Ìwé Ìtọ́sọ́nà Olùlò Agbekọri Bluetooth Baseus EH10 NC

Ọrọ Iṣaaju

Welcome to your new Baseus EH10 NC Bluetooth Headphones. These over-ear headphones feature -45dB Hybrid Active Noise Cancellation, Hi-Res and LDAC audio support, 5 AI microphones for clear calls, and multi-point connectivity. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

Package Awọn akoonu

• 1 x Baseus EH10 NC ANC Headphones
• 1 x Okun Gbigba agbara (USB-C)
• 1 x Itọsọna olumulo (iwe yii)

Ọja Pariview

The Baseus EH10 NC headphones are designed for comfort and superior audio quality. Familiarize yourself with the physical components for ease of use.

The image displays the Baseus EH10 NC over-ear headphones in black, showcasing the earcups, headband, and general design. The left earcup typically features control buttons and a charging port.

The front of the product packaging for the Baseus EH10 NC headphones, highlighting key features such as -45dB ANC, 40mm dynamic drivers, CloudComfort, 80-hour battery life, and Hi-Res Audio certification.

The back of the product packaging, illustrating features like SuperBass 2.0, long-lasting playtime, and CloudComfort. It also includes regulatory information and contact details for support.

Ṣeto

Ngba agbara si Awọn Agbekọri

The headphones come with a built-in rechargeable Lithium-Ion battery. Before first use, it is recommended to fully charge the headphones.

1. So okun gbigba agbara USB-C ti a pese si ibudo gbigba agbara lori awọn agbekọri.
2. So ìpẹ̀kun kejì okùn náà mọ́ orísun agbára USB tó báramu (fún àpẹẹrẹ, adapter ògiri, ibudo USB kọ̀ǹpútà).
3. Ina Atọka yoo fi ipo gbigba agbara han ati paa tabi yi awọ pada nigbati o ba gba agbara ni kikun.

A full charge provides up to 80 hours of playtime with ANC disabled, or 55 hours with ANC enabled. A quick 10-minute charge can provide approximately 10 hours of playtime.

Asopọ Bluetooth

Lati so agbekọri rẹ pọ mọ ẹrọ nipasẹ Bluetooth:

1. Rii daju pe awọn agbekọri ti wa ni pipa.
2. Press and hold the power button until the indicator light flashes rapidly, indicating pairing mode.
3. Lori ẹrọ rẹ (foonuiyara, tabulẹti, kọmputa), mu Bluetooth ṣiṣẹ ki o wa awọn ẹrọ to wa.
4. Select "Baseus EH10 NC" from the list of detected devices.
5. Once connected, the indicator light will stop flashing and remain solid or turn off, depending on the model.

The headphones support Bluetooth 6.0 for stable wireless communication.

Awọn ilana Iṣiṣẹ

Fagilee Ariwo Ti nṣiṣe lọwọ (ANC)

The Baseus EH10 NC headphones feature -45dB Hybrid Active Noise Cancellation to reduce ambient noise. This allows for a more focused listening experience.

• ANC Lori: Press the dedicated ANC button (or multi-function button, refer to specific button layout) to activate noise cancellation.
• Ipo Ohun Ibaramu: Press the ANC button again to switch to Ambient Sound Mode, which allows you to hear your surroundings while audio plays.
• ANC Paa: Press the ANC button a third time to turn off all noise control modes.

Sisisẹsẹhin ohun

Use the control buttons on the earcup to manage your audio:

• Ṣiṣẹ/Daduro: Nikan tẹ bọtini iṣẹ-ọpọlọpọ.
• Orin t’okan: Tẹ bọtini iṣẹ-ọpọlọpọ lẹẹmeji.
• Tẹlẹ Orin: Meteta tẹ bọtini iṣẹ-ọpọlọpọ.
• Iwọn didun Soke/Isalẹ: Use the dedicated volume buttons.

These headphones support Hi-Res and LDAC audio, providing high-fidelity sound. SuperBass 2.0 technology enhances low frequencies for a richer bass experience.

Isakoso Ipe

The headphones are equipped with 5 AI microphones and an ENC system for clear calls, even in noisy environments.

• Idahun/Ipe Ipari: Nikan tẹ bọtini iṣẹ-ọpọlọpọ.
• Kọ Ipe: Tẹ mọlẹ bọtini iṣẹ-ọpọlọpọ fun isunmọ awọn aaya meji.

Olona-Point Asopọmọra

The Baseus EH10 NC supports multi-point connection, allowing you to connect to two devices simultaneously. This enables seamless switching between audio sources.

1. Pair the headphones with the first device as described in the "Bluetooth Pairing" section.
2. Once connected, temporarily disconnect Bluetooth on the first device.
3. Fi awọn agbekọri pada si ipo sisọpọ ki o so wọn pọ pẹlu ẹrọ keji.
4. So Bluetooth pọ̀ mọ́ ẹ̀rọ àkọ́kọ́. Ó yẹ kí a so agbekọri náà pọ̀ mọ́ ẹ̀rọ méjèèjì báyìí.

Audio will switch automatically between devices based on active playback or incoming calls.

Itoju

Ninu

• Mu awọn agbekọri nu pẹlu asọ, gbẹ, asọ ti ko ni lint.
• Má ṣe lo àwọn ohun ìfọṣọ, àwọn ohun tí a fi ń yọ́ nǹkan, tàbí àwọn kẹ́míkà líle, nítorí pé wọ́n lè ba ojú tàbí àwọn ohun èlò inú jẹ́.
• Ensure no liquid enters the earcups, charging port, or microphone openings.

Ibi ipamọ

• Tọju awọn agbekọri naa ni itura, aye gbigbẹ, kuro lati oorun taara ati awọn iwọn otutu to gaju.
• When not in use for extended periods, charge the battery periodically (e.g., once every three months) to maintain its lifespan.
• Avoid placing heavy objects on the headphones to prevent damage.

Laasigbotitusita

If you encounter issues with your Baseus EH10 NC headphones, refer to the following common solutions:

• Ko si Agbara: Ensure the headphones are fully charged. Connect them to a power source and check the charging indicator.
• Ko le So pọ: Make sure the headphones are in pairing mode (indicator flashing) and within 10 meters of your device. Turn off and on Bluetooth on your device, then try pairing again.
• Ko si Ohun: Check volume levels on both the headphones and your connected device. Ensure the headphones are correctly paired and selected as the audio output device.
• ANC Ko munadoko: Ensure the earcups form a good seal around your ears. Check that ANC is enabled and that you are in a suitable environment for noise cancellation.
• Awọn ọran Didara Ipe: Ensure the microphones are not obstructed. Move to an area with less background noise. Check your device's call settings.
• Asopọmọra Laarin: Ensure there are no significant obstacles between the headphones and your device. Avoid environments with strong electromagnetic interference.

If the problem persists, try resetting the headphones (refer to the full product manual for specific reset instructions, if available) or contact customer support.

Awọn pato

Atilẹyin ọja ati Support

For product support, warranty information, or technical assistance, please contact Baseus customer service using the details below. Please retain your proof of purchase for any warranty claims.

Atilẹyin agbaye:

• Foonu: +1 800 220 8056
• Imeeli: care@baseus.com