1. Ifihan
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop. This advanced cleaning device combines powerful vacuuming with professional mopping, intelligent navigation, and a convenient self-emptying and mop-cleaning station.
Jọ̀wọ́ ka ìwé ìtọ́ni yìí dáadáa kí o tó lo ọjà náà, kí o sì tọ́jú rẹ̀ fún ìtọ́kasí ọjọ́ iwájú.
2. Ọja irinše
The Cecotec Conga Z100 X-Treme package includes the following items:
- Robot Vacuum and Mop Unit
- Self-Emptying and Mop Cleaning Station
- Adapter agbara
- Àwọn Búrẹ́sì Ẹ̀gbẹ́ (ẹ̀yà mẹ́rin)
- Main Brush (silicone)
- Bimaterial Mop Pad
- Disposable Dust Bag (pre-installed in station)
- Clean Water Tank (in station)
- Dirty Water Tank (in station)
- Afowoyi Olumulo (iwe-ipamọ yii)
3. Eto
3.1 Unpacking ati Igbaradi
- Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
- Remove any protective films, stickers, or foam inserts from the robot and the station.
- Rii daju pe gbogbo awọn paati ti a ṣe akojọ si ni Abala 2 wa ati pe ko bajẹ.
3.2 Placing the Self-Emptying and Mop Cleaning Station
- Gbe ibudo naa si ori ilẹ lile ti o dada si odi kan.
- Ensure there is at least 1 meter (3 feet) of clear space in front of the station and 0.5 meters (1.5 feet) on either side to allow the robot to dock properly.
- Keep the station away from direct sunlight, heat sources, and areas with high humidity.
- Plug the power adapter into the station and then into a wall outlet.
3.3 Nkun Omi Omi mimọ
- Open the lid of the clean water tank on the station.
- Fill the tank with clean tap water up to the MAX line. Do not use detergents or cleaning solutions not approved by Cecotec.
- Close the tank lid securely.
3.4 Fifi awọn gbọnnu ẹ̀gbẹ́ sori ẹrọ
- Yi roboti pada si isalẹ.
- Align the side brushes with the corresponding posts (L for left, R for right) and press them down until they click into place.
3.5 Gbigba agbara akọkọ
- Place the robot onto the charging contacts of the station. Ensure the charging contacts on both the robot and the station are aligned.
- The robot will begin charging automatically. Allow it to fully charge before its first use (approximately 4-6 hours).
3.6 Mobile Application Connection
- Download the official Cecotec Conga app from your smartphone's app store.
- Follow the in-app instructions to register an account and connect your Conga Z100 X-Treme robot. This typically involves connecting to the robot's Wi-Fi network during the setup process.
4. Awọn ilana Iṣiṣẹ
4.1 Titan / Pa a
- Agbara Tan: Press and hold the power button on the robot until the indicator lights illuminate.
- Agbara Pa: Tẹ bọtini agbara naa ki o si di mu titi ti awọn ina ifihan yoo fi pa.
4.2 Bibẹrẹ a Cleaning ọmọ
- Ensure the robot is fully charged and the clean water tank is filled (for mopping).
- Press the clean button on the robot or use the mobile app to start a cleaning cycle. The robot will automatically leave the station and begin cleaning.
- To pause cleaning, press the clean button once. Press again to resume.
- To send the robot back to the station, press the home button on the robot or use the app.
4.3 ninu awọn ipo
The robot offers various cleaning modes accessible via the mobile application:
- Ipo Aifọwọyi: Robot ni oye wẹ gbogbo agbegbe ti a ya aworan mọ.
- Ipo Aami: Cleans a specific small area with concentrated effort.
- Ipo eti: Fọ pẹlú Odi ati aga egbegbe.
- Isọmọ agbegbe: Allows you to define specific areas on the map for cleaning.
4.4 AI Navigation and Obstacle Avoidance
The Conga Z100 X-Treme utilizes AI with LaserEye technology for precise navigation. It identifies small objects, different floor types, and dirt levels, adapting its cleaning strategy accordingly. This allows it to navigate complex environments and avoid obstacles effectively.
4.5 AquaCycle Professional Mopping
The AquaCycle system ensures continuous mopping with clean water. The robot wets the bimaterial mop with clean water and wrings out dirty water into a separate tank, providing efficient and hygienic floor cleaning.
