BBLD 9301-1E

BBLD 1/18 Scale RC Car (Model 9301-1E) Instruction Manual

1. Ifihan

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your BBLD 1/18 Scale RC Car, Model 9301-1E. Please read this manual thoroughly before operating the vehicle to ensure optimal performance and longevity.

2. Ohun ti o wa ninu Apoti

Your BBLD RC Car package includes the following items:

BBLD 1/18 Scale RC Car and included accessories

Image: The BBLD 1/18 Scale RC Car, remote control, two batteries, USB charging cable, and various tools included in the package.

3. Ọja Ipariview

The BBLD 1/18 Scale RC Car is an IPX4 waterproof 4X4 off-road truck designed for various terrains. It features a robust RC380 brushed motor and a 2.4GHz anti-interference remote control system.

Awọn ẹya pataki:

BBLD RC Car demonstrating high speed on a dirt track

Image: The BBLD RC Car in action, highlighting its speed capability of 40KM/H.

BBLD RC Car with two batteries, illustrating 45 minutes of playtime

Image: The BBLD RC Car with two batteries, emphasizing the extended playtime of 45 minutes.

BBLD RC Car remote control with labeled functions

Image: The 2.4GHz remote control system for the BBLD RC Car, showing controls for forward, brake, backward, steering, steering trim, speed switch, and indicator light.

BBLD RC Car with off-road tires on various terrains

Image: The BBLD RC Car showcasing its off-road tires designed for diverse terrains including snow and mud.

BBLD RC Car components including lights, shell, motor, shock absorbers, bearings, and tires

Aworan: Alaye view of the BBLD RC Car's components: cool car lights, environmental PVC car shell, long-lasting and powerful motor, adjustable shock absorber, 15-grain bearing, and 69mm all-terrain rubber tire.

BBLD RC Car dimensions and accessories

Image: The BBLD RC Car with its dimensions (11.42in/290mm length, 7.68in/195mm width, 5.12in/130mm height) and a list of included accessories.

Awọn fidio Ọja Oṣiṣẹ:

Fidio: A kukuru ṣaajuview ifihanasing the BBLD Remote Control Car's ability to conquer various terrains and its off-road performance, including driving through water.

Video: A brief demonstration of the BBLD RC Truck's features and capabilities.

4. Eto

Battery Installation (Vehicle)

  1. Remove the four body clips located on each corner of the car's shell.
  2. Carefully lift the car's shell to expose the internal components.
  3. Connect the red battery connector from the battery to the corresponding red connector on the vehicle's internal wiring. Ensure a secure connection.
  4. Secure the battery using the hook-and-loop strap provided in the battery compartment.
  5. Replace the car's shell and re-insert the four body clips.

Fifi sori batiri (Iṣakoso latọna jijin)

  1. Ṣii ideri aporo batiri lori ẹhin iṣakoso latọna jijin.
  2. Insert 4 x AA batteries (not included) into the compartment, ensuring correct polarity.
  3. Pa ideri iyẹwu batiri naa.

Ngba agbara si awọn batiri

  1. Connect the white plug from the battery to the USB charging cable.
  2. Plug the USB charging cable into a 5V/0.5-2.0A USB adapter (e.g., computer USB port, USB wall adapter).
  3. The indicator light on the USB charger will show charging status (e.g., red for charging, green for fully charged).
  4. Charging typically takes approximately 1.5 hours per battery.

Pairing the Remote Control and Vehicle

  1. Ensure the vehicle's battery is connected and secured.
  2. Turn on the remote control by pressing and holding the power button until the indicator light flashes.
  3. Turn on the vehicle by sliding the ON/OFF switch located inside the chassis.
  4. The remote control and vehicle will automatically pair. The indicator lights on the transmitter and ESC should flash during binding and remain solid on the ESC after successful binding.

5. Awọn ilana Iṣiṣẹ

Mọ ara rẹ pẹlu awọn iṣẹ iṣakoso latọna jijin ṣaaju ki o to ṣiṣẹ ọkọ ayọkẹlẹ naa.

Awọn iṣẹ iṣakoso latọna jijin:

Awọn imọran Awakọ:

6. Itọju

Itọju gbogbogbo:

Itọju Batiri:

Battery Charging Safety Instructions for BBLD RC Car

Image: Important safety instructions for battery charging, including warnings against unattended charging, damaged chargers, and improper battery handling.

7. Laasigbotitusita

Tọkasi tabili atẹle fun awọn ọran ti o wọpọ ati awọn ojutu wọn:

