1. Ifihan
This manual provides essential instructions for the safe installation, operation, and maintenance of your Ranein 2.5-Gallon Mini Tank Electric Water Heater. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your water heater.
Image: The Ranein 2.5-Gallon Mini Tank Electric Water Heater, a compact unit designed for point-of-use hot water.
2. Alaye Aabo
Your safety and the safety of others are paramount. This water heater is equipped with multiple safety features. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury.
- A ṣe iṣeduro fifi sori Ọjọgbọn: Installation should be performed by a qualified plumber or electrician in accordance with all local codes and regulations.
- Aabo Itanna: Ensure the unit is properly grounded. Do not operate if the power cord is damaged.
- Ipa omi: Do not exceed the maximum rated water pressure of 150 PSI. A pressure relief valve is included and must be installed.
- Awọn Eto otutu: Be aware that water temperatures above 125°F (52°C) can cause severe burns or scalding. Adjust the thermostat carefully.
- Ààbò Ìjó Gbígbẹ: The unit includes dry-burn protection, which automatically shuts off heating if the tank is empty.
- IPX4 Mabomire Rating: Provides protection against splashing water.
- Iwari jijo: The system is designed with rapid leak detection for enhanced safety.
Image: Diagram illustrating the multiple protection features of the Ranein water heater, including high temperature, corrosion, high pressure, dry burning, IPX4 waterproof, and leakage resistance.
3. Awọn ẹya Ọja
The Ranein 2.5-Gallon Mini Tank Electric Water Heater is designed for efficient and convenient hot water supply at the point of use. Key features include:
- Omi Gbona Lẹsẹkẹsẹ: 1440W, 120V mini tank heater provides immediate hot water, eliminating waiting times for kitchen sinks, utility basins, bathrooms, RVs, and cabins.
- Adijositabulu otutu: Customize water temperature from 68°F to 149°F (20°C to 65°C).
- Ikole ti o tọ: Features a premium 304 stainless steel inner tank for corrosion resistance, scale buildup prevention, and high-pressure wear, outlasting standard enamel glass-lined tanks. Includes a reinforced welded structure and magnesium anode rod.
- Triple-Layer Heat Retention: Advanced insulation system with enamel coating, high-density foam, and reinforced steel housing reduces standby heat loss by up to 30%, ensuring 99% heating efficiency.
- 6-Level Safety Protection: Incorporates an adjustable thermostat, over-temperature safeguard (up to 185°F/85°C), high-pressure resistance (up to 150 PSI), dry-burn protection, IPX4 waterproof rating, and rapid leak detection.
- Fifi sori ẹrọ lọpọlọpọ: Compact design allows for wall, floor, or under-sink mounting with standard 1/2" NPT connections. Plugs into a standard 120V outlet.
Image: Visual representation of key features including 1440W fast heating, intelligent constant temperature, easy installation, and 6 safety protections.
Image: Diagram highlighting the 3D foam insulation layer for high material density, one-piece foaming technology, sealed and leak-proof design, high temperature resistance, and long-lasting heat preservation.
4. Awọn alaye ọja
| Sipesifikesonu | Iye |
|---|---|
| Brand | Ranein |
| Nọmba awoṣe | RC25G-W |
| Agbara | 2.5 galonu |
| Wattage | 1440 Wattis |
| Voltage | 120V |
| Awọn iwọn Ọja (W x H) | 13.39" x 13.39" |
| Ijinle Nkan | 11.42 inches |
| Iwọn Nkan | 17.63 iwon |
| Iwọn Omi ti o pọju | 150 PSI |
| Mabomire ite | IPX4 |
| Iṣagbesori Iru | Floor, Under Sink, Wall |
| Àwọ̀ | Funfun |
Image: Detailed product parameters including capacity, voltage, power, max water pressure, weight, amperage, and waterproof grade.
5. Package Awọn akoonu
Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- Ranein 2.5-Gallon Mini Tank Electric Water Heater Unit
- Pressure Relief Valve (T/P Valve)
- Okun Omi (2)
- Oke Atẹgun
- Iṣagbesori skru ati ìdákọró
- Imugbẹ Okun
- Teflon teepu
6. fifi sori
This section outlines the steps for installing your Ranein Mini Tank Electric Water Heater. For safety and proper function, it is highly recommended that installation be performed by a qualified professional.
6.1 Gbogbogbo Awọn ilana fifi sori ẹrọ
- Choose a location that is protected from freezing temperatures and is close to the point of use to minimize heat loss.
