1. Awọn Ilana Aabo pataki
Always observe the following safety precautions when operating the Einhell TC-RH 1600 rotary hammer drill to prevent electric shock, injury, and fire. Keep these instructions for future reference.
Gbogbogbo Aabo Ọpa Agbara
- Aabo Agbegbe Iṣẹ: Jeki agbegbe iṣẹ rẹ mọ ki o si tan daradara. Awọn agbegbe idamu tabi awọn agbegbe dudu n pe awọn ijamba. Ma ṣe ṣiṣẹ awọn irinṣẹ agbara ni awọn bugbamu bugbamu, gẹgẹbi niwaju awọn olomi ina, gaasi, tabi eruku.
- Aabo Itanna: Awọn pilogi irinṣẹ agbara gbọdọ baramu iṣan. Maṣe yi plug naa pada ni ọna eyikeyi. Yago fun olubasọrọ ara pẹlu ilẹ tabi ilẹ roboto bi paipu, imooru, awọn sakani, ati firiji.
- Aabo ti ara ẹni: Always wear eye protection, hearing protection, and a dust mask. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert, watch what you are doing, and use common sense.
- Lilo ati Itọju: Maṣe fi agbara mu ohun elo agbara. Lo ohun elo agbara ti o pe fun ohun elo rẹ. Ge asopọ plug lati orisun agbara ṣaaju ṣiṣe eyikeyi awọn atunṣe, yiyipada awọn ẹya ẹrọ, tabi titoju awọn irinṣẹ agbara.
Rotary Hammer Specific Safety
- Wọ awọn aabo eti when impact drilling. Exposure to noise can cause hearing loss.
- Use auxiliary handles supplied with the tool. Loss of control can result in personal injury.
- Mu ohun elo agbara mu nipasẹ awọn aaye didan ti o ya sọtọ nigbati o ba n ṣiṣẹ ni ibi ti ẹya ẹrọ gige kan le kan si okun waya ti o farapamọ tabi okun tirẹ.
- Ṣe aabo ohun elo iṣẹ. Lo clamps tabi a vise lati mu awọn workpiece. Eyi jẹ ailewu ju lilo ọwọ rẹ lọ ati pe o gba ọwọ mejeeji laaye lati ṣiṣẹ ọpa naa.
- Beware of dust. Drilling or chiseling concrete and masonry can create dust containing silica, which can cause respiratory diseases. Use dust extraction and wear a suitable dust mask.
2. Ọja Ipariview and Included Items
The Einhell TC-RH 1600 is a powerful rotary hammer drill designed for drilling, impact drilling, and chiseling in concrete, masonry, and other tough materials. It features an SDS-plus chuck for quick tool changes and a robust pneumatic impact mechanism.
Image 2.1: The Einhell TC-RH 1600 rotary hammer drill shown with its robust carrying case. The drill features a red and black housing with an auxiliary handle attached.
Awọn nkan to wa:
- Einhell TC-RH 1600 Rotari Hammer Drill
- Oluranlọwọ Handle
- Ijinle Duro
- Ọran gbigbe
- 7-piece SDS-plus Drill Bit Set (2x 6mm, 2x 8mm, 10mm, 12mm, 14mm)
Image 2.2: A 7-piece SDS-plus drill bit set, including various diameters for concrete and reinforced concrete applications. The bits feature carbide tips for durability.
3. Imọ ni pato
| Ẹya ara ẹrọ | Sipesifikesonu |
|---|---|
| Awoṣe | TC-RH 1600 |
| Agbara Input | 1600 W |
| Voltage | 240 V |
| Agbara Ipa | 4 J |
| Iru Chuck | SDS-plus |
| Awọn iṣẹ | Drilling, Impact Drilling, Chiseling (with/without lock) |
| Aabo Ẹya | Overload safety clutch |
| Ilana Ipa | Pneumatic |
| Iṣakoso iyara | Electronic speed adjustment |
| Gbigbọn Damping | Gbigbọn-damped main handle |
| Jia Housing | Aluminiomu to lagbara |
4. Eto
4.1 So Imudani Iranlọwọ
The auxiliary handle provides better control and safety during operation. Loosen the auxiliary handle by turning it counter-clockwise. Slide it over the chuck and position it to your desired angle. Tighten it securely by turning clockwise.
