GDFStudio Full Size Floor Platform Bed with Fence and Door - Instruction Manual

1. Ifihan

Thank you for choosing the GDFStudio Full Size Floor Platform Bed with Fence and Door. This manual provides detailed instructions for the assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Alaye Aabo

• Apejọ Agba Nilo: This product must be assembled by adults. Keep children away during assembly.
• Ka Awọn ilana: Ensure all instructions are read and understood before assembly and use.
• Ṣayẹwo Gbogbo Awọn ẹya: Verify that all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Use on Level Surface: Assemble and use the bed on a flat, stable, and level surface to prevent tipping.
• Mu Awọn ohun elo Mu: Periodically check and tighten all fasteners to ensure the bed remains stable. Do not overtighten.
• Opin iwuwo: Do not exceed the recommended weight limit for a full-size bed frame.
• Ko si Orisun omi apoti ti a nilo: This platform bed is designed for use without a box spring. Using a box spring may raise the mattress height excessively.

3. Package Awọn akoonu

Before assembly, please ensure all components listed below are present in your package. If any parts are missing or damaged, please contact customer support.

Image: Detailed diagram illustrating all components and their respective dimensions for the bed frame.

Akojọ Awọn eroja:

• Headboard/Footboard Panels
• Side Rails with Fence
• Ibi iwaju alabu
• Awọn atilẹyin Slats
• Center Support Legs (if applicable)
• Apo Hardware (awọn skru, awọn boluti, Wrench Allen)
• Ilana itọnisọna

4. Eto ati Apejọ

Follow these steps carefully for a smooth assembly process. It is recommended to assemble the bed with two adults.

1. Yọ awọn ohun elo kuro: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (like a carpet) to prevent scratches.
2. Kó àwọn irin ẹ̀gbẹ́ jọ: Attach the side rails to the headboard and footboard panels using the provided hardware. Ensure all connections are secure but do not fully tighten until the frame is complete.
3. Install Door: Attach the door panel to the designated opening on the side rail using the hinges and latch provided. Ensure the door swings freely and latches securely.


Image: Detail of the door's hinge and latch for secure closure.

4. Place Support Slats: Lay the wooden support slats across the bed frame. Ensure they are evenly spaced and secured to the side rails as per the instructions. These slats provide mattress support and eliminate the need for a box spring.


Aworan: View of the sturdy wooden slats providing mattress support.

5. Imuduro ipari: Once all parts are assembled, go back and fully tighten all screws and bolts. Do not overtighten to avoid damaging the wood.
6. Ibùsùn Ipò: Fi pẹ̀lẹ́pẹ̀lẹ́ gbé férémù ibùsùn tí a kó jọ sí ibi tí ó fẹ́.

5. Awọn ilana Iṣiṣẹ

This floor platform bed is designed for direct mattress placement. No box spring is required. The integrated fence and door provide a secure and enclosed sleeping area.

• Gbigbe akete: Place your full-size mattress directly onto the wooden support slats.
• Iṣẹ́ Ilẹ̀kùn: The small door allows for easy entry and exit. Ensure the latch is properly engaged when the door is closed to keep it secure.
• Pro kekerefile Apẹrẹ: The low height of the bed makes it easily accessible.

Image: The assembled bed frame with a mattress and decorative items, showcasing awọn oniwe-kekere-profile design and fence.

6. Itọju

• Ninu: Wipe the wood frame with a soft, damp asọ. Yẹra fun awọn kẹmika lile tabi awọn olutọpa abrasive ti o le ba ipari jẹ.
• Ayẹwo igbagbogbo: Máa ṣàyẹ̀wò gbogbo àwọn ṣẹ́kẹ́ẹ̀tì àti ìkọ́kọ́ láti rí i dájú pé wọ́n lẹ̀ mọ́ra. Mú wọn le tí ó bá pọndandan.
• Yago fun Ọrinrin: Keep the bed away from excessive moisture or direct sunlight to prevent warping or fading of the wood.

7. Laasigbotitusita

Awọn oran ti o wọpọ ati Awọn ojutu:

• Ibùsùn náà ń mì tìtì: Ensure all bolts and screws are fully tightened. Check that the bed is on a level surface.
• Slats are not fitting: Double-check that the side rails are correctly installed and that the slats are oriented properly.
• Ilekun ko tii daradara: Inspect hinges and latch for any obstructions or misalignment. Adjust if needed.

8. Awọn pato

9. Atilẹyin ọja ati Support

GDFStudio products are manufactured with quality and care. For any questions regarding assembly, missing parts, or product defects, please contact GDFStudio customer support. Please have your model number (326331W) and purchase information ready when contacting support.

For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official GDFStudio webojula.