IsoroOwun to le FaOjutu
Vehicle Stop WorkingCar battery is flat or damagedFully charge the battery pack. If charging does not work, use a new battery. Check if there is a problem with the charging cable. If so, replace it with a new one.
Awọn batiri isakoṣo latọna jijin ko fi sii daradaraCheck and confirm that the battery is installed properly.
Vehicle is not connected with transmitterCheck to ensure that the transmitter and car are connected. The LEDs on the transmitter and ESC should flash during binding and remain solid on the ESC after binding.
Idaabobo igbonaIf the vehicle body is driven at high temperatures for a long time, it may turn on the protection and cut off the power to avoid the risk of overheating and damage to the motor. Take out the vehicle battery and wait for it to cool down completely and fully recharge.
Parts damagedCheck for damaged parts such as wires, connectors, motors, ESCs, axles, etc. Repair or replace if necessary.
Vehicle works, but has poor or no steeringCar battery is flat or damagedFully charge the battery pack. Or replace it if needed.
Steering trim not properly setAdjust the 'ST. TRIM' on the transmitter to check whether the tires can be steered.
Parts loose or damagedCheck if the steering linkage is loose/broken or if the servo is faulty.
Incapable of connection / Short control rangeCar/transmitter battery is flat or damagedCheck and fully charge the battery pack, or replace it if needed.
Ijinna iṣakoso ti gun juCheck to be within signal transmission distance.
kikọlu ifihan agbaraStop driving and try to operate the vehicle in a new area. If the problem persists, contact the after-sales service.
Igbesi aye batiri kukuruOld/worn-out batteryLook for swelling, deformation, edge damage. Replace with new battery.
Batiri ko gba agbara ni kikunEnsure proper charging following battery charging guidelines.
Constant high-speed/rapid accelerationAvoid sustained high speeds and sudden acceleration to extend battery life.
Sluggish PerformanceDirty or damaged drivetrain/suspensionInspect and replace any broken gears, shafts, outdrive cups, suspension components, etc.
Batiri Ko Ngba agbaraOhun ti nmu badọgba ti ko tọ loOnly use 5V/0.5-2.0A adapter. Incorrect adapter may damage battery/charger.
Over-discharged or damaged batteryCheck battery pack condition and replace if needed.
Damaged USB chargerCheck USB cable/charger following charging instructions and replace if needed.
Vehicle Does Not ReverseBatiri kekereEnsure battery is fully charged before operating.
Incorrect throttle center point setupTurn power off/on without moving trigger until the vehicle is bound with the transmitter to allow ESC/Receiver's auto-setup of the throttle center point.
Incorrect trigger operationCenter trigger first, then pull back to go in reverse, to allow ESC/Receiver's auto-setup of the throttle center point.
Damaged waterproof ESC/Receiver or transmitterReplace the waterproof ESC/Receiver unit or transmitter.

8. Awọn pato

9. Alaye Aabo

10. Atilẹyin ọja ati Support

Your BBLD RC Car comes with a 12-month extended warranty. For any technical support, missing parts, or warranty claims, please contact BBLD US directly through their official channels or the Amazon seller support page.

Awọn iwe aṣẹ ti o jọmọ - 9301-1E

Ṣaajuview Ẹgbẹ ti o somọ RC8B4.1e 1: 8 Asekale Ina Ita Idije Idije Apejọ Buggy
Eyi ni itọnisọna apejọ fun Ẹgbẹ RC8B4.1e ti o somọ, iwọn 1: 8 kan 4WD itanna pa-opopona ohun elo buggy. O pese alaye, awọn ilana igbesẹ-nipasẹ-igbesẹ, awọn atokọ apakan, ati awọn imọran iranlọwọ fun kikọ awoṣe.
Ṣaajuview Siemens GMA..1 Afẹ́fẹ́ DampÀwọn Olùṣiṣẹ́: Ìwé Ìwádìí Ìmọ̀-ẹ̀rọ
Àwọn àlàyé ìmọ̀-ẹ̀rọ tó ṣe kedere, iṣẹ́, àti ìwífún nípa àṣẹ fún Siemens GMA..1 series rotary air dampÀwọn actuators. Ó bo àwọn irú ìṣàkóso ipò méjì, ipò mẹ́ta, àti ìyípadà pẹ̀lú iṣẹ́ ìpadàsẹ́yìn ìgbà omi, tí ó dára fún àwọn ohun èlò HVAC.
Ṣaajuview VRX-1E 1/8 Scale 4WD Brushless Ready-to-Run Truggy Instruction Manual
Comprehensive instruction manual for the VRX-1E 1/8 Scale 4WD Brushless Ready-to-Run Truggy, covering features, technical data, safety precautions, battery handling, charging, storage, and parts lists.
Ṣaajuview Carisma MSA-1E Suzuki Jimny JB74 1/24 Afọwọṣe Olumulo Crawler Iwọn & Itọsọna Iṣeto
Iwe afọwọkọ olumulo okeerẹ ati itọsọna iṣeto fun Carisma MSA-1E 1/24 Scale Crawler, ti o nfihan ara Suzuki Jimny JB74. Pẹlu awọn ilana iṣeto, awọn iṣọra ailewu, idamọ awọn apakan, ati awọn pato imọ-ẹrọ.
Ṣaajuview Awọn ilana Iṣagbesori Siemens Actuators
Awọn ilana iṣagbesori fun Siemens Actuators, pẹlu awọn aworan wiwiri ati awọn alaye imọ-ẹrọ fun awọn awoṣe G..A161.1E/MO, G..B161.1E/MO, GEB161.1E/MO, ati GIB161.1E/MO.
Ṣaajuview Siemens OpenAir™ VAV Compact Controller KNX/PL-Link G..B181.1E/KN Technical Basics
Technical documentation for Siemens OpenAir™ VAV compact controllers (KNX/PL-Link G..B181.1E/KN), covering device basics, installation, engineering, commissioning, and technical specifications for building automation systems.