CREWORKS 10L Ultrasonic Cleaner User Manual

1. Ifihan

This manual provides essential information for the safe and effective operation of your CREWORKS 10L Ultrasonic Cleaner. This machine is designed for thorough cleaning of various items such as lab tools, glasses, jewelry, auto parts, and more, utilizing ultrasonic cavitation and heating capabilities.

Please read this manual carefully before initial use and retain it for future reference.

2. Alaye Aabo

Observe the following safety precautions to prevent injury or damage to the unit:

• Maṣe ṣajọpọ: Unauthorized disassembly may void the warranty and pose electrical hazards.
• Always use sufficient fluid: Ensure the tank is filled to the recommended level before operation to prevent damage to the ultrasonic transducers.
• Avoid flammable liquids: Never use flammable, explosive, or corrosive liquids in the tank.
• Yọọ kuro nigbati ko si ni lilo: Disconnect the power cord from the outlet when the unit is not in use or before cleaning.
• Afẹfẹ ti o tọ: Rii daju pe fentilesonu to peye ni ayika ẹyọ naa lakoko iṣẹ.
• Jeki gbẹ: Do not immerse the main unit in water or other liquids. Avoid splashing water onto the control panel.

Aworan: Iwaju view of the CREWORKS 10L Ultrasonic Cleaner, showing the control panel and a yellow warning label on the lid.

3. Irinše ati Awọn ẹya ara ẹrọ

Your CREWORKS 10L Ultrasonic Cleaner includes the following main components:

• Ultrasonic Cleaner Unit (main body with tank)
• Basket (for holding items during cleaning)
• Okun agbara
• Water Pipe (drain valve attachment)

Awọn ẹya pataki pẹlu:

• 10L (2.6 Gallon) Capacity: Large stainless steel tank for various items.
• 240W Ultrasonic Power: Generates 40kHz sound waves for effective cavitation.
• 300W Heating Power: Adjustable temperature from 70 to 175°F (20-80°C) for enhanced cleaning.
• Iṣakoso Aago: Adjustable cleaning cycles up to 30 minutes.
• Ikole ti o tọ: Stainless steel tank (304 grade) and exterior (201 grade).
• Isẹ idakẹjẹ: Extra-thick tank wall for noise reduction (below 60 dB).
• Apẹrẹ Iduroṣinṣin: Non-skid rubber feet for secure placement.

Aworan: Pariview of key features including control knobs, stainless steel construction, fuses, and dissipation holes.

Aworan: inu view of the stainless steel tank, highlighting the 304 food-grade stainless steel construction.

4. Eto

1. Yọọ kuro: Carefully remove all components from the packaging. Inspect the unit for any signs of damage.
2. Ibi: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
3. Connect Drain Valve (if applicable): Attach the provided water pipe to the drain valve on the side of the unit if you plan to use it for draining.
4. Kun Ojò: Fill the stainless steel tank with the appropriate cleaning solution (water, or water with a suitable ultrasonic cleaning concentrate) up to the recommended fill line. Do not overfill or underfill. Ensure the items to be cleaned are fully submerged.
5. Fi Agbọn sii: Gbe agbọn mimọ sinu ojò.
6. So agbara: Pulọọgi okun agbara sinu iṣan itanna ti ilẹ.

5. Awọn ilana Iṣiṣẹ

Follow these steps to operate your ultrasonic cleaner:

1. Ṣetan Awọn nkan: Place the items to be cleaned into the cleaning basket. Ensure items are not touching each other if possible, and are fully submerged in the cleaning solution.
2. Ideri pipade: Close the lid of the ultrasonic cleaner.
3. Ṣeto Iwọn otutu (Aṣayan): If heating is desired, turn the "TEMPERATURE" knob to select the desired temperature between 70°F and 175°F (20°C and 80°C). The heating indicator light will illuminate. Allow time for the solution to reach the set temperature.
4. Ṣeto Akoko Isọgbẹ: Turn the "TIME" knob to select the desired cleaning duration, up to 30 minutes. The cleaning indicator light will illuminate, and the ultrasonic cleaning process will begin.
5. Ilana Atẹle: The unit will operate for the set time. You may hear a slight buzzing sound, which is normal during ultrasonic operation.
6. Ipari: Once the set time has elapsed, the unit will automatically stop. The indicator lights will turn off.
7. Yọ Awọn nkan kuro: Carefully open the lid and remove the cleaning basket with the cleaned items. Rinse items thoroughly with clean water if necessary and dry them.
8. Ojutu Sisan: After cleaning, it is recommended to drain the used cleaning solution. Place a suitable container under the drain valve and open the valve to empty the tank. Close the valve once empty.

Image: Illustration of how ultrasonic cavitation works to clean items by forming and bursting microscopic bubbles.

Aworan: Examples of items suitable for cleaning with the ultrasonic cleaner, such as glasses, machine parts, and tools.

6. Itọju

Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner:

• Empty and Clean Tank: After each use, especially if using cleaning solutions other than water, drain the tank completely. Rinse the tank interior with clean water and wipe it dry with a soft cloth. Do not use abrasive cleaners or scourers.
• Ode Ninu: Mu ese ita kuro pẹlu ipolowoamp asọ. Maṣe lo awọn kemikali lile.
• Ibi ipamọ: Tọju ẹyọ naa ni itura, aye gbigbẹ nigbati ko si ni lilo.
• Rirọpo Fuse: The unit is equipped with protective fuses. If the unit fails to power on, check and replace the fuses if necessary. Refer to the specifications for fuse type.

7. Laasigbotitusita

If you encounter issues with your ultrasonic cleaner, refer to the following common problems and solutions:

• Ẹka ko ni agbara lori:
  • Ṣayẹwo boya okun agbara ti wa ni edidi ni aabo sinu iṣan itanna ti n ṣiṣẹ.
  • Rii daju pe iyipada agbara wa ni ipo "ON".
  • Check the fuses. Replace if blown.
• No ultrasonic action (no buzzing sound):
  • Ensure the tank is filled with sufficient liquid.
  • Check if the timer is set and the unit is powered on.
  • Kan si atilẹyin alabara ti ọrọ naa ba wa.
• Cleaning results are unsatisfactory:
  • Ensure the cleaning solution is appropriate for the items being cleaned.
  • Mu akoko mimọ pọ si.
  • Consider using heat to improve cleaning effectiveness.
  • Ensure items are not overcrowded in the basket.

8. Awọn pato

Image: Dimensional drawing of the ultrasonic cleaner and its basket.

9. Atilẹyin ọja ati Support

For warranty information or technical support, please contact CREWORKS customer service. Keep your purchase receipt and model number (JX-040) handy when contacting support.

You can find contact information on the official CREWORKS webojula tabi nipasẹ rẹ ojuami ti o ra.