4.6 Wet&Protect Technology
The robot's intelligent mopping adapts to different surfaces. Its bimaterial mop provides deep cleaning with a super-absorbent side. When a carpet is detected, the robot activates CarpetCare mode and uses the smooth side of the mop to protect the carpet from moisture.
4.7 Agbára fífà
With an Ungravity motor providing 20000 Pa of suction power, the robot effectively cleans hidden dirt, even from high-pile carpets and deep tile grout.
5. Itọju
Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum and mop.
5.1 Self-Emptying Station Maintenance
- Rirọpo Apo Eruku: The station automatically empties the robot's dust bin into a disposable dust bag. Replace the dust bag when the indicator light on the station signals it is full (approximately every 12 weeks, depending on usage).
- Omi omi mimọ: Refill with clean water before each mopping cycle.
- Omi omi idọti: Empty and rinse the dirty water tank after each mopping cycle to prevent odors and bacterial growth.
- Gbigbe mop: The station dries the mop with hot air after cleaning. Ensure the mop is properly positioned for effective drying.
5.2 Robot Components Cleaning
- Fẹlẹ akọkọ: Regularly remove hair and debris from the main silicone brush. Use the cleaning tool provided.
- Awọn brushes ẹgbẹ: Check for tangled hair or debris and clean as needed. Replace if worn or damaged.
- Bimaterial Mop Pad: Remove the mop pad after each mopping cycle and wash it thoroughly. It can be hand-washed or machine-washed (follow care instructions).
- Awọn sensọ: Wipe the cliff sensors, wall sensors, and charging contacts with a clean, dry cloth to ensure proper function.
- Awọn kẹkẹ: Clean any hair or debris from the robot's wheels.
6. Laasigbotitusita
If you encounter issues with your Conga Z100 X-Treme, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Robot ko ni tan-an. | Batiri kekere; bọtini agbara ko tẹ daradara. | Place robot on charging station; press and hold power button for 3 seconds. |
| Rọ́bọ́ọ̀tì kò lè rí ibùdó gbigba agbára. | Station obstructed; robot too far from station. | Ensure clear space around station; manually place robot closer to station. |
| Iṣẹ ṣiṣe mimọ ti ko dara. | Brushes or filters dirty/worn; dust bin full. | Clean/replace brushes and filters; empty dust bin. |
| Robot di nigbagbogbo. | Obstacles (cables, small objects); uneven surfaces. | Clear the cleaning area of obstacles; use virtual walls/no-go zones in app. |
| App Asopọmọra oran. | Incorrect Wi-Fi password; router too far; app outdated. | Verify Wi-Fi credentials; move robot closer to router; update app; reset robot's Wi-Fi. |
| Mopping leaves streaks or is ineffective. | Mop pad dirty/worn; clean water tank empty; dirty water tank full. | Clean/replace mop pad; refill clean water tank; empty dirty water tank. |
| Aṣiṣe fifa omi. | Pump malfunction; blockage in water lines. | Check for blockages; contact customer support if issue persists. |
For persistent issues not covered here, please refer to the official Cecotec support channels.
7. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Cecotec |
| Orukọ awoṣe | Conga Z100 X-Treme |
| Nọmba awoṣe | A01_EU01_119672 |
| Agbara afamora | 20000 Pa |
| Agbara Batiri | 5200 mAh |
| Imọ-ẹrọ lilọ kiri | AI with LaserEye |
| Eto Mopping | AquaCycle Professional Mopping, Wet&Protect Technology, Bimaterial XXL Mop |
| Self-Emptying Station | Yes, with hot air mop drying |
| Eruku Apo Agbara | 3 liters |
| Mọ Omi ojò Agbara | 3 liters |
| Idọti Omi ojò Agbara | 3 liters |
| Robot Dimensions (L x W x H) | 35.2 x 35.2 x 10.5 cm |
| Robot iwuwo | 4.92 kg |
| Voltage | 240 Volts |
| Iṣakoso Iru | App Iṣakoso |
8. Atilẹyin ọja ati Support
Your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or to inquire about replacement parts and consumables, please contact Cecotec customer service through their official webaaye tabi alaye olubasọrọ ti a pese ninu iwe atilẹyin ọja rẹ.
Always ensure you have your product model number (A01_EU01_119672) and proof of purchase available when contacting support.