- Ensure adequate clearance around the unit for maintenance and air circulation. Refer to the 'Please Confirm Your Under-sink Space' image for minimum clearances if installing under a sink.
- The unit can be mounted on a wall, placed on the floor, or on a shelf.
Image: Diagram showing minimum space requirements for under-sink installation, with 5 inches above and 2 inches on either side of the unit.
6.2 Omi Asopọ
- Pa akọkọ ipese omi.
- Apply Teflon tape to the threads of the pressure relief valve (T/P valve) and install it into the hot water outlet (red marked port) on top of the water heater. Tighten with a wrench.
- Connect the flexible water hoses to the hot water outlet (from T/P valve) and cold water inlet (blue marked port) on the water heater. Ensure connections are tight to prevent leaks.
- Connect the other ends of the flexible hoses to your hot and cold water lines. The hot water line from the heater connects to the hot water faucet, and the cold water line from the main supply connects to the cold water inlet of the heater.
- Attach the drain hose to the T/P valve's discharge port. Route the drain hose to an open drain or suitable discharge area.
- Slowly turn on the main water supply and check for leaks. Open a hot water faucet to allow air to escape from the tank until water flows steadily.
Video: A detailed installation guide for the Ranein Mini Tank Water Heater, demonstrating water connections and mounting.
6.3 Itanna Asopọ
- Ensure the water heater is filled with water before connecting to power.
- Plug the water heater's power cord into a standard 120V grounded electrical outlet.
- Ma ṣe lo awọn okun itẹsiwaju tabi awọn oluyipada.
6.4 iṣagbesori Aw
The Ranein water heater offers flexible installation options:
- Under-sink: Place the unit directly on the floor or a sturdy shelf beneath the sink.
- Odi ti a fi sori: Use the provided mounting bracket, screws, and anchors to securely attach the unit to a wall. Ensure the wall material can support the weight of the full water heater.
Aworan: Examples of under-sink and wall-mounted installations for the Ranein water heater.
7. Isẹ
7.1 Ibẹrẹ Ibẹrẹ
- After completing water and electrical connections, ensure the tank is full by opening a hot water faucet until water flows without sputtering.
- Turn the temperature knob to your desired setting. The unit will begin heating the water.
7.2 Atunṣe iwọn otutu
The temperature knob on the front of the unit allows you to set the desired water temperature between 68°F and 149°F (20°C and 65°C). Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it. The 'Heating' indicator light will illuminate when the unit is actively heating water.
Image: Close-up of the temperature adjustment knob, showing settings from 55°F to 145°F and suggested temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
Fidio: A finifini loriview of the Ranein Mini Tank Water Heater, showcasing its compact design, high power heating, and ease of use in a kitchen setting.
8. Itọju
Regular maintenance helps ensure the efficiency and longevity of your water heater.
- Drain and Flush: Periodically drain and flush the tank to remove sediment buildup. This is especially important in areas with hard water. Refer to the installation section for draining procedures.
- Inspect T/P Valve: Annually check the pressure relief valve for proper operation. Lift and release the lever on the valve to ensure it opens and closes freely.
- Ayẹwo Ọpa Anode: The magnesium anode rod helps protect the tank from corrosion. It should be inspected and replaced as needed, typically every 1-3 years depending on water quality. This procedure may require professional assistance.
- Ode Ninu: Nu ode ti ẹyọ kuro pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
9. Laasigbotitusita
If you encounter issues with your water heater, refer to the following common troubleshooting steps. For complex problems, contact customer support.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si omi gbona | No power, thermostat set too low, dry-burn protection activated | Check power connection and outlet. Adjust thermostat. Ensure tank is full of water. |
| Omi ko gbona to | Thermostat set too low, excessive hot water demand, sediment buildup | Increase thermostat setting. Allow time for recovery. Drain and flush tank. |
| Omi jijo | Loose connections, T/P valve discharge, tank damage | Tighten water connections. Check T/P valve for proper function. If tank damage is suspected, turn off water and power immediately and contact support. |
| Iṣẹ ṣiṣe ariwo | Sediment buildup, air in system | Drain and flush tank. Open hot water faucet to release air. |
10. Atilẹyin ọja ati Support
Ranein ti pinnu lati pese awọn ọja ti o gbẹkẹle ati iṣẹ alabara ti o tayọ.
- Atilẹyin ọja: This product is backed by a 2-year tank warranty against manufacturing defects.
- Atilẹyin Onibara: For installation guidance, product consultation, or problem-solving services, please contact Ranein customer support.
- Ibi iwifunni:
Imeeli: service@ranein.net
Foonu (AMẸRIKA): (424) 452-2630
