Pard USA Bobcat 480 Thermal Monocular Instruction Manual

1. Ọja Ipariview

The Pard USA Bobcat 480 is a compact thermal imaging monocular designed for observation and ranging. It features a 35mm objective lens, 3.5x optical magnification, and 8x digital zoom, providing clear thermal visibility across various distances. The device incorporates a 480x360 thermal sensor with a 12µm pixel pitch and a sensitivity of ≤18mk, allowing for detection of subtle temperature differences. An integrated laser rangefinder (LRF) offers accurate distance measurements up to 1,000 meters (1,094 yards). The vivid 1920x1080 OLED display enhances image brightness, detail, and contrast. Its compact dimensions (1.77 x 2.13 x 6.14 inches) ensure portability and ease of use in diverse conditions.

Awọn ẹya pataki:

• 35mm objective lens with 3.5x optical and 8x digital zoom.
• 480x360 thermal sensor with 12µm pixels for enhanced clarity.
• Built-in laser rangefinder (LRF) accurate up to 1,000 meters (1,094 yards).
• NETD ≤18mk sensor for detecting small heat signatures.
• 1920x1080 OLED display for bright and sharp contrast.
• Petele Field ti View (FOV): 16.5 m @100 m (11.7° diagonal FOV).
• Compact size: 1.77 x 2.13 x 6.14 inches for portability.

2. Irinše ati idari

Familiarize yourself with the physical components and control buttons of your Bobcat 480 monocular.

Nọmba 2.1: Akọkọ view of the Pard USA Bobcat 480 Thermal Monocular, showcasing apẹrẹ iwapọ rẹ ati imudani ergonomic.

Nọmba 2.2: Iwaju view of the monocular, highlighting the 35mm objective lens and integrated laser rangefinder components.

Nọmba 2.3: Pro ẹgbẹfile of the monocular, showing the arrangement of the control buttons for power, zoom, menu, and rangefinding.

Nọmba 2.4: Oke-isalẹ view illustrating the layout of the control buttons and the eyepiece adjustment dial.

Awọn iṣẹ bọtini:

• Bọtini agbara: Tẹ mọlẹ lati fi agbara tan/pa a.
• Zoom/LRF Button: Short press to activate laser rangefinder. Long press to adjust digital zoom levels.
• Bọtini Akojọ: Wọle si akojọ aṣayan akọkọ fun awọn eto ati awọn aṣayan.
• Mode/Palette Button: Cycle through different thermal color palettes (e.g., White Hot, Black Hot, Red Hot, Color).
• Eyepiece Adjustment: Rotate the dial near the eyepiece to adjust diopter for clear focus.
• Ibudo USB-C: Located at the bottom, used for charging and data transfer. Covered by a protective cap.
• Tripod Oke: Standard 1/4-20 thread for mounting on tripods or other accessories.

3. Eto

3.1 Fifi sori batiri

The Bobcat 480 uses a replaceable 18650 rechargeable battery. To install or replace the battery:

1. Locate the battery compartment on the side of the monocular.
2. Ṣii ideri iyẹwu batiri naa.
3. Insert the 18650 battery according to the polarity indicators (+/-) inside the compartment.
4. Pa ideri batiri naa ni aabo.

3.2 Gbigba agbara

Lati gba agbara si batiri naa:

1. Connect the provided USB-C cable to the monocular's USB-C port.
2. Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, power bank).
3. Ìmọ́lẹ̀ àmì ẹ̀rọ náà yóò fi ipò agbára ìgbara hàn.
4. Alternatively, the 18650 battery can be charged using an external battery charger (included).

4. Awọn ilana Iṣiṣẹ

4.1 Agbara Tan / Pa

• Agbara Tan: Press and hold the Power Button for approximately 3 seconds until the display activates.
• Agbara Pa: Press and hold the Power Button for approximately 3 seconds until the display shuts down.
• Ipo Imurasilẹ: The device may enter standby mode automatically when inverted or laid down to conserve battery.

4.2 Ipilẹ isẹ

• Atunṣe idojukọ: Rotate the eyepiece adjustment dial to achieve a sharp image for your vision.
• Sun-un: Use the Zoom/LRF button to cycle through available digital zoom levels.
• Awọn Paleti Igbona: Press the Mode/Palette button to switch between different thermal display modes (e.g., White Hot, Black Hot, Red Hot, Color).
• Oluwari Rangefinder: Short press the Zoom/LRF button to activate the laser rangefinder and measure distances.

5. Itọju

5.1 Ninu

• Awọn lẹnsi: Use a soft, lint-free cloth (e.g., microfiber) specifically designed for optics. Gently wipe the lens surfaces to remove dust or smudges. For stubborn dirt, use a small amount of lens cleaning fluid.
• Ara: Wipe the monocular's body with a soft, damp asọ. Yago fun awọn kẹmika lile tabi awọn ohun elo abrasive.

5.2 Ibi ipamọ

• Store the monocular in a cool, dry place away from direct sunlight and extreme temperatures.
• Tí o bá ń tọ́jú rẹ̀ fún ìgbà pípẹ́, yọ bátìrì náà kúrò kí ó má ​​baà jò.
• Keep the lens caps on to protect the objective lens and eyepiece.

6. Laasigbotitusita

Awọn oran ti o wọpọ ati Awọn ojutu:

• Ẹrọ ko ni agbara lori: Ensure the battery is correctly installed and fully charged. Try replacing the battery.
• Aworan ko boju mu: Adjust the eyepiece diopter for your vision. Ensure the objective lens is clean.
• Rangefinder not working: Ensure the target is within the specified range (1,000 meters) and there are no obstructions.
• Poor thermal image quality: Check for extreme environmental conditions (e.g., heavy fog, rain) that might affect thermal performance. Ensure the lens is clean.

7. Awọn pato

8. Atilẹyin ọja ati Support

Alaye Atilẹyin ọja:

The Pard USA Bobcat 480 Thermal Monocular comes with a warranty as described by Amazon. Please refer to your purchase documentation or Amazon's warranty policies for specific details regarding coverage and duration.

Atilẹyin Onibara:

For any technical assistance, troubleshooting, or warranty claims, please contact Pard customer service or the authorized retailer from whom the product was purchased. You may also visit the official Pard store on Amazon for additional resources and support.

Pard Store on Amazon: Visit the Pard Store