1. Ifihan ati Loriview
The SmallRig RS20 Mini Camera Flash is a compact and powerful GN12 speedlite designed for mirrorless cameras, offering professional-grade lighting in a portable form factor. It features a built-in 2000mAh battery, an intuitive OLED screen for precise control, and rapid recycling times, making it ideal for various photography scenarios.
Awọn ẹya pataki pẹlu:
- Pro-Brightness in Palm Size: Delivers 200W COB Light-equivalent output at only 4.5oz (128g).
- Igbesi aye batiri gigun: 2000mAh lithium battery supports 500+ flashes at maximum power, with a 3-hour full charge time via USB-C.
- Àkókò Àtúnlo Yára: Achieves 0.1s recycle at minimum power and 1.8s at full burst.
- OLED Display Precision Control: Intuitive interface with 8 power levels and 22 steps (1/1 to 1/128 plus 0.3-step fine-tuning).
- Universal Hot Shoe Compatibility: Mounts directly onto mirrorless cameras from Canon, Sony, Nikon, Fujifilm, and Olympus without adapters.
- Wireless Multi-Flash Sync: Supports advanced optical synchronization for professional lighting setups.
2. Ohun ti o wa ninu Apoti
Jẹrisi pe gbogbo awọn paati wa ninu package:
- Filaṣi x 1
- Okun gbigba agbara USB-C x 1
- Apo Ipamọ x 1
- Ilana iṣiṣẹ x 1
3. Eto
3.1 Ngba agbara si Batiri naa
Before first use, fully charge the built-in 2000mAh lithium battery. Use the provided USB-C charging cable and connect it to a 5V 1A power source. A full charge typically takes approximately 3 hours.
3.2 Fifi Flash sori ẹrọ
The SmallRig RS20 Mini Flash is designed with a universal single contact hot shoe, ensuring broad compatibility with most mirrorless cameras from brands like Canon, Sony, Nikon, Fujifilm, and Olympus.
- Rii daju pe kamẹra rẹ ti wa ni pipa.
- Slide the hot shoe mount of the RS20 flash into your camera's hot shoe slot until it clicks securely into place.
- Ensure the flash is firmly seated to maintain a stable connection.
4. Awọn ilana Iṣiṣẹ
4.1 Agbara Tan / Pa
Locate the power switch on the side of the flash unit. Slide it to the 'ON' position to power on the device. Slide it to the 'OFF' position to power off.
4.2 Ṣíṣe àtúnṣe Àwọn Ìpele Agbára
The RS20 features an intuitive OLED display for precise control over flash output. It offers 8 power levels and 22 steps, ranging from 1/1 (full power) to 1/128, with 0.3-step fine-tuning capability.
- Use the 'MODE' button to cycle through available modes (e.g., Manual, Optical Slave).
- Use the '+' and '-' buttons to adjust the flash power output according to your lighting needs. The OLED screen will display the current power setting.
4.3 Recycling Time
The RS20 Mini Flash boasts a fast recycling time, allowing for rapid consecutive shots. It can recycle in 0.1 seconds at minimum power and 1.8 seconds at full power, enabling the capture of up to 8 photos within 3 seconds.
4.4 Wireless Multi-Flash Sync
The RS20 supports advanced optical synchronization, allowing you to build professional multi-flash lighting setups. You can designate units as transmitters or responders for complex lighting scenarios such as 3-point studio portraiture or 360° product shoots.
5. Itọju
To ensure the longevity and optimal performance of your SmallRig RS20 Mini Camera Flash, follow these maintenance guidelines:
- Ninu: Use a soft, dry cloth to wipe the exterior of the flash. For stubborn dirt, slightly dampen the cloth with water. Avoid using strong detergents or solvents.
- Ibi ipamọ: When not in use, store the flash in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Itọju Batiri: If storing for extended periods, charge the battery to approximately 50% every three months to preserve battery health.
- Yago fun Ipa: Protect the flash from drops and impacts, which can damage internal components.
6. Laasigbotitusita
If you encounter issues with your SmallRig RS20 Mini Camera Flash, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Flash ko tan ina. | Batiri ti dinku tabi ko gba agbara. | Charge the flash using the USB-C cable. Ensure the power switch is in the 'ON' position. |
| Filaṣi ko ina. | Incorrect mounting or poor hot shoe contact. Flash is in an incompatible mode. | Ensure the flash is securely mounted on the camera's hot shoe. Check the flash mode settings on the OLED display. |
| Slow recycling time. | Battery is low. Flash is set to full power. | Recharge the battery. Reduce the flash power output. |
| Ifihan OLED ko ṣofo tabi ko dahun. | Aṣiṣe ẹrọ. | Gbìyànjú láti pa ẹ̀rọ náà kí o sì tún un ṣiṣẹ́. Tí ìṣòro náà bá ń bá a lọ, kan si olùrànlọ́wọ́ oníbàárà. |
If the problem persists after attempting these solutions, please contact SmallRig customer support for further assistance.
7. Awọn pato
Detailed technical specifications for the SmallRig RS20 Mini Camera Flash (Model: 5374):
| Sipesifikesonu | Iye |
|---|---|
| Ọja Mefa | 2.8 x 2.9 x 1.8 inches (46.0 × 71.0 × 73.0mm) |
| Iwọn Nkan | 4.5 ounces (128.0 ± 5.0g) |
| Nọmba awoṣe | 5374 |
| Batiri Iru | Nonstandard Battery (included) |
| Agbara Batiri | 3.7V2000mAh |
| Gbigba agbara agbara | 5V1A |
| Akoko gbigba agbara | wakati meji 3 |
| Flash Count (Max Power) | 500 Asokagba |
| Recycle Time (Max Power) | 1.8 aaya |
| Power Adjustment Levels | 8 stops (1/1 to 1/128) |
| Nọmba Itọsọna | GN12 |
| Iwọn otutu awọ | 6500K |
| Iyara Amuṣiṣẹpọ julọ | 1/250 iṣẹju-aaya |
| Awọn iṣagbesori ibaramu | Universal Hot Shoe Mount |
| Ohun elo | ABS ṣiṣu |
8. Atilẹyin ọja ati Support
SmallRig products are designed for reliability and performance. For warranty information and customer support, please refer to the official SmallRig webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.
Fun afikun awọn orisun ati alaye ọja, ṣabẹwo si Ile itaja SmallRig osise lori Amazon.
