1. Ifihan
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.
Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).
2. Eto
Follow these steps to set up your RGBlink NDI PTZ Camera Controller.
2.1 Unpacking ati Ibẹrẹ ayewo
- Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
- Verify that all items listed in the packing list are present.
- Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.
2.2 Nsopọ Adarí
The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.
- Agbara lori Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
- Adapter Agbara Ita: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
- Awọn isopọ kamẹra:
- Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
- Iṣakoso Ni tẹlentẹle: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.
Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.
Aworan 2.2: Example connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.
Image 2.3: Diagram illustrating IP camera connections via a network switch.
2.3 Iṣeto Nẹtiwọọki
For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.
- Access the controller's web ni wiwo nipa titẹ awọn oniwe-IP adirẹsi sinu kan web browser. (Refer to the device's display or network tools to find the IP address).
- The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
- Laarin awọn web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.
Image 2.4: NDI|HX camera search and control interface on the controller.
3. Isẹ
This section details the operational functions of the RGBlink NDI PTZ Camera Controller.
3.1 Ipariview ti Awọn iṣakoso
The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.
Image 3.1: The controller's 3.49-inch LCD display.
Aworan 3.2: alaye view of the 3D joystick and multi-function knobs.
Image 3.3: Layout of the controller's buttons and numeric keypad area.
3.2 kamẹra Yiyan
- Àwọn bọ́tìnì yíyàn kíákíá: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
- Nọmba bọtini foonu: For cameras beyond the quick select buttons (up to 255), press the ID CAM button, then enter the camera number using the numeric keypad, and press WOLE.
Image 3.4: The controller's ability to manage multiple cameras.
3.3 PTZ Iṣakoso
- Joysticks: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
- Knob Iyara PT: Adjusts the gimbal movement speed for pan and tilt.
- Zoom Knob: Provides precise zoom control, especially useful in preview mode.
3.4 Image Parameter Adjustment
- IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
- R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
- FOCUS Button: Tẹ awọn Idojukọ laifọwọyi button to switch the camera to auto focus mode.
- EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
- BACKLIGHT Button: Toggles the camera's backlight mode.
- WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
- ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.
Image 3.5: Functions of buttons and knobs on the left side of the controller.
Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.
Awọn tito tẹlẹ 3.5
- SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press WOLE lati fipamọ. Tẹ ESC lati jade.
- CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press WOLE to recall. Press ESC lati jade.
- The controller supports saving and recalling up to 255 presets per camera.
3.6 Lilọ kiri Akojọ aṣyn
- Bọtini MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), WOLE confirms selections, and ESC acts as a back button.
4. Itọju
Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.
4.1 Ninu
- Use a soft, dry cloth to clean the exterior of the controller.
- Fun idoti alagidi, die-die dampen asọ pẹlu omi tabi kan ìwọnba, ti kii-abrasive ninu ojutu.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
- Ensure no liquids enter the device through openings or ports.
4.2 Ibi ipamọ
- Tí o kò bá lò ó fún ìgbà pípẹ́, tọ́jú ẹ̀rọ ìṣàkóṣo náà sí ibi gbígbẹ tí ó tutù, tí ó jìnnà sí oòrùn tààrà àti ooru líle koko.
- Dabobo ẹrọ lati eruku ati ọrinrin.
5. Laasigbotitusita
Abala yii n pese awọn ojutu si awọn ọran ti o wọpọ ti o le ba pade.
5.1 Ko si Agbara
- Ṣayẹwo Orisun Agbara: Rí i dájú pé ohun tí a fi ń ṣe agbára náà so mọ́ olùdarí àti ibi tí agbára náà ti ń ṣiṣẹ́ dáadáa.
- PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
- Iduroṣinṣin USB: Inspect the power cable and Ethernet cable for any damage.
5.2 Cannot Control Camera
- Asopọmọra nẹtiwọki: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
- Ibamu Ilana: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
- ID kamẹra: Ensure the correct camera ID is selected on the controller.
- Awọn iwe-ẹri Iwọle: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web ni wiwo.
- Asopọmọra ni tẹlentẹle: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
- Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webojula fun awọn imudojuiwọn.
5.3 LCD Display Issues
- Ko si Ifihan: Rii daju pe oludari wa ni titan.
- Ifihan Dimi: Check if there are any brightness settings on the controller that can be adjusted.
6. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | RGBBKT |
| Awọn iwọn (L x W x H) | 11.4 x 7.8 x 5.9 inches (isunmọ 290 x 200 x 150 mm) |
| Iwọn | 2.2 poun (isunmọ 1 kg) |
| Ifihan | LCD 3.49" |
| Awọn Ilana Iṣakoso | VISCA over IP, ONVIF v2.42, NDI v5.5, Pelco-D/P |
| Awọn atọkun | RS232, RS422, RS485, RJ45 Ethernet (PoE) |
| Camera Capacity | Up to 255 PTZ cameras |
| Agbara Input | PoE or DC 12V (external adapter) |
| Joystick | High-precision Hall sensor 3D joystick |
Image 6.1: Controller dimensions and typical usage environments.
Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.
7. Ifihan fidio ọja
Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.
Video 7.1: Official demonstration of the RGBlink PTZ Camera Controller Joystick, showcasing multi-camera control and key features.
8. Atilẹyin ọja ati Support
For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webojula.
- Olupese: Xiamen RGBlink Science & Technology Co.,Ltd.
- Osise Webojula: www.rgblink.com (Akiyesi: Eyi jẹ aaye ibi URL, jọwọ tọka si apoti ọja rẹ tabi iwe aṣẹ osise fun atilẹyin to tọ webojula.)
- Ibi iwifunni: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.