4.2 Inserting/Removing SDS-plus Tools
- Ninu: Clean the shank of the SDS-plus tool and apply a thin layer of grease.
- Fi sii: Push the tool into the SDS-plus chuck while rotating it slightly until it locks into place. Pull the tool to check if it is securely seated.
- Yiyọ: Pull back the locking sleeve on the chuck and pull the tool out.
Akiyesi: The SDS-plus system allows for axial movement of the tool, which is normal and necessary for the impact mechanism.
4.3 Ṣíṣeto Iduro Ijinle naa
Insert the depth stop into the designated hole on the auxiliary handle. Adjust the depth stop to the desired drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.
5. Awọn ilana Iṣiṣẹ
5.1 Yiyan Ipo Ṣiṣẹ
The TC-RH 1600 offers four functions, selected via a rotary switch:
- Liluho: For drilling in wood, metal, or plastic without impact.
- Impact Drilling: Fun liluho ni nja, masonry, ati okuta pẹlu ipa.
- Chiseling (with lock): For chiseling applications where the chisel position needs to be fixed.
- Chiseling (without lock): For chiseling applications allowing free rotation of the chisel for easier positioning.
Iṣọra: Always ensure the tool is unplugged before changing the operating mode.
5.2 Bibẹrẹ ati Duro Ọpa naa
- Lati bẹrẹ: Tẹ ON/PA yipada.
- Lati Duro: Release the ON/OFF switch. For continuous operation, press the ON/OFF switch and then the lock-on button. To release, press the ON/OFF switch again.
5.3 iyara Iṣakoso
The tool features electronic speed control. The speed can be adjusted by varying the pressure on the ON/OFF switch. Lighter pressure results in lower speed, while full pressure provides maximum speed. This allows for fine adjustment during delicate work.
6. Itọju ati Cleaning
Regular maintenance ensures the longevity and optimal performance of your Einhell TC-RH 1600 rotary hammer drill. Always unplug the tool from the power supply before performing any maintenance or cleaning.
6.1 Gbogbogbo Cleaning
- Keep all safety devices, air vents, and the motor housing free of dirt and dust. Wipe the tool with a clean cloth.
- Do not use aggressive cleaning agents or solvents, as these can damage plastic parts.
- Clean the SDS-plus chuck regularly and apply a thin layer of grease to the moving parts to ensure smooth operation.
6.2 Erogba fẹlẹ Ayewo
The carbon brushes are subject to wear. If the motor sparks excessively or the tool stops working, the carbon brushes may need inspection or replacement. This should ideally be performed by a qualified technician.
6.3 Ibi ipamọ
Store the tool and its accessories in the provided carrying case in a dry, frost-free place, out of reach of children. Ensure the tool is clean before storage.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Irinṣẹ ko bẹrẹ. | Kò sí ìpèsè agbára; ìyípadà tí ó ní àbùkù; àwọn búrọ́ọ̀ṣì erogba tí ó ti gbó. | Check power connection; have switch or carbon brushes checked by a qualified technician. |
| Low impact power. | Incorrect operating mode; worn impact mechanism. | Ensure correct mode (impact drilling/chiseling) is selected; contact service for inspection. |
| Gbigbọn ti o pọju. | Damaged accessory; internal fault. | Check accessory for damage and replace if necessary; contact service. |
| Ọpa overheats. | Àpọ̀jù; àwọn ihò afẹ́fẹ́ tí a ti dí. | Reduce load; clean ventilation slots; allow tool to cool down. |
For problems not listed here or if solutions do not resolve the issue, please contact Einhell customer service or an authorized service center.
8. Atilẹyin ọja ati Support
Einhell products are manufactured with care and undergo strict quality controls. This product is covered by a manufacturer's warranty in accordance with country-specific regulations. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell webojula fun alaye olubasọrọ.
Awọn orisun Ayelujara: www.einhell.com
