INVICTA Attiva x Digital ACW8105MC-005 Digital Quartz Watch User Manual

1. Ọja Ipariview

The INVICTA Attiva x Digital ACW8105MC-005 is a men's digital watch designed for durability and precise timekeeping. It features a 45mm plastic case with a black dial, powered by a reliable quartz movement. This model offers water resistance up to 3 bar, making it suitable for everyday use.

Awọn ẹya pataki pẹlu:

• 45mm plastic case with a black dial.
• Precise quartz movement for accurate timekeeping.
• Water resistance up to 3 bar (30 meters / 100 feet).
• Part of the Attiva x Invicta Digital collection.

Aworan 1.1: Iwaju view of the INVICTA Attiva x Digital ACW8105MC-005 watch, showcasing its black digital display and robust plastic casing.

2. Eto

2.1 Ibẹrẹ Ayẹwo

Upon unpacking your watch, carefully inspect it for any visible damage. Remove any protective films from the watch face or case back.

2.2 Eto Aago ati Ọjọ

Digital watches typically have 2-4 buttons for operation. While specific button functions may vary, the general procedure for setting time and date is as follows:

1. Tẹ Ipo Eto: Tẹ mọlẹ MODE button (often located on the bottom left) until the time display starts flashing, indicating you are in setting mode.
2. Yan Ohun kan: Tẹ awọn MODE button repeatedly to cycle through the settings: seconds, hours, minutes, month, day, year.
3. Ṣatunṣe iye: Lo awọn ṢAtunṣe or SET button (often top right) to increase or decrease the flashing value.
4. Jẹrisi ati Jade: Ni kete ti gbogbo eto ba tọ, tẹ bọtini naa MODE bọtini lẹẹkansi tabi awọn Imọlẹ button (if available) to exit the setting mode.

Àkíyèsí: Tọ́ka sí àwọn àmì bọ́tìnì pàtó lórí aago rẹ fún iṣẹ́ tó péye.

3. Awọn ilana Iṣiṣẹ

3.1 Ifihan Aago

The watch primarily displays the current time (hours, minutes, seconds). Some models may offer 12-hour or 24-hour format options, which can usually be toggled in the setting mode.

3.2 Iṣẹ itaniji

Lati ṣeto itaniji:

1. Tẹ awọn MODE button until the alarm display appears (often indicated by "AL" or a bell icon).
2. Tẹ mọlẹ ṢAtunṣe bọtini titi ti akoko itaniji yoo bẹrẹ ìmọlẹ.
3. Lo awọn ṢAtunṣe or SET bọtini lati ṣeto aago itaniji ti o fẹ ati iṣẹju.
4. Tẹ MODE lati jẹrisi ati jade.
5. Lati mu itaniji ṣiṣẹ/mu ma ṣiṣẹ, tẹ awọn ṢAtunṣe button while in alarm mode. An alarm icon will typically appear when active.

3.3 Aago Aago

Lati lo aago iṣẹju-aaya:

1. Tẹ awọn MODE button until the stopwatch display appears (often indicated by "ST" or "STOP").
2. Tẹ awọn Bẹrẹ/Duro button (often top right) to begin timing.
3. Tẹ awọn Bẹrẹ/Duro button again to pause/resume timing.
4. Tẹ awọn Tunto button (often bottom right) to clear the stopwatch to zero.

3.4 Imọlẹ ẹhin

If your watch features a backlight, press the Imọlẹ button (usually top left) to illuminate the display in low-light conditions. The backlight typically stays on for a few seconds.

4. Itọju

4.1 Omi Resistance

This watch is water resistant up to 3 bar (30 meters / 100 feet). This rating means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. It is NOT suitable for showering, swimming, diving, or snorkeling. Ma ṣe ṣiṣẹ awọn bọtini lakoko aago naa jẹ tutu tabi wọ inu omi.

4.2 Ninu

Lati nu aago rẹ nu, pa a rọra pẹlu asọ ti o gbẹ. Fun idoti alagidi, die-die damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch case and strap.

4.3 Batiri Rirọpo

The watch is powered by a quartz movement, which requires a battery. When the display becomes dim or the watch stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

5. Laasigbotitusita

• Ifihan ti ṣofo tabi baibai:

  The battery may be depleted. Replace the battery as described in Section 4.3. If the issue persists after battery replacement, contact support.
• Akoko ko pe:

  The time may need to be reset. Follow the instructions in Section 2.2. Ensure you are setting the correct AM/PM if using a 12-hour format.

• Awọn bọtini ko dahun:

  Ensure the watch is not in a locked mode (some watches have a button lock feature). If the watch was recently exposed to water, ensure it is completely dry. If the issue persists, a reset (if available) or professional inspection may be required.

• Itaniji ko dun:

  Verify that the alarm function is activated (check for the alarm icon on the display). Ensure the alarm time is set correctly.

6. Awọn pato

7. Atilẹyin ọja ati Support

7.1 atilẹyin ọja Alaye

This INVICTA Attiva x Digital watch comes with a 2-year Activa x Invicta warranty. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper use, accidents, unauthorized repairs, or normal wear and tear.

7.2 Onibara Support

For warranty claims, technical assistance, or any questions regarding your watch, please refer to the official Invicta webojula tabi kan si wọn onibara iṣẹ Eka. Jeki ẹri rira rẹ fun ijẹrisi atilẹyin ọja.

You can often find contact information and FAQs on the official Invicta Store tabi ile-iṣẹ wọn webojula.