HOTO PixelDrive Electric Screwdriver User Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your HOTO PixelDrive Electric Screwdriver, Model QWLSD014. Please read this manual thoroughly before using the product and retain it for future reference.

Ọja Pariview

Figure 1: HOTO PixelDrive Electric Screwdriver with included 30-piece bit set and cylindrical storage case.

Awọn ẹya pataki:

• Ifihan Smart: Shows real-time torque levels and battery charge.
• Torque ti o le ṣatunṣe: Six levels from 0.5 N·m to 6 N·m for various tasks.
• Iṣakoso Iyara Meji: 80 RPM for precision (half-press) and 200 RPM for efficiency (full-press).
• 30-Piece Bit Set: Includes 10 C6.3x25mm and 20 C6.3x50mm bits, organized in a triple-layer cylindrical case.
• Imọlẹ LED ti a ṣepọ: 360-degree illumination for dark or confined spaces.
• Batiri gbigba agbara: 2000 mAh Lithium-Ion battery with USB-C charging.

Awọn eroja to wa:

• 1 x HOTO PixelDrive Cordless Screwdriver
• 1 x 30-Piece Screwdriver Bit Set (10 x C6.3x25mm, 20 x C6.3x50mm)
• 1 x USB-C Charging Cable (not explicitly listed but implied by USB-C charging)

olusin 2: exploded view illustrating the screwdriver and its organized bit storage system.

Ṣeto

1. Charging the Screwdriver:

Before first use, fully charge the HOTO PixelDrive Electric Screwdriver. Connect the provided USB-C cable to the charging port located at the bottom of the screwdriver and plug the other end into a compatible USB power adapter (not included). The smart display will indicate the battery charge status during charging.

Figure 3: The screwdriver features a 2000 mAh battery and a convenient USB-C charging port.

2. Bit Installation:

1. Open the cylindrical bit storage case by rotating the sections.
2. Yan awọn yẹ screwdriver bit fun nyin iṣẹ-ṣiṣe.
3. Insert the chosen bit into the magnetic bit holder at the tip of the screwdriver. Ensure it is securely seated.

Figure 4: Visual guide for opening the bit cylinder, attaching a bit, and adjusting torque.

Awọn ilana Iṣiṣẹ

1. Power On/Off and Torque Adjustment:

• Rotate the ring at the top of the screwdriver to select one of the six torque levels (0.5 N·m to 6 N·m). The smart display will show the selected torque.
• To turn off the screwdriver, rotate the ring to the "OFF" position.

Figure 5: The smart display provides real-time feedback on torque and battery life.

2. Speed Control (Dual Speed):

• The screwdriver features a dual-speed trigger.
• Titẹ-idaji: Activates the low speed (80 RPM) for precision work.
• Titẹ ni kikun: Activates the high speed (200 RPM) for faster operation and increased productivity.

Figure 6: Dual-speed control allows for precise or rapid operation based on trigger pressure.

3. Switching Torque Units (N·m / lb-in):

To switch between Newton-meters (N·m) and Inch-pounds (lb-in) on the smart display, press and hold both the forward and reverse buttons simultaneously for 3 seconds. Wake the screen with a forward/reverse press, then adjust torque.

Figure 7: Instructions for switching between N·m and lb-in torque units on the smart display.

4. Recommended Torque Settings for Various Applications:

Figure 8: Torque level guide for various tasks and compatible bit types.

Itoju

• Jẹ́ kí ẹ̀rọ ìfàmọ́ra àti àwọn ègé náà mọ́ tónítóní kí wọ́n sì gbẹ. Fi aṣọ rírọ̀ nu ún.amp asọ.
• Store the screwdriver and bits in their original cylindrical case to prevent loss and damage.
• Yago fun ṣiṣafihan ẹrọ naa si awọn iwọn otutu to gaju, oorun taara, tabi ọrinrin.
• Regularly check the bits for wear and replace them if they become dull or damaged.

Laasigbotitusita

Awọn pato

• Orukọ awoṣe: QWLSD014
• Brand: FOTO
• Ohun elo: Aluminiomu
• Ìwọ̀n Nkan: 11.2 iwon (317 Giramu)
• Awọn iwọn ọja: 1.5 x 1.5 x 7.8 inches
• Batiri: 1 Litiumu Ion (tí ó wà pẹ̀lú rẹ̀), 2000 mAh
• Orisun Agbara: Agbara Batiri (USB-C gbigba agbara)
• Voltage: 4 Volts
• Ibiti Oyika: 0.5 - 6 N·m (up to 50 Inch Pounds)
• Iyara: Dual-speed (80 RPM / 200 RPM)
• Awọn ẹya pataki: Adjustable Torque, Dual-Speed Control, LED Light, Smart Display
• Awọn eroja to wa: 1 × PixelDrive Cordless Screwdriver, 30-Piece Screwdriver Bit Set (10 × C6.3 × 25mm, 20 × C6.3 × 50mm)

Alaye Aabo

• Always wear appropriate safety gear, such as safety glasses, when operating power tools.
• Jẹ ki agbegbe iṣẹ jẹ mimọ ati itanna daradara. Awọn agbegbe idamu tabi awọn agbegbe dudu n pe awọn ijamba.
• Ma ṣe ṣiṣẹ awọn irinṣẹ agbara ni awọn bugbamu bugbamu, gẹgẹbi niwaju awọn olomi ina, gaasi, tabi eruku.
• Pa awọn ọmọde ati awọn alafojusi kuro lakoko ti o nṣiṣẹ ohun elo agbara kan. Awọn idamu le fa ki o padanu iṣakoso.
• Tọju awọn irinṣẹ agbara laišišẹ ni arọwọto awọn ọmọde ati ma ṣe gba awọn eniyan ti ko mọ pẹlu ohun elo agbara tabi awọn ilana wọnyi lati ṣiṣẹ ohun elo agbara naa.
• Use the correct bit for the application. Forcing the tool may cause damage or injury.
• Do not disassemble or modify the screwdriver. Repairs should only be performed by qualified personnel.

Awọn fidio ọja osise

Atilẹyin ọja ati Support

For warranty information and customer support, please refer to the official HOTO webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira fun eyikeyi awọn ibeere atilẹyin ọja.

Manufacturer: HOTO