹ́ Fáàn: rọra nu awọn abẹfẹlẹ afẹfẹ pẹlu ipolowoamp asọ lati yọ eruku ati idoti. Maṣe tẹ awọn abẹfẹlẹ naa.
- Itoju mọto: The motor is permanently lubricated and requires no additional oiling.
- Ayewo ductwork: Periodically check ductwork for obstructions or damage.
8. Laasigbotitusita
If you encounter issues with your OREiN OL17006 fan, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Fan ko ṣiṣẹ | Ko si ipese agbara Alailowaya onirin Aṣiṣe mọto | Ṣayẹwo Circuit fifọ ati odi yipada Verify all wire connections are secure (ensure power is off) Kan si atilẹyin alabara |
| Imọlẹ ko tan | Ko si ipese agbara Alailowaya onirin LED ikuna | Ṣayẹwo Circuit fifọ ati odi yipada Verify all wire connections are secure (ensure power is off) Kan si atilẹyin alabara |
| Fan jẹ alariwo | Iṣagbesori alaimuṣinṣin Duct obstruction Idọti àìpẹ abe Motor oro | Ensure fan housing is securely mounted Check ductwork for debris Clean fan blades (ensure power is off) Kan si atilẹyin alabara |
| Humidity sensor not activating | Ipo ti ko tọ ti yan Humidity level below 60% Aṣiṣe sensọ | Cycle wall switch to switch to Humidity Sensing Mode Ensure room humidity is above 60% Kan si atilẹyin alabara |
| Nightlight not activating | Incorrect switch sequence | Ensure ON-OFF-ON sequence is performed within 2 seconds |
9. Atilẹyin ọja ati Support
OREiN products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the warranty card included with your product or contact OREiN customer service directly.
9.1 Onibara Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact OREiN customer support:
- Foonu: 1 (844) 506-1530 (24-Hour Service)
- Lori ayelujara: Visit the OREiN store on Amazon or search for OREiN on the internet to find contact options.
Image 9.1: OREiN customer service contact details, including a 24-hour service phone number